CS Paper Radar

HeadIO: Body-Frame Heading Decomposition for Neural Inertial Odometry on Head-Mounted Devices

Taeyoung Yeon, Yiquan Li, Chenfeng Gao, Vasco Xu, Karan Ahuja

cs.CV cs.RO ·submitted 2026-11-11 01:33 UTC · v1
benchmark

Abstract

Inertial odometry (IO) using only Inertial Measurement Units (IMUs) enables camera-free head tracking in head-mounted devices such as VR headsets, AR glasses, and earbuds. Prior IO methods operate in a gravity-aligned world frame, which is not yaw-equivariant. Yaw augmentation improves robustness but does not guarantee equivariance; learned equivariant layers achieve it, but EqNIO's full pipeline costs nearly 3$\times$ the FLOPs of ours. While raw body-frame IMU inputs are inherently yaw-invariant, head tilt redistributes both gravity and motion signals across device axes, making the representation tilt-variant. We propose HeadIO, which combines a body-frame heading decomposition with a bidirectional Mamba backbone for head-mounted inertial odometry. Our decomposition achieves tilt invariance by separating gravity-aligned and horizontal components using only the tilt component of device orientation. We evaluate on four head-mounted datasets and find that HeadIO improves RTE-5s by 8.1% (0.260 m $\to$ 0.239 m) over world-frame methods with learned equivariant layers on Nymeria, the largest benchmark dataset, at nearly 3$\times$ lower FLOPs and 8$\times$ fewer parameters. HeadIO achieves state-of-the-art performance on our primary metric, RTE-5s, on all Aria-glasses datasets, which natively provide body-frame semantics for our decomposition method. We further evaluate the IMU-only deployment scenario on Nymeria, where HeadIO remains state-of-the-art. We show that our method relies mainly on tilt accuracy, which can be obtained from the gravity signal; for yaw, a single-coefficient gyroscope correction removes 11.6% of the yaw error and improves RTE-5s by 2.5%, and sparse external yaw corrections (for example, one every 30 s) can improve RTE-5s by 12.0%. Our decomposition is lightweight, composes with any backbone, and is suitable for real-time deployment on head-mounted devices.

Comment
Submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

GINIO: A Geometric SO(3)-Equivariant Interface for Neural Inertial Odometry

cs.RO cs.LG ·2026-09-21 ·Chankyo Kim, Minghan Zhu, Tzu-Yuan Lin, Avantika Rattan, Maani Ghaffari
published similarity 0.72
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026). 28 pages, 14 figures

Neural inertial odometry increasingly uses networks as learned measurements inside filtering pipelines. Such measurements should transform consistently under arbitrary IMU mounting conventions: their mean must transform as a vector, and their covariance must transform congruently as a second-order tensor. We present GINIO, a geometric SO(3)-equivariant interface for neural inertial odometry under arbitrary rotations of the IMU measurement frame. Given calibrated IMU windows, our framework predicts a motion measurement and uncertainty obeying these tensorial laws. To support efficient sensor-frame learning, we introduce Last-Frame Alignment (LFA), a deterministic preprocessing step that is provably equivalent to world-frame training for SO(3)-equivariant predictors. The connected estimator tracks sensor-local states such as IMU bias, separating nuisance estimation from the geometric law enforced by the learned measurement. We instantiate the same interface in filter-connected NIO, AirIO-style recurrent aerial prediction, EqNIO-style full-SO(3) canonicalization, and ResNet-style temporal backbones. On TLIO, GINIO achieves 2.018 m ID/SO(3) ATE while EqNIO degrades to 76.389 m, using 11.6x fewer FLOPs. On NanoBench, our AirIO-style instantiation improves ATE from 5.579 m to 1.430 m without external attitude input, and our ResNet-style instantiation reaches 0.581 m ATE versus 0.645 m for ResNet1D. On Fetch, GINIO empirically reduces unseen physical-remount ATE from 8.15 m to 0.50 m without retraining, demonstrating robustness beyond the exact coordinate-frame guarantee. For uncertainty, spectral covariance reduces covariance-equivariance error by over three orders of magnitude compared with a diagonal head.

