CS Paper Radar

Beyond the Mirror: Balancing Interaction Modality and Avatar Fidelity in Public 3D Virtual Try-On Systems

Yueqian Guo, Tianzhao Li, Xin Lv

cs.HC ·submitted 2026-08-24 14:57 UTC · v1

Abstract

Virtual Try-On (VTON) systems deployed on large public displays face a dual barrier: the physical strain of mid-air interaction and the social inhibition caused by public self-consciousness. This paper presents a real-time 3D avatar system integrating markerless motion capture with dynamic visual fidelity control to investigate and mitigate both barriers. Through a dual-study empirical evaluation, we first decoupled physical fatigue from gesture interaction ($N=20$), demonstrating that interaction fatigue is primarily driven by visuomotor latency rather than the physical act of gesturing; our optimized low-latency gesture pipeline achieved usability comparable to touchscreens while delivering superior immersion and hygiene. Building on these insights, our second study ($N=25$) investigated the "avatar fidelity paradox" via a $2 \times 2$ factorial design manipulating interaction modality (gestures vs. touch) and visual fidelity (photorealistic MetaHuman vs. stylized mannequin). Results reveal that while high fidelity and mid-air gestures independently maximize virtual embodiment ($p < .05$), their combination elicits the highest social awkwardness. Crucially, low-fidelity avatars serve as a "psychological mask" that alleviates public embarrassment during expressive gestures, while mid-air gestures simultaneously act as a compensatory mechanism to preserve perceived try-on trust despite reduced visual realism. Finally, we propose a context-aware fidelity framework to balance privacy, immersion, and commercial trust in public spatial interactions.

Closest papers

Nearest neighbours by meaning across the whole index.

Selfrionette: A Fingertip Force-Input Controller for Continuous Full-Body Avatar Manipulation and Diverse Haptic Interactions

cs.HC ·2026-11-02 ·Takeru Hashimoto, Yutaro Hirao
top venuehighly cited similarity 0.73
Abstract · 14 pages, 12 figures. Author-prepared version of the UIST 2024 paper. Both authors contributed equally

We propose Selfrionette, a controller that uses fingertip force input to drive avatar movements in virtual reality (VR). This system enables users to interact with virtual objects and walk in VR using only fingertip force, overcoming physical and spatial constraints. Additionally, by fixing users' fingers, it provides users with counterforces equivalent to the applied force, allowing for diverse and wide dynamic range haptic feedback by adjusting the relationship between force input and virtual movement. To evaluate the effectiveness of the proposed method, this paper focuses on hand interaction as a first step. In User Study 1, we measured usability and embodiment during reaching tasks under Selfrionette, body tracking, and finger tracking conditions. In User Study 2, we investigated whether users could perceive haptic properties such as weight, friction, and compliance under the same conditions as User Study 1. Selfrionette was found to be comparable to body tracking in realism of haptic interaction, enabling embodied avatar experiences even in limited spatial conditions.

0.61

Comparing Hand and Controller Avatars with Hand Tracking and Controller-Based Interaction

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather
top venuehighly cited similarity 0.71
Abstract

Previous research suggests that the congruency between common VR input devices - such as controllers or hand tracking - and their visual representations (e.g., hand or controller avatars) influences user experience and performance. However, the specific effects of input-avatar combinations remain underexplored. We study the effects of common input devices (hand tracking and controllers) and visual representations (hand and controller avatars) on performance and perceived success in target acquisition tasks. We included both grasping and pinching gestures across 16 combinations of input, avatar, and target size. Results indicate that hand tracking benefits from any form of visual representation - even when mismatched - achieving up to 5.8% greater accuracy compared to having no avatar, likely due to its reliance on visual feedback in the absence of a physical prop. Controllers were generally preferred and offered faster task completion. However, mismatched avatars had a stronger negative effect with controllers, particularly when the virtual gesture did not align with the physical action, leading to a 5.6% drop in accuracy compared to the matched condition - suggesting that inaccurate feedback can be more disruptive than having no avatar feedback at all.

