CS Paper Radar

Extended Model-Based Learned Inertial Odometry

Sasanka Kuruppu Arachchige, Joni-Kristian Kämäräinen

cs.RO ·submitted 2026-11-06 15:19 UTC · v1
publishedcode/data

Abstract

Inertial odometry is a compelling approach to state estimation for agile quadrotor flight due to its affordability, low weight, and robustness to perceptual degradation. However, relying only on integrated inertial measurements is impractical, as sensor errors and time-varying biases lead to significant pose drift. Although recent advances have enabled inertial odometry for drone racing, existing approaches show limited generalization to trajectories not seen during training. This work improves generalization by adopting a body-frame representation and incorporating body-frame torque dynamics into the learning pipeline. The learned model predicts short-horizon relative displacements, which are fused with IMU measurements in an Extended Kalman Filter. Experimental results show that the proposed method outperforms the previous state-of-the-art learned inertial odometry approach for quadrotor pose estimation on unseen trajectories. An additional evaluation on four public quadrotor datasets, with whole trajectory shapes held out of training, confirms a lower velocity error on every held-out set and shows that the torque input is most informative when it is derived from the rotor signals. Code, data pipeline and trained models are publicly available.

Comment
8 pages, Published at ICUAS 2026
Journal ref
ICUAS 2026
DOI
10.1109/ICUAS69441.2026.11598619

Closest papers

Nearest neighbours by meaning across the whole index.

LBDU-VIO: Learned Bias Dynamics and Uncertainty for Visual-Inertial Odometry with Unreliable Vision

cs.RO ·2026-09-30 ·Qizhi Guo, Junning Lyu, Defu Lin, Shaoming He
similarity 0.72
Abstract · 12 pages, 8 figures

Visual-inertial odometry (VIO) for aerial robots relies on high rate inertial measurement unit (IMU) propagation between visual updates. However, conventional multi state constraint Kalman filters (MSCKFs) use random walk bias assumptions and fixed noise parameters, which can limit robustness when visual information is unreliable. To address this problem, we propose LBDU-VIO, a learning-augmented MSCKF with learned continuous time bias dynamics and an IMU uncertainty model. A neural ordinary differential equation (ODE) models continuous time bias dynamics to propagate the filter's bias states, replacing their random walk model. The IMU uncertainty model predicts motion adaptive measurement noise covariances for covariance propagation. Both models are trained with pose supervision without direct labels. Experiments on real world EuRoC and TUM-VI benchmarks show lower errors than representative visual-inertial baselines, including a 25.1% reduction in mean relative position error compared with S-MSCKF on EuRoC sequences with 10s visual outage.

0.12

VeloBins: Learning Velocity and Its Uncertainty via Bins and Error-Conditioned Gaussian Labels for Aerial Inertial Odometry

cs.RO ·2026-08-30 ·Maulana Bisyir Azhari, Seungwook Lee, Donghun Han, Sung Jun Park, David Hyunchul Shim
similarity 0.69
Abstract · 8 pages, 6 figures, 4 tables. Supplementary video: https://youtu.be/QkZY0So3myw

Inertial odometry (IO) is critical for aerial robots, where aggressive maneuvers and poor lighting degrade visual sensors. Recent learning-based IO methods improve traditional integration-based approaches by learning motion priors from IMU and platform-specific sensors, then fusing the predictions within an extended Kalman filter. However, learning velocity through regression is difficult, while jointly estimating uncertainty with a separate decoder and negative log-likelihood (NLL) loss further complicates training and can lead to over-confident estimates. We introduce VeloBins, which reformulates velocity regression as classification over discretized velocity bins. We decode both the velocity from the bin distribution's expectation and the uncertainty from its variance, removing the need for a separate uncertainty decoder. We further supervise the uncertainty explicitly using an error-conditioned Gaussian label centered at the ground-truth velocity, with a standard deviation set to the velocity error. We evaluate VeloBins on four aerial datasets, ranging from free-form aggressive flights and a 27 g nano-quadrotor to drone racing at over 21~m/s. VeloBins achieves the lowest average errors on all four datasets, reducing velocity, relative trajectory, and absolute trajectory errors by 3-27%, 8-40%, and 6-53%, respectively, compared with the strongest baseline. Notably, the proposed supervision achieves the lowest NLL and best filter consistency despite never optimizing an NLL loss. The code will be available upon acceptance.

0.33

SSIO: Self-Supervised Inertial Odometry

cs.RO ·2026-10-19 ·Yuheng Qiu, Yutian Chen, Carlton Cort, Weison Huang, Shibo Zhao +8 more
similarity 0.69
Abstract

Learning inertial odometry for a new platform usually requires ground-truth trajectories. We show that an inertial odometry model can instead be trained from scratch by a myopic teacher that integrates the IMU over each short window independently, a scheme we call integration self-supervision. Interestingly, although supervised only by short-window velocity changes, the student learns to directly predict velocity, and does so more accurately than its integration teacher. Pose graph distillation then refines the model with sequence-consistent targets from a pose graph over many windows. Training on a new platform therefore no longer requires collecting ground-truth trajectories, but only calibrating the IMU and recording data during normal operation. Across six datasets spanning pedestrians, drones, quadrupeds, and a humanoid, the same recipe with no velocity or position labels trains models that come within 0.07~m/s average velocity error of a same-architecture supervised baseline.

0.25

Concurrent Learning-Based Inertial Parameter Estimation and Control of Quadrotors

eess.SY cs.RO ·2026-11-08 ·Sandesh Thapa, He Bai
theory similarity 0.68
Abstract · 6 pages, 4 figures. To be submitted to IEEE Control Systems Letters (L-CSS) with the CDC 2027 option

In this letter, we consider trajectory tracking control and inertial parameter estimation of a quadrotor UAV whose center of mass (CoM) does not coincide with its geometric center. Onboard payloads like an IMU, a camera, or a battery are not necessarily placed at its geometric center. Moreover, during the flight these sensors might move because of external disturbances and cause a CoM offset. Thus, these events and equipment introduce an offset and cause the inertia matrix to be non-diagonal. We develop an integral concurrent learning (ICL)-based geometric controller that estimates the mass, the CoM offset, and the full inertia matrix online, without an accelerometer or numerical derivatives, and tracks a given trajectory corrected by the offset estimated online. We prove that the estimated parameters converge to their true values under a finite excitation condition. We validate the effectiveness of the proposed algorithm using a simulation example.

0.16

When Do Learned Priors Help Visual Inertial Estimation? A Controlled Study of Prior Integration, