CS Paper Radar

Intuitive Directional Sense Presentation to the Torso Using McKibben-Based Surface Haptic Sensation in Immersive Space

Kenta Yokoe, Tadayoshi Aoyama, Yuki Funabora, Masaru Takeuchi, Yasuhisa Hasegawa

cs.HC cs.RO ·submitted 2026-08-10 06:42 UTC · v1
top venue

Abstract

In recent years, systems that utilize immersive space have been developed in various fields. Immersive spaces often contain considerable amounts of visual information; therefore, users often fail to obtain their desired information. Therefore, various methods have been developed to guide users toward haptic sensations. However, many of these methods have limitations in terms of the intuitive perception of haptic sensation and require practice for familiarization with haptic sensation. Fabric actuators are wearable haptic devices that combine fabric and McKibben artificial muscles to provide wearers with surface haptic sensation. These sensations can be provided to a wide area of the body with intuitive perception, instead of only to a part of the body. This paper presents a novel air pressure adjustment method for whole-body motion guidance using surface haptic sensations provided by a wearable fabric actuator. The proposed system can provide users with a directional sense without visual information in an immersive space. The effectiveness of the proposed system was evaluated through subject experiments and statistical data analysis. Finally, a directional sense presentation was conducted for users performing micromanipulations in a mixed-reality space to demonstrate the applicability of the proposed system for teleoperation.

Comment
This is the accepted version of an article published in IEEE Transactions on Haptics 18(1), 244-254 (2025). DOI: 10.1109/TOH.2024.3522897. Open Access under CC BY-NC-ND 4.0
Journal ref
IEEE Transactions on Haptics, vol. 18, no. 1, pp. 244-254, 2025
DOI
10.1109/TOH.2024.3522897

Closest papers

Nearest neighbours by meaning across the whole index.

Elbow Angle Guidance System Based on Surface Haptic Sensations Elicited by Lightweight Wearable Fabric Actuator

cs.HC cs.RO ·2026-08-11 ·Kenta Yokoe, Tadayoshi Aoyama, Yuki Funabora, Masaru Takeuchi, Yasuhisa Hasegawa
published similarity 0.81
Abstract · This is the accepted version of the paper published in Proc. 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), …

The demand for wearable haptic devices has rapidly increased for various applications. However, many haptic devices interfere with the wearer's activities and movements. In addition, several haptic devices fail to elicit intuitive haptic sensations by adjusting to the natural posture of the wearer. To address these issues, we propose an elbow angle guidance system using a lightweight wearable fabric actuator. The proposed actuator is made of fabric and has two McKibben-type artificial muscles attached to it, rendering it extremely lightweight and facilitating the delivery of surface haptic sensations to intuitively induce elbow extension and flexion. The surface haptic sensation elicited by the fabric actuator is adjusted to natural body movements without interfering with the wearer's movements. Moreover, the proposed system measures and guides the elbow angle by changing the intensity of the surface haptic sensation delivered to users in real time. The accuracy of the proposed system is demonstrated through experiments involving human participants.

0.65

Intuitive Hand Positional Guidance Using McKibben-Based Surface Tactile Sensations to Shoulder and Elbow

cs.HC cs.RO ·2026-08-10 ·Kenta Yokoe, Yuki Funabora, Tadayoshi Aoyama
top venuehighly cited similarity 0.76
Abstract · This is the accepted version of an article published in IEEE Robotics and Automation Letters 10(4), 3254-3261 (2025). DOI: 10.1109/LRA.2025.…

Hand positional guidance with intuitive perception is crucial for enhancing user interaction and task performance in immersive environments. However, conventional hand positional guidance methods, relying on tactile sensations, lack intuitiveness. Consequently, users require instruction on the relationship between the tactile sensation and target position of the guidance before using these methods. Additionally, the user needs training to become familiar with tactile sensations. This study presents a hand positional guidance system with intuitive perception that leverages McKibben-based surface tactile sensations directed to the shoulder and elbow. We developed a wearable fabric actuator that provides McKibben-based surface tactile sensations to induce six specific movements: elbow flexion, extension, shoulder abduction, adduction, horizontal abduction, and horizontal adduction. The effectiveness of the actuator was experimentally validated, demonstrating its high accuracy in intuitively inducing six movements. An algorithm based on the equilibrium point hypothesis and Weber-Fechner law was implemented to regulate the intensity of the tactile sensations for hand positional guidance. Furthermore, the accuracy and speed of the proposed system were compared with that of conventional guidance methods utilizing synthesized speech and vibrotactile guidance.

