CS Paper Radar

CableDex: Cable Length Estimation on Industrial Reels Using a Handheld Device

Francisco Guillén, Ricardo Almeida, Bruno Silva, João C. Neves

cs.CV ·submitted 2026-08-10 10:19 UTC · v1

Abstract

CableDex is a computer vision system that addresses the time-consuming and inaccurate manual measurement of cable length on industrial reels from a single photograph captured with a mobile phone. The system combines camera calibration, instance segmentation, pose estimation, and volumetric calculation to estimate the cable length across five different reel types and various cable sizes. This system is based on an instance segmentation model trained on 1,000 manually annotated images, achieving 99.5\% mAP50 with an inference time of 5.66 ms per image. Evaluated on 75 reels across five reel types, the system achieves a MAPE of 4.90\%, within the 10\% error tolerance commonly accepted in industrial cable-reel measurement. The demonstration presents the end-to-end pipeline, from reel label scanning and image capture to segmentation and length estimation, through the mobile application.

Closest papers

Nearest neighbours by meaning across the whole index.

TRACE: Interactive Bi-Directional Tracing of Monochrome Cables Amid Clutter

cs.RO ·2026-09-24 ·Nidhya Shivakumar, Ethan Ransing, Josh Zhang, Shamak Gowda, Kevin Yang +4 more
published similarity 0.51
Abstract · 8 pages, 10 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026

Accurate state estimation (tracing) of Deformable Linear Objects (DLOs) such as cables is a critical challenge for data centers, manufacturing, construction, homes, and surgery, where precise cable management directly impacts operational safety and efficiency. However, resolving the state of multiple monochrome cables amid foreground and background clutter poses challenges due to occlusions, overlap, and ambiguous crossings. We present Two-way Routing And Cable Estimation (TRACE), which combines bi-directional cable tracing with interactive perception primitives-Divergence Push and Cluster Dilation-to actively resolve ambiguities. Evaluation with 110 physical experiments suggests that TRACE can increase the percentage of cable length correctly traced in complex scenarios (with up to 4 cables and 40 crossings) from ~60% with the strongest prior method, HANDLOOM 2.0, to ~90%, outperforming RT-DLO, Nano Banana Pro, and ChatGPT 5.2 as well. For a trial run on a workstation with an NVIDIA GeForce RTX 4090 GPU, the average computation time is 0.4 seconds per cable. Project website: https://trace-paper.github.io/.

0.49

TAPe+ML: A Compact Structured Representation for Multi-Task Computer Vision

cs.CV eess.IV ·2026-09-15 ·Sergey Kurinov, Alexey Upatov
code/data similarity 0.51
Abstract · 39 pages, 4 figures, 11 tables. Project page: https://ml.comexp.net Corrected the corresponding author's email address

We present TAPe+ML v3, a compact computer vision system based on TAPe (Theory of Active Perception), a structured representation that encodes relations among perceptual elements before recognition. Instead of operating directly on pixel tensors, the system uses a shared TAPe representation and a modular recognition architecture for image classification, object detection, and instance segmentation. TAPe+ML v3 combines background and contour processing, local object localization, prototype-based classification, and a coordinator for specialized submodels. Across the reported experiments, it uses fewer than 100,000 parameters. On COCO object detection, it obtains 84.7 mAP50 and 65.3 mAP50-95. On COCO instance segmentation, it obtains 80.7 mask mAP50 and 58.4 mask mAP50-95. In classification experiments, it reaches 92 percent validation accuracy on Imagenette under an identical-training comparison with a raw-pixel baseline, and 89.9 percent Top-1 accuracy on ImageNet-Real. We also evaluate compactness in video scene detection and adaptation under distribution shift in an industrial pilot. The results suggest that shifting part of the modeling burden from network parameters to a structured input representation can support compact multi-task vision systems with reduced data, memory, and compute requirements.