0.65

Wait for It: A Component-Level Analysis of Latency Feedback Mechanisms for LLM Agents in VR

cs.HC ·2026-10-16 ·Pratham Arora, Abhinav Lodha, Siddharth Siddharth
similarity 0.69
Abstract

Delays in AI responses pose a significant challenge to immersive Virtual Reality experiences. While previous research demonstrates that feedback can reduce the perception of waiting, we lack understanding of which types work best and why. We conducted a within-subjects study with 18 participants to systematically compare three isolated feedback approaches during VR agent interactions: verbal fillers (e.g., um..., hmm...), visual indicators (loading spinners), and embodied gestures (thinking animations). Our results revealed that embodied gestures significantly outperformed visual loading indicators across multiple dimensions, making agents feel more lifelike and socially present. Interestingly, explicit visual feedback like loading spinners actually degraded perceived humanness and broke immersion by forcing users to shift from social to technical mental models. These findings suggest that natural, behavior-based feedback maintains the illusion of conversing with a thinking entity, while technical indicators expose the computational substrate. We present empirically-grounded design guidelines for creating more engaging AI-powered VR agents.

0.08

A Browser-Based Gesture-Driven Avatar Interaction Framework for Metaverse Onboarding Environments

cs.HC cs.GR ·2026-08-12 ·Deepti Parachuri, Chhayank Sahu, Sameer Singh Choudhary
similarity 0.67
Abstract · 6 pages, 4 figures, 2 tables

Avatar interaction shapes how engaging and immersive a metaverse experience feels, and for that interaction to feel natural, avatars need to respond to users without forcing them through a controller-based interface first. This paper describes a gesture-driven interaction layer built for a browser-based metaverse onboarding environment, where users explore a set of virtual rooms as an avatar and interact with embedded video, document, and quiz content using hand, arm, and head gestures instead of a keyboard or controller. The system combines real-time gesture recognition (Google MediaPipe) with two alternative locomotion techniques - hand-raise navigation and in-place walking - so users can trade off precision against physical immersion depending on the task. The contribution is the integration, deployment, and evaluation of these techniques as a single lightweight, web-deployable, controller-free interaction model, assessed through a structured internal onboarding session with five participants. We report what worked, what didn't, and the design trade-offs that came out of combining these techniques in one deployed system.

0.07

TapID: Rapid touch interaction in virtual reality using wearable sensing

cs.HC eess.SP ·2026-10-19 ·Manuel Meier, Paul Streli, Andreas Fender, Christian Holz
top venuepositionhighly cited similarity 0.66
Abstract · accepted to IEEE VR 2021

Current Virtual Reality systems typically use cameras to capture user input from controllers or free-hand mid-air interaction. In this paper, we argue that this is a key impediment to productivity scenarios in VR, which require continued interaction over prolonged periods of time---a requirement that controller or free-hand input in mid-air does not satisfy. To address this challenge, we bring rapid touch interaction on surfaces to Virtual Reality---the input modality that users have grown used to on phones and tablets for continued use. We present TapID, a wrist-based inertial sensing system that complements headset-tracked hand poses to trigger input in VR. TapID embeds a pair of inertial sensors in a flexible strap, one at either side of the wrist; from the combination of registered signals, TapID reliably detects surface touch events and, more importantly, identifies the finger used for touch. We evaluated TapID in a series of userstudies on event-detection accuracy (F1 = 0.997) and hand-agnostic finger-identification accuracy (within-user: F1 = 0.93; across users: F1 = 0.91 after 10 refinement taps and F1 = 0.87 without refinement) in a seated table scenario. We conclude with a series of applications that complement hand tracking with touch input and that are uniquely enabled by TapID, including UI control, rapid keyboard typing and piano playing, as well as surface gestures.