0.78

Hugging Suit: Pneumatically-Actuated System Design for Remote Haptic Experiences

cs.HC cs.ET ·2026-10-06 ·Russian, Wu, Luke Hespanhol, Marius Hoggenmueller, Hannes Waldschütz +1 more
published similarity 0.71
Abstract · Accepted Work in Progress at the IEEE World Haptics Conference 2025, July 8-11, 2025, Suwon, South Korea. 2 pages, 1 figure

The COVID-19 pandemic emphasised the importance of remote emotional communication and highlighted a gap in existing technologies that lack haptic channels. While video calls maintain visual and auditory presence, they cannot convey the emotional depth of physical contact, especially hugging, a universally recognised form of intimacy and support. To explore this challenge, we developed the Hugging Suit, a pneumatically-actuated wearable system that enables users to simulate and receive remote hugs in real time. Unlike prior haptic systems that focus solely on tactile sensation, our approach integrates both technical and experiential considerations. The system integrates a programmable Air Actuator Matrix (AAM), a portable high-pressure pneumatic unit, and a fabric-based pressure sensor layer, enabling precise, wearable haptic feedback while remaining lightweight and mobile. Guided by a Research through Design (RtD) methodology, we iteratively refined the prototype to improve tactile resolution, overall usability, and user comfort, while introducing modular components to support flexible and scalable haptic configurations. In parallel, we explored how specific contextual factors, such as lighting, privacy, and the visibility of the remote partner, might shape the emotional and perceptual experience of receiving a remote hug. Preliminary feedback suggests that low-lit, private spaces, especially when users could also see their remote partner via video, improved emotional engagement and comfort during mediated haptic experiences. Our low-cost, maker-space-friendly approach contributes to affective haptics applications in long-distance relationships, emotional regulation, and remote therapeutic support.

0.29

Selfrionette: A Fingertip Force-Input Controller for Continuous Full-Body Avatar Manipulation and Diverse Haptic Interactions

cs.HC ·2026-11-02 ·Takeru Hashimoto, Yutaro Hirao
top venuehighly cited similarity 0.63
Abstract · 14 pages, 12 figures. Author-prepared version of the UIST 2024 paper. Both authors contributed equally

We propose Selfrionette, a controller that uses fingertip force input to drive avatar movements in virtual reality (VR). This system enables users to interact with virtual objects and walk in VR using only fingertip force, overcoming physical and spatial constraints. Additionally, by fixing users' fingers, it provides users with counterforces equivalent to the applied force, allowing for diverse and wide dynamic range haptic feedback by adjusting the relationship between force input and virtual movement. To evaluate the effectiveness of the proposed method, this paper focuses on hand interaction as a first step. In User Study 1, we measured usability and embodiment during reaching tasks under Selfrionette, body tracking, and finger tracking conditions. In User Study 2, we investigated whether users could perceive haptic properties such as weight, friction, and compliance under the same conditions as User Study 1. Selfrionette was found to be comparable to body tracking in realism of haptic interaction, enabling embodied avatar experiences even in limited spatial conditions.

0.61

A Wearable Pneumatic Device for Continuous, Closed-Loop, Bidirectional Tactile Interaction

cs.RO ·2026-09-01 ·Cosima du Pasquier, Aliyah Smith, Serin Huber, Joshua Phelps, Ilana A. Cohen +3 more
similarity 0.63
Abstract

We present a system of two wearable pneumatic haptic devices that supports continuous, closed-loop, bidirectional tactile interaction at perceptually relevant force and temporal scales. A single device can contain up to twelve pressure sensing channels connected to textile-based pneumatic pouches. Each channel in a device can be used as a sensor, an actuator, or both. As an actuator with integrated sensing, the channel generates stable skin indentation through local closed-loop control. As a sensor, a channel can be mounted (or worn) on any surface, including on a robot gripper or on the human body, and used to measure touch interactions with the environment or a human user. A distributed architecture supports sustained pressure output, rapid dynamic response, and wireless pairing of identical devices in a system to transmit and reproduce tactile pressure signals in real time. Device-level characterization demonstrates force bandwidth exceeding 30 Hz, rapid and well-damped step responses, and extended pressure retention compared to prior compact pneumatic platforms. Human studies show that pressure-based fingertip feedback enables discrimination of force and stiffness, improves teleoperated manipulation by reducing applied pressures by up to 23.1% and task duration by up to 27.4%, and lowers subjective mental workload by 18.8%, particularly under visually constrained conditions. By unifying tactile sensing and haptic feedback within a single pneumatic modality, the device provides a practical foundation for bidirectional touch interaction in teleoperation.