0.36

FishSense Lite: A Camera-Based, Single Laser Hardware Framework with Software System for In Situ Fish Length Measurement

cs.CV eess.SY ·2026-11-05 ·Christopher L. Crutchfield, Kyle Hu, Nathan Hui, Omair Qazi, Jennifer Loch +4 more
similarity 0.50
Abstract · 27 pages with 14 figures

Fish stock assessments need fish lengths paired with species from far more places than trained surveyors can reach. Recreational divers already visit many of those places, but measuring a fish underwater has required trained observers or specialist equipment. We present FishSense Lite, which recovers fish length from a single photograph taken with a recreational dive camera, a dive laser pointer, and a 3D-printed mount. The diver aims the laser at a fish and takes a picture; afterward, the dot's position in the image gives the range to the fish, and the range turns the fish's size in the image into a length. A citizen-science program, trained by the system's builders, taught its own divers and collected lengths paired with species for 73 wild fish across seven open-water dives. On seven wild fish also measured by an underwater stereo-imaging system, the two instruments agreed without detectable bias (mean difference +0.8%). On rigid targets of known length, FishSense Lite recovered every target to within 1.3%, and 99% of 1,055 frames fell within a 15% error budget. From the error sources we measure, we derive a field protocol: calibrate against a dive slate on every dive, photograph fish within 15 degrees of perpendicular and beyond 1 m, and take at least ten frames of each.

0.28

WireSeg-32K: A Physics-Grounded Synthetic Dataset for Wire Instance Segmentation

cs.CV ·2026-09-02 ·Zilin Dai, Lehong Wang, Yi Yang, Xiang Fei
publisheddatasethot direction similarity 0.47
Abstract · Best short paper at Synthetic Data for Computer Vision @ CVPR 2026 Workshop

Deformable linear objects such as wires and cables are difficult to segment because they are thin, highly deformable, and frequently self-occluded, while large-scale instance-level annotations are expensive to obtain in real scenes. Existing resources either focus on cable tracing or semantic segmentation under constrained settings, or generate visually plausible images without physically grounded wire deformation. We present WireSeg-32k, a synthetic dataset for wire instance segmentation with 32,000 RGB images, instance masks, depth maps, and a complementary real-world test set with annotations. To generate this dataset, we develop DeformX, a co-simulation pipeline that couples Cosserat-rod dynamics with photorealistic Isaac Sim rendering, enabling physically plausible, contact-consistent wire shapes, CAD-based wire assets, and diverse visually grounded scenes. As a simple baseline, LoRA fine-tuning SAM3 on WireSeg-32k alone improves real-world mAP@75 by 10.2% over the off-the-shelf model, showing that physically grounded synthetic data can transfer to real wire perception.

0.43

Metric Scale for Insta360 Structure-from-Motion from the Camera's Embedded IMU

cs.CV ·2026-10-26 ·Davide Cuttini, Diego Di Tommaso, Alessio Antoniacomi, Luca Simonetti
benchmarkcode/data similarity 0.46
Abstract · 17 pages, 9 figures, 4 tables. Dataset: https://huggingface.co/datasets/OverTheReality/OverMaps360_50

Structure-from-motion (SfM) from the dual-fisheye video of a consumer 360-degree camera recovers geometry only up to a similarity transform; in the pipeline considered here, metric scale is obtained from smartphone ARKit or ARCore poses captured alongside the camera. This paper evaluates a self-contained alternative: the IMU embedded in the Insta360 X5 and X6, recorded at 1 kHz. The sensor is characterised (noise density, camera-IMU synchronisation, accelerometer scale factor, bias stability), the camera-IMU rotation and frame timing are estimated from the data, and the scale is recovered by a linear visual-inertial alignment over the SfM poses of a whole survey. The standard formulation, with gravity and accelerometer bias shared across the survey, overestimates the scale by 3.4% on average; estimating each contiguous segment independently and averaging removes the bias. On nine surveys with a co-mounted LiDAR scanner the inertial scale deviates from the LiDAR by 0.81% in mean absolute error, against 1.94% for the smartphone scale; on printed fiducial markers both agree within the 1% uncertainty of the target. On the reference trajectories of thirty sequences of a public benchmark, brought to scales of 1/40, 1 and 40, the estimator recovers the metric scale with a mean error of -0.07% and a standard deviation of 1.28%. On fifty production surveys where the smartphone is the only reference, the two scales agree to a standard deviation of 2.3%, the inertial scale being 0.3% lower on average; the difference is uncorrelated with run length, grows with the extent of the smartphone anchor, and cannot be attributed to either reference. An ablation over window construction and a comparison with monocular metric-depth networks complete the study.