0.35

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.64
Abstract · 5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 202…

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

0.63

Gravity-aware partially calibrated absolute pose estimation from affine- or rotation-covariant features

cs.CV ·2026-08-20 ·Marcus Valtonen Örnhag, Alberto Jaenal, Stefan Adalbjörnsson
top venue similarity 0.64
Abstract · European Conference on Computer Vision 2026

Inertial measurement units (IMUs) are now standard in most consumer devices, such as smartphones, drones, and extended reality (XR) headsets. By fusing visual and inertial data, localization systems gain significantly in speed and robustness compared to vision-only or IMU-only approaches. However, traditional pose estimation methods fail to utilize the local geometric information embedded in feature descriptors like SIFT. Recent work has proved the advantages of leveraging this information for relative and absolute pose estimation, but its application to partially calibrated absolute pose estimation remains unexplored. In this paper, we derive novel constraints for joint estimation of absolute pose and focal length, making use of a gravity vector obtained from IMU data and the feature-induced local geometry, which we use to construct two efficient solvers: UP1PfAC, that operates given a single affine correspondence and UP2PfORI, which requires two orientation-covariant features. Unlike traditional, semi-calibrated absolute pose methods requiring four point correspondences, our solvers benefit from fewer samples and lower computational cost, simplifying robust estimation in modern RANSAC-like frameworks. We evaluate the proposed solvers against the state-of-the-art on large-scale public datasets and demonstrate that our method achieves fast and accurate localization and focal length estimation.

0.37

ArmPoser: Real-Time, Calibration-Free Arm Pose Estimation from Smartwatch IMU

cs.CV cs.HC ·2026-09-08 ·Bishnu Dev, Vasco Xu, Xi-Aan Loh, Chenfeng Gao, Henry Hoffmann +1 more
published similarity 0.64
Abstract

Arm pose estimation enables applications in fitness, extended reality input, rehabilitation, and life logging. Prior smartwatch-based approaches rely on calibration poses and preprocessing pipelines that transform raw IMU measurements into standardized training formats. These steps hinder deployment in everyday settings and introduce errors due to imperfect calibration and sensor drift. We present ArmPoser, a calibration-free arm pose estimation system using a single smartwatch IMU. Our central contribution is training models directly in the reference frame native to consumer smartwatches, aligning learning with how IMU data is produced by deployed devices. By operating on device-native axes, ArmPoser removes the need for coordinate transformations, explicit alignment, and bone-offset calibration used in prior work. We further augment training with physically grounded variations in watch placement and arm morphology to account for user-specific variability. ArmPoser also includes a wear-configuration module that infers anterior or posterior forearm placement and crown orientation. We evaluate pose estimation on public benchmarks and on a 10-participant, 30-activity study using watchOS and Android smartwatches, where ArmPoser matches or exceeds calibrated baselines without any user calibration.

0.28

Reduced Order Observers for Monocular Visual Inertial Odometry

eess.SY ·2026-09-22 ·Amel Abi, Mouaad Boughellaba, Miaomiao Wang, Abdelhamid Tayebi
similarity 0.64
Abstract

This work develops a reduced order observer framework of monocular visual-inertial odometry (VIO). The key idea consists in considering the gravity vector in the body-frame as an additional state and constructing an appropriate output that relates the monocular bearing measurements and their time derivatives to the body-frame velocity. This eliminates the need for the estimation of the landmark positions, leading to a six-dimensional linear time-varying (LTV) observer for the body-frame velocity and gravity, endowed with uniform global exponential stability guarantees. These estimates are subsequently used to recover the orientation almost globally, up to an unknown constant yaw offset, and the position up to an unknown constant translation. The mixed-bearing framework is further extended to account for the inertial measurement unit (IMU) biases, yielding a twelve-dimensional LTV observer endowed with local exponential stability guarantees. Numerical simulations are provided to illustrate the effectiveness of the proposed observers.