0.63

FlowAvatar: Real-Time Full-Body Avatars from Sparse Egocentric Inputs on Consumer XR Devices

cs.CV cs.HC ·2026-10-12 ·Chenfeng Gao, Taeyoung Yeon, Sungheon Park, Vasco Xu, Anish Prabhu +2 more
top venuebenchmarkcode/data similarity 0.66
Abstract · Accepted to IEEE ISMAR 2026 (Conference Track). 10 pages, 9 figures. Code: https://github.com/SPICExLAB/FlowAvatar

Prior avatar embodiment research has studied tracking completeness (how faithfully the body, hands, and face are sensed and reproduced) and personalized appearance in isolation, each requiring specialized lab equipment. How these factors interact on consumer hardware remains an open question, because no existing system unifies body pose, face, hands, and personalized appearance on a standalone headset. We present FlowAvatar, a system enabling real-time personalized look-alike avatars with full-body pose, hand articulation, facial expression, and eye gaze tracking from sparse egocentric inputs on consumer XR devices (Meta Quest Pro). Our pose model achieves competitive spatial accuracy and state-of-the-art temporal consistency on the AMASS benchmark against prior works with comprehensive spatial and temporal losses validated through architecture and loss ablations, while running in real-time. Two user studies (N=12, N=10) provide converging evidence that tracking completeness and personalized appearance serve complementary roles: tracking completeness broadly improves perceived motion quality, while only their combination achieves positive total embodiment.

0.62

Comparing Haptic Feedback Across Hand Tracking and Controllers in VR Object Interaction Tasks

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather, Kiyoshi Kiyokawa
published similarity 0.65
Abstract

Hand tracking offers natural VR interaction but lacks controllers' inherent tactile feedback, while haptic feedback across input methods remains understudied. We conducted a participant study comparing vibration, impulse, and no feedback in hand- and controller-based VR interaction across grasp-, pinch-, and tap-like gestures assessing performance, workload, and preference. A custom glove and controller-mounted device provided both feedback types, aiming for consistency across input modalities. Controllers were faster for grasp and pinch, whereas hand tracking was more accurate for pinch and preferred overall. Haptics had limited performance effects, although impulse reduced grasp accuracy with controllers. Participants preferred vibration and impulse over no haptic feedback, favouring vibration overall. Our findings reveal a more nuanced relationship between haptic feedback, input device, and interaction context than suggested by previous work.

0.36

Remote Expert Evaluation of Tabletop Avatar Gaze Control in Asymmetric Multi-Scale MR--VR Collaboration

cs.HC ·2026-10-19 ·Carlos Mosquera, Neven Elsayed, Ernst Kruijff, Joseph Newman, Valeriya Lehrbaum +1 more
publishedsurvey similarity 0.64
Abstract · Accepted for ACM Symposium on Virtual Reality Software and Technology (VRST) 2026

This paper proposes an integrated setup for a multi-scale asymmetric collaboration scenario in the context of a remote-expert use case, focusing on the expert side. In this system, the remote expert (with an exocentric view in Mixed Reality (MR)) uses a Tangible User Interface (TUI) to precisely position and rotate their avatar within a scaled tabletop World-in-Miniature (WIM). Inside the WIM, the expert's avatar and the operator share the same scale and egocentric view, while the expert retains a global tabletop overview of the plant to support collaboration. Interviews with industry experts during the participatory design phase revealed the need for an egocentric view inside the plant on the remote-expert side to enable full collaboration. We designed and studied three interaction-visualisation combinations to integrate and control the expert avatar's gaze: VR (fully immersive with direct head control), Head (floating screen with direct head control), and Touch (on-avatar screen with touchpad control). We evaluated these methods with 29 participants across two fault-detection tasks: Same Machine, where both collaborators inspect the same machine, and Twin Machine, where they inspect identical machines in separate locations. The VR condition, which combines immersion, direct head control, and a full-scale view, yielded the strongest overall performance and user experience, while the tabletop avatar setup was well received for collaboration. Our findings inform the design of gaze-control techniques for asymmetric MR-VR collaboration and reveal challenges and opportunities for future work.

0.23