0.14

A Multimodal Haptic Interface for Simultaneous Softness and Thermal Modulation

cs.RO cs.HCeess.SY ·2026-11-05 ·Joshua Brown, Fernando Bello, Lynette Jones
published similarity 0.62
Abstract · Published at EuroHaptics 2026

Haptic interactions, such as touching an object in virtual reality, involve detecting a plethora of sensations through the skin. Whilst tactile displays exist to simulate and manipulate all of these cues individually, little progress has been made constructing devices that can control multiple cues simultaneously. This paper presents a tactile display technology that offers both softness and temperature change. A prototype display, based on particle jamming and the thermal transfer of heated and cooled water, is evaluated in terms of its ability to change both stiffness and temperature. Mechanical evaluations demonstrate controllable stiffness increase of 300%, whilst thermal characterisation showed strong surface uniformity and a range of achievable temperatures from 10°C up to 50°C, with closed-loop control maintaining a 0.2°C error from a setpoint. This work advances the design of multimodal tactile displays with applications to perceptual research, medical simulation, and affective haptics.

0.66

Immersive Micromanipulation Integrating Pipette and Injector Operations with McKibben-Based Haptic Sensations for Workload Reduction

cs.HC cs.RO ·2026-08-10 ·Kenta Yokoe, Sumiwa Saito, Yuki Funabora, Tomoko Isomura, Tadayoshi Aoyama
published similarity 0.60
Abstract · This is the accepted version of an article published in IEEE Access 14, 116393-116404 (2026). DOI: 10.1109/ACCESS.2026.3717843. Open Access …

Intracytoplasmic sperm injection (ICSI) requires advanced micromanipulation techniques but relies solely on visual feedback and involves frequent interface switching between pipette movement and injector operations. Existing haptic feedback systems primarily focus on pipette puncture forces and do not provide feedback on injector states. We developed an immersive micromanipulation system that unifies operational interfaces and provides McKibben-based haptic sensations to represent aspiration, discharge, and contact between the oocyte and pipette. Users operated both the pipette and injector with a single hand while receiving haptic sensations. A human-participant experiment revealed that the immersive operation interface improved micromanipulation speed and reduced cognitive workload of the micromanipulation compared with conventional methods. Additionally, McKibben-based haptic sensations improved overall system usability. The immersive micromanipulation system with McKibben-based haptic sensations successfully unified operational interfaces and reduced operator workload.

0.28

Visual-to-Haptic Augmentation in XR: A Wearable Glove for Perceptual Grounding in Multimodal Interaction

cs.HC cs.MM ·2026-08-11 ·Faisal Mohd, Hamdi Elsaddik, Erhan Baturay Onural, Jihong Zhang, Fedwa Laamarti +1 more
top venue similarity 0.60
Abstract · 11 pages, 4 figures. Published in the Proceedings of the 1st Workshop on Shaping Future Human Connection: Social Augmentation through XR Tec…

Extended Reality (XR) systems increasingly deliver high-fidelity visual and auditory experiences, yet tactile perception remains comparatively underutilized as a modality for enriching embodied interaction. This work presents a visual-to-haptic wearable glove and a feature-based visual-to-haptic mapping algorithm that translates spatial and temporal visual features from images and videos into distributed vibrotactile patterns. The proposed method extracts motion, edge, and brightness cues and fuses them into actuator-level intensity maps aligned with a 29-actuator glove arranged in a five-by-seven layout. The system is implemented through a modular four-layer architecture comprising the XR environment, media content handling, visual-to-haptic processing, and embedded haptic hardware. A within-subject user study (N = 20) compared visual-only interaction with visual-plus-haptic augmentation across texture-based and dynamic video scenarios. Results indicate that tactile augmentation significantly improves perceived realism in dynamic video scenarios and enhances immersion and visual-tactile correspondence across conditions, with stronger and more consistent effects observed for dynamic visual events. While the current implementation operates in a single-user, offline-synchronized configuration, the findings demonstrate that vision-driven tactile augmentation can function as a perceptual enhancement layer within multimodal XR systems. Such a layer may provide a foundation for future socially enriched XR environments where coherent multisensory grounding supports higher-level interaction and communication.

0.40