CS Paper Radar

Metric Scale for Insta360 Structure-from-Motion from the Camera's Embedded IMU

Davide Cuttini, Diego Di Tommaso, Alessio Antoniacomi, Luca Simonetti

cs.CV ·submitted 2026-10-26 14:57 UTC · v2
benchmarkcode/data

Abstract

Structure-from-motion (SfM) from the dual-fisheye video of a consumer 360-degree camera recovers geometry only up to a similarity transform; in the pipeline considered here, metric scale is obtained from smartphone ARKit or ARCore poses captured alongside the camera. This paper evaluates a self-contained alternative: the IMU embedded in the Insta360 X5 and X6, recorded at 1 kHz. The sensor is characterised (noise density, camera-IMU synchronisation, accelerometer scale factor, bias stability), the camera-IMU rotation and frame timing are estimated from the data, and the scale is recovered by a linear visual-inertial alignment over the SfM poses of a whole survey. The standard formulation, with gravity and accelerometer bias shared across the survey, overestimates the scale by 3.4% on average; estimating each contiguous segment independently and averaging removes the bias. On nine surveys with a co-mounted LiDAR scanner the inertial scale deviates from the LiDAR by 0.81% in mean absolute error, against 1.94% for the smartphone scale; on printed fiducial markers both agree within the 1% uncertainty of the target. On the reference trajectories of thirty sequences of a public benchmark, brought to scales of 1/40, 1 and 40, the estimator recovers the metric scale with a mean error of -0.07% and a standard deviation of 1.28%. On fifty production surveys where the smartphone is the only reference, the two scales agree to a standard deviation of 2.3%, the inertial scale being 0.3% lower on average; the difference is uncorrelated with run length, grows with the extent of the smartphone anchor, and cannot be attributed to either reference. An ablation over window construction and a comparison with monocular metric-depth networks complete the study.

Comment
17 pages, 9 figures, 4 tables. Dataset: https://huggingface.co/datasets/OverTheReality/OverMaps360_50

Closest papers

Nearest neighbours by meaning across the whole index.

MFVINS: Multiple Fisheye Camera-Based Visual Inertial System

cs.RO cs.CV ·2026-09-08 ·Eunseong Jang, YuJin Chung, Sang Jun Lee, Jihyun Yoon, HyungGi Jo
similarity 0.68
Abstract · 29 pages, 11 figures

A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.

0.29

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.62
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

HeadIO: Body-Frame Heading Decomposition for Neural Inertial Odometry on Head-Mounted Devices

cs.CV cs.RO ·2026-11-11 ·Taeyoung Yeon, Yiquan Li, Chenfeng Gao, Vasco Xu, Karan Ahuja
benchmark similarity 0.62
Abstract · Submitted to ICRA 2027

Inertial odometry (IO) using only Inertial Measurement Units (IMUs) enables camera-free head tracking in head-mounted devices such as VR headsets, AR glasses, and earbuds. Prior IO methods operate in a gravity-aligned world frame, which is not yaw-equivariant. Yaw augmentation improves robustness but does not guarantee equivariance; learned equivariant layers achieve it, but EqNIO's full pipeline costs nearly 3$\times$ the FLOPs of ours. While raw body-frame IMU inputs are inherently yaw-invariant, head tilt redistributes both gravity and motion signals across device axes, making the representation tilt-variant. We propose HeadIO, which combines a body-frame heading decomposition with a bidirectional Mamba backbone for head-mounted inertial odometry. Our decomposition achieves tilt invariance by separating gravity-aligned and horizontal components using only the tilt component of device orientation. We evaluate on four head-mounted datasets and find that HeadIO improves RTE-5s by 8.1% (0.260 m $\to$ 0.239 m) over world-frame methods with learned equivariant layers on Nymeria, the largest benchmark dataset, at nearly 3$\times$ lower FLOPs and 8$\times$ fewer parameters. HeadIO achieves state-of-the-art performance on our primary metric, RTE-5s, on all Aria-glasses datasets, which natively provide body-frame semantics for our decomposition method. We further evaluate the IMU-only deployment scenario on Nymeria, where HeadIO remains state-of-the-art. We show that our method relies mainly on tilt accuracy, which can be obtained from the gravity signal; for yaw, a single-coefficient gyroscope correction removes 11.6% of the yaw error and improves RTE-5s by 2.5%, and sparse external yaw corrections (for example, one every 30 s) can improve RTE-5s by 12.0%. Our decomposition is lightweight, composes with any backbone, and is suitable for real-time deployment on head-mounted devices.