0.34

MariSat: A Maritime Dataset for Instance Segmentation of Objects in Satellite and Aerial Images

cs.CV ·2026-08-30 ·Amir Abbes, Ines Harrabi, Lucas Justin Yirepoa Kinda, Rim Trabelsi, Adnane Cabani +1 more
benchmarkdatasetcode/data similarity 0.46
Abstract

Automated maritime surveillance from satellite and aerial imagery requires large, precisely annotated datasets, which remain scarce for the instance-segmentation task, particularly for small vessels in cluttered port environments. We present MariSat, a new benchmark dataset of 1260 aerial and satellite images covering diverse port and coastal scenes, annotated at the pixel level for eight maritime object classes (sailboat, yacht, jet-ski, fishing boat, cruise ship, military vessel, tugboat and cargo ship). The dataset was produced through a semi-automatic annotation pipeline combining the textpromptable segmentation model SAM 3 with a cascade of geometric and colorimetric post-processing filters, followed by a manual correction and quality-control pass performed with the CVAT annotation platform. We describe the image-collection methodology, the annotation and correction process, and the resulting data organization. We also report class-wise statistics for the training, validation, and test splits. MariSat has already been used to fine-tune and benchmark segmentation and detection models (SAM 3 and YOLO11) for real-time maritime monitoring. We report detailed quantitative and per-class results for both tasks. The MariSat dataset is publicly available on GitHub : https://github.com/amirabbes/P2M-Maritime-Segmentation

0.35

FUSEye: Training-Light Fisheye Detection with Overlapping Views and Zero-Initialized Adapters

cs.CV cs.ROeess.IV ·2026-10-02 ·Wenya Su, Kai Luo, Di Wen, Ruiping Liu, Yufan Chen +3 more
benchmarkcode/data similarity 0.45
Abstract · Source code will be available at https://github.com/Su-wenya/FUSEye

Fisheye cameras give mobile robots a single-sensor, low-cost view of their surroundings, yet the COCO-pretrained detectors that practitioners routinely reuse fail on them: strong radial distortion warps local image structure, while boundary compression shrinks objects to near-invisible sizes. Full fine-tuning closes much of the gap but requires abundant fisheye labels and compute. We present FUSEye, a training-light framework that turns a frozen-backbone COCO-pretrained extra-large YOLO26 detector (YOLO26-x) into a fisheye detector. FUSEye adds roughly 227k new parameters while updating the inserted modules and the pretrained detection head. It addresses the transfer gap at three causally linked levels. At the input level, overlapping grid view generation and box remapping (GridViews) enlarge compressed boundary regions. At the feature level, zero-initialized residual adapters (Z-Adapters) correct distortion-induced feature misalignment. At the decision level, learned cross-projection agreement fusion (AgreeFusion) promotes low-confidence detections only when they are supported by consistent evidence across multiple views. On the WoodScape surround-view fisheye benchmark, FUSEye raises YOLO26-x from 0.148 to 0.266 mAP50 and retains 84.3% fully fine-tuned accuracy. Moreover, randomly using only 25% of the labeled training images, FUSEye achieves 0.2597 mAP50, retaining 97.6% of its full-label performance. FUSEye also consistently improves YOLOv8-11 detectors, showing that the recipe is architecture-agnostic. Source code will be available at https://github.com/Su-wenya/FUSEye.

0.32

Automatic Reproducible Camera Intrinsic Calibration

cs.RO cs.CV ·2026-09-09 ·Xiangcheng Hu
top venue similarity 0.45
Abstract · 6 pages, 7 figures

Accurate camera intrinsic calibration is fundamental to robot perception, and the accuracy depends on the quality of the collected images. However, existing target-based calibration methods often require the practitioner to manually filter out high-quality images and to specify an appropriate radial distortion order. This paper presents a fully automatic intrinsic calibration pipeline that determines both from the collected data. We adopt an iterative rejection scheme that estimates parameters on a candidate image set and removes views whose mean residual exceeds a multiple of the median. Crucially, this process runs independently under each candidate distortion order, so that the retained image set is consistent with the residual scale of that order. Further, the distortion order is selected on held-out images, with the intrinsics and distortion fixed and only the board pose re-estimated, ensuring that an added coefficient is supported by independent observations. Finally, we integrate both steps into an interactive calibration tool that supports full-pipeline data inspection and parameter estimation. Experiments on our own camera data and five public real-world datasets show that image filtering reduces the held-out reprojection error by 25\%, the order selection further by 5\%, achieving the lowest held-out mean among four compared configurations without manual image selection. We will release the code and data to facilitate future research.

0.45