CS Paper Radar

Selfrionette: A Fingertip Force-Input Controller for Continuous Full-Body Avatar Manipulation and Diverse Haptic Interactions

Takeru Hashimoto, Yutaro Hirao

cs.HC ·submitted 2026-11-02 12:47 UTC · v1
top venuehighly cited

Abstract

We propose Selfrionette, a controller that uses fingertip force input to drive avatar movements in virtual reality (VR). This system enables users to interact with virtual objects and walk in VR using only fingertip force, overcoming physical and spatial constraints. Additionally, by fixing users' fingers, it provides users with counterforces equivalent to the applied force, allowing for diverse and wide dynamic range haptic feedback by adjusting the relationship between force input and virtual movement. To evaluate the effectiveness of the proposed method, this paper focuses on hand interaction as a first step. In User Study 1, we measured usability and embodiment during reaching tasks under Selfrionette, body tracking, and finger tracking conditions. In User Study 2, we investigated whether users could perceive haptic properties such as weight, friction, and compliance under the same conditions as User Study 1. Selfrionette was found to be comparable to body tracking in realism of haptic interaction, enabling embodied avatar experiences even in limited spatial conditions.

Comment
14 pages, 12 figures. Author-prepared version of the UIST 2024 paper. Both authors contributed equally
Journal ref
Proceedings of the 37th Annual ACM Symposium on User Interface Software and Technology (UIST '24), Article 137, pp. 1-14 (2024)
DOI
10.1145/3654777.3676409

Closest papers

Nearest neighbours by meaning across the whole index.

Comparing Haptic Feedback Across Hand Tracking and Controllers in VR Object Interaction Tasks

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather, Kiyoshi Kiyokawa
published similarity 0.84
Abstract

Hand tracking offers natural VR interaction but lacks controllers' inherent tactile feedback, while haptic feedback across input methods remains understudied. We conducted a participant study comparing vibration, impulse, and no feedback in hand- and controller-based VR interaction across grasp-, pinch-, and tap-like gestures assessing performance, workload, and preference. A custom glove and controller-mounted device provided both feedback types, aiming for consistency across input modalities. Controllers were faster for grasp and pinch, whereas hand tracking was more accurate for pinch and preferred overall. Haptics had limited performance effects, although impulse reduced grasp accuracy with controllers. Participants preferred vibration and impulse over no haptic feedback, favouring vibration overall. Our findings reveal a more nuanced relationship between haptic feedback, input device, and interaction context than suggested by previous work.

0.36

Comparing Hand and Controller Avatars with Hand Tracking and Controller-Based Interaction

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather
top venuehighly cited similarity 0.77
Abstract

Previous research suggests that the congruency between common VR input devices - such as controllers or hand tracking - and their visual representations (e.g., hand or controller avatars) influences user experience and performance. However, the specific effects of input-avatar combinations remain underexplored. We study the effects of common input devices (hand tracking and controllers) and visual representations (hand and controller avatars) on performance and perceived success in target acquisition tasks. We included both grasping and pinching gestures across 16 combinations of input, avatar, and target size. Results indicate that hand tracking benefits from any form of visual representation - even when mismatched - achieving up to 5.8% greater accuracy compared to having no avatar, likely due to its reliance on visual feedback in the absence of a physical prop. Controllers were generally preferred and offered faster task completion. However, mismatched avatars had a stronger negative effect with controllers, particularly when the virtual gesture did not align with the physical action, leading to a 5.6% drop in accuracy compared to the matched condition - suggesting that inaccurate feedback can be more disruptive than having no avatar feedback at all.

0.65

TapID: Rapid touch interaction in virtual reality using wearable sensing

cs.HC eess.SP ·2026-10-19 ·Manuel Meier, Paul Streli, Andreas Fender, Christian Holz
top venuepositionhighly cited similarity 0.76
Abstract · accepted to IEEE VR 2021

Current Virtual Reality systems typically use cameras to capture user input from controllers or free-hand mid-air interaction. In this paper, we argue that this is a key impediment to productivity scenarios in VR, which require continued interaction over prolonged periods of time---a requirement that controller or free-hand input in mid-air does not satisfy. To address this challenge, we bring rapid touch interaction on surfaces to Virtual Reality---the input modality that users have grown used to on phones and tablets for continued use. We present TapID, a wrist-based inertial sensing system that complements headset-tracked hand poses to trigger input in VR. TapID embeds a pair of inertial sensors in a flexible strap, one at either side of the wrist; from the combination of registered signals, TapID reliably detects surface touch events and, more importantly, identifies the finger used for touch. We evaluated TapID in a series of userstudies on event-detection accuracy (F1 = 0.997) and hand-agnostic finger-identification accuracy (within-user: F1 = 0.93; across users: F1 = 0.91 after 10 refinement taps and F1 = 0.87 without refinement) in a seated table scenario. We conclude with a series of applications that complement hand tracking with touch input and that are uniquely enabled by TapID, including UI control, rapid keyboard typing and piano playing, as well as surface gestures.