0.18

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.61
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

Accord: Universal Online Metric Localization and Dense Mapping from one Camera and an IMU

cs.CV ·2026-11-18 ·Jaafar Mahmoud, Arthur Movsesyan, Cuong Huynh, Mikhail Iumanov, Sergey Zagoruyko +1 more
code/data similarity 0.61
Abstract

Dense metric mapping from a single camera and IMU remains challenging: visual-inertial odometry (VIO) provides metric motion but sparse geometry, whereas feed-forward depth models predict dense structure without ensuring metric scale. We present Accord, which constructs an accurate online dense metric map from any camera with an IMU. A VIO filter publishes metric poses, a depth foundation model conditioned on them predicts depth for short keyframe windows, and a factor graph fuses the resulting submaps. Recent work has explored several approaches to this problem. What is essential is the multi-view agreement (Accord), which is considered in SLAM as a source of geometric self-consistency. Accord anchors each keyframe window to metric 3D points triangulated from the filter poses, then exploits bidirectional dense depth agreement between co-visible images to estimate and correct per-image scale errors while preserving the metric scale established by the anchors. Context keyframes further improve depth prediction, and the resulting submaps are fused in a factor graph. We evaluate a single mapping configuration across five public camera-IMU setups and a new Phone-rig/GoPro dataset. With nothing tuned per dataset/setup and every map aligned only by Accord's own trajectory, Accord achieves consistently best/second-best mean F-score at 5 cm on every platform. Accord is open-source along with the phone-rig dataset for the benefit of the research community

0.23

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.60
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

Gravity-aware partially calibrated absolute pose estimation from affine- or rotation-covariant features

cs.CV ·2026-08-20 ·Marcus Valtonen Örnhag, Alberto Jaenal, Stefan Adalbjörnsson
top venue similarity 0.60
Abstract · European Conference on Computer Vision 2026

Inertial measurement units (IMUs) are now standard in most consumer devices, such as smartphones, drones, and extended reality (XR) headsets. By fusing visual and inertial data, localization systems gain significantly in speed and robustness compared to vision-only or IMU-only approaches. However, traditional pose estimation methods fail to utilize the local geometric information embedded in feature descriptors like SIFT. Recent work has proved the advantages of leveraging this information for relative and absolute pose estimation, but its application to partially calibrated absolute pose estimation remains unexplored. In this paper, we derive novel constraints for joint estimation of absolute pose and focal length, making use of a gravity vector obtained from IMU data and the feature-induced local geometry, which we use to construct two efficient solvers: UP1PfAC, that operates given a single affine correspondence and UP2PfORI, which requires two orientation-covariant features. Unlike traditional, semi-calibrated absolute pose methods requiring four point correspondences, our solvers benefit from fewer samples and lower computational cost, simplifying robust estimation in modern RANSAC-like frameworks. We evaluate the proposed solvers against the state-of-the-art on large-scale public datasets and demonstrate that our method achieves fast and accurate localization and focal length estimation.

0.37

Camera Calibration Using Inaccurate and Asynchronous Discrete GPS Trajectory from Drones

eess.SY cs.CV ·2026-08-27 ·R. Yang, Y. Bar-Shalom, H. A. J. Huang
theory similarity 0.60
Abstract · 11 pages, 12 figs, published on JAIF

This paper considers a stationary camera calibration problem, which estimates the camera orientation angles yaw, pitch and roll, using a drone trajectory recorded by a GPS. There are three challenges in using a GPS trajectory as ground truth for camera calibration. One, the altitude of GPS data is inaccurate with an unknown bias. Two, the GPS receiver and camera are not time synchronized, and there is an unknown time offset between the two systems. Three, the GPS trajectory is time-discrete and accurate interpolation is needed. This is actually an estimation problem since velocity is also needed. To address the first two challenges, we formulate the problem as a parameter estimation problem to estimate a vector consisting of the GPS altitude bias and time offset in addition to the camera yaw, pitch and roll biases. We then develop a special maximum likelihood estimator using the Iterated Least Squares algorithm which can work with a non-synchronized time-discrete GPS trajectory for the third challenge. Since the camera measurement errors are usually small, this requires a high calibration accuracy so that the residual bias error following the calibration should not be significant compared to the measurement error standard deviation. The calibration accuracy depends highly on the drone trajectory. This paper also recommends an appropriate drone trajectory which can yield a good calibration accuracy, namely, 14\% of the measurement error standard deviation. Simulation tests are conducted to demonstrate the algorithm performance. The estimation results meet the Cramer-Rao Lower Bound (CRLB) since the Normalized Estimation Error Squared w.r.t.\ the CRLB is statistically acceptable.

0.18