0.15

Reliability-Gated Fusion of Consumer Head and Foot IMUs for Lower-Body 3D Pose

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.64
Abstract · 10 pages, 4 figures, 3 tables. Code: https://github.com/ZhilinGuo/reliability-gated-imu-fusion

Sparse inertial pose estimation promises camera-free motion capture from consumer devices, but consumer sensors are unreliable: firmware-fused orientations are biased, mounting varies between sessions, and streams drift or drop out. On a new 35-take single-subject benchmark pairing an earbud head inertial measurement unit (IMU) with two smart-insole foot IMUs (SAM-3D-Body pseudo-ground-truth labels), we show the reliability problem is channel-level: a channel ablation isolates foot acceleration as the most informative input (66.6 mm vs. 79.0 mm head-only) and the firmware-fused foot orientation as the liability that destroys the gain. We therefore let the model learn how much to trust each channel of each stream: one temporal gate per stream per channel block, trained with an auxiliary reliability objective on synthetically corrupted pretraining data. The channel-gated model is the most accurate of our learned fusion arms on clean data (69.4 mm vs. 83.7 static, 86.6 ungated) and under every simulated fault (bias in training; drift, dropout eval-only); its gates suppress the natively biased foot-orientation channels on clean real data without test-time supervision and flag dropout bursts at 0.92-0.999 AUROC. Two contrasts: dropping a channel known a priori to fail is flat across foot faults but collapses when an unanticipated stream fails (head dropout: 92.9 vs. 79.3 mm); and a fine-tuned HMD-Poser is more accurate on clean data (64.4 mm) and nominally under drift, with no significant paired difference under bias or dropout, but a larger worst-case degradation from clean (+16.1 vs. +3.5 mm, single seed). Learning to gate reliability instead of sensor count is the lever for deployable sparse inertial capture. Code is available at https://github.com/ZhilinGuo/reliability-gated-imu-fusion.

0.37

Extended Model-Based Learned Inertial Odometry

cs.RO ·2026-11-06 ·Sasanka Kuruppu Arachchige, Joni-Kristian Kämäräinen
publishedcode/data similarity 0.63
Abstract · 8 pages, Published at ICUAS 2026

Inertial odometry is a compelling approach to state estimation for agile quadrotor flight due to its affordability, low weight, and robustness to perceptual degradation. However, relying only on integrated inertial measurements is impractical, as sensor errors and time-varying biases lead to significant pose drift. Although recent advances have enabled inertial odometry for drone racing, existing approaches show limited generalization to trajectories not seen during training. This work improves generalization by adopting a body-frame representation and incorporating body-frame torque dynamics into the learning pipeline. The learned model predicts short-horizon relative displacements, which are fused with IMU measurements in an Extended Kalman Filter. Experimental results show that the proposed method outperforms the previous state-of-the-art learned inertial odometry approach for quadrotor pose estimation on unseen trajectories. An additional evaluation on four public quadrotor datasets, with whole trajectory shapes held out of training, confirms a lower velocity error on every held-out set and shows that the torque input is most informative when it is derived from the rotor signals. Code, data pipeline and trained models are publicly available.

0.48

\textbf{PLATO}: \emph{Preintegration Learning from Accurate Trajectory Observations} for Neural Inertial Odometry

cs.RO eess.SY ·2026-09-06 ·Haoying Li, Qihang Liu, Yifan Peng, Keyan Miao, Junfeng Wu
similarity 0.63
Abstract

Neural inertial odometry has demonstrated strong potential for motion estimation in challenging environments, yet inertial-only preintegration remains sensitive to IMU bias and uncertainty. To this end, this paper introduces \textbf{PLATO}:~\emph{Preintegration Learning from Accurate Trajectory Observations}, a likelihood-based framework that leverages accurate trajectory observations to jointly learn IMU bias dynamics modeled by a neural ordinary differential equation~(NODE) and gyroscope and accelerometer noise covariances. Optimization exploits the sparse structure of the negative log-likelihood, with IMU noise-parameter gradients computed by forward differentiation. A tailored double-adjoint scheme couples a discrete invariant-error adjoint with a continuous-time adjoint for the bias NODE, enabling memory-efficient likelihood optimization over the nested bias-dynamics and IMU-preintegration rollouts. Validation on EuRoC shows improved performance, and underwater robot experiments demonstrate applicability under intermittent lighting failures and visual degradation.

0.20