0.63

Beyond the Mirror: Balancing Interaction Modality and Avatar Fidelity in Public 3D Virtual Try-On Systems

cs.HC ·2026-08-24 ·Yueqian Guo, Tianzhao Li, Xin Lv
similarity 0.73
Abstract

Virtual Try-On (VTON) systems deployed on large public displays face a dual barrier: the physical strain of mid-air interaction and the social inhibition caused by public self-consciousness. This paper presents a real-time 3D avatar system integrating markerless motion capture with dynamic visual fidelity control to investigate and mitigate both barriers. Through a dual-study empirical evaluation, we first decoupled physical fatigue from gesture interaction ($N=20$), demonstrating that interaction fatigue is primarily driven by visuomotor latency rather than the physical act of gesturing; our optimized low-latency gesture pipeline achieved usability comparable to touchscreens while delivering superior immersion and hygiene. Building on these insights, our second study ($N=25$) investigated the "avatar fidelity paradox" via a $2 \times 2$ factorial design manipulating interaction modality (gestures vs. touch) and visual fidelity (photorealistic MetaHuman vs. stylized mannequin). Results reveal that while high fidelity and mid-air gestures independently maximize virtual embodiment ($p < .05$), their combination elicits the highest social awkwardness. Crucially, low-fidelity avatars serve as a "psychological mask" that alleviates public embarrassment during expressive gestures, while mid-air gestures simultaneously act as a compensatory mechanism to preserve perceived try-on trust despite reduced visual realism. Finally, we propose a context-aware fidelity framework to balance privacy, immersion, and commercial trust in public spatial interactions.

0.08

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.70
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.05

Tactile Search: Enhancing Targeting in 3D Space

cs.HC ·2026-09-05 ·Amber Maimon, Iddo Yehoshua Wald, Jonas Keppel, Eunhee Chang, Yoshifumi Kitamura +3 more
top venue similarity 0.68
Abstract · Accepted to the 2026 IEEE International Symposium on Mixed and Augmented Reality (ISMAR 2026)

Visual search is crucial in daily life, from scanning for relevant information to spotting signs of danger. When sensory channels are overloaded or degraded, cognitive tasks can be supported by crossmodal information representations through vibrotactile cues. We introduce Tactile Search, an approach that uses modulation of frequency and amplitude of vibrations to the hands, for guiding attention to the location of objects in 3D space. We evaluated this approach in a competitive VR game where participants searched for targets using both vision and touch. Across two studies -- an in-the-wild demonstration (n=55) and a controlled laboratory experiment (n=28) -- we found that vibrotactile feedback significantly improved performance and increased user confidence. In the combined haptic condition, performance did not differ across target heights. We further analyzed participants' subjective experiences and search strategies highlighting the benefits of the tactile cues. Our findings suggest that Tactile Search can enhance interaction and provide design considerations for integrating haptic search into interactive systems.

0.24

Beyond Task Performance: Lessons Learned from Evaluating an Exploratory VR Interaction Technique

cs.HC ·2026-09-21 ·Nevzat Umut Demirseren, Corey Pittman, Isayas Berhe Adhanom, Karthikeyan Umapathy, Kevin Pfeil
similarity 0.68
Abstract · 6 pages, 10 figures

Dense virtual environments present significant challenges for object selection and manipulation, motivating the development of novel interaction techniques. This paper presents RodCast as an exploratory case study to investigate explicit trajectory visualization for interaction in dense virtual environments. We conducted a within-subjects user study comparing RodCast with Go-Go Hand and FlowerCone across three representative interaction tasks using objective performance measures, subjective evaluations, and qualitative feedback. The results revealed that the proposed implementation incurred performance costs on more demanding manipulation tasks, while qualitative feedback suggested that participants attributed these challenges to the complexity of the bimanual control scheme. Additionally, subjective evaluations and qualitative feedback identified benefits in spatial awareness and target accessibility that were not fully reflected by conventional performance measures. Together, these findings highlight the importance of control simplicity in interaction technique design and emphasize that incorporating qualitative feedback into the evaluation process is essential for distinguishing implementation limitations from the potential of the interaction concept. Collectively, these lessons provide guidance for the design and evaluation of future interaction techniques.

0.26

Visual-to-Haptic Augmentation in XR: A Wearable Glove for Perceptual Grounding in Multimodal Interaction

cs.HC cs.MM ·2026-08-11 ·Faisal Mohd, Hamdi Elsaddik, Erhan Baturay Onural, Jihong Zhang, Fedwa Laamarti +1 more
top venue similarity 0.68
Abstract · 11 pages, 4 figures. Published in the Proceedings of the 1st Workshop on Shaping Future Human Connection: Social Augmentation through XR Tec…

Extended Reality (XR) systems increasingly deliver high-fidelity visual and auditory experiences, yet tactile perception remains comparatively underutilized as a modality for enriching embodied interaction. This work presents a visual-to-haptic wearable glove and a feature-based visual-to-haptic mapping algorithm that translates spatial and temporal visual features from images and videos into distributed vibrotactile patterns. The proposed method extracts motion, edge, and brightness cues and fuses them into actuator-level intensity maps aligned with a 29-actuator glove arranged in a five-by-seven layout. The system is implemented through a modular four-layer architecture comprising the XR environment, media content handling, visual-to-haptic processing, and embedded haptic hardware. A within-subject user study (N = 20) compared visual-only interaction with visual-plus-haptic augmentation across texture-based and dynamic video scenarios. Results indicate that tactile augmentation significantly improves perceived realism in dynamic video scenarios and enhances immersion and visual-tactile correspondence across conditions, with stronger and more consistent effects observed for dynamic visual events. While the current implementation operates in a single-user, offline-synchronized configuration, the findings demonstrate that vision-driven tactile augmentation can function as a perceptual enhancement layer within multimodal XR systems. Such a layer may provide a foundation for future socially enriched XR environments where coherent multisensory grounding supports higher-level interaction and communication.

0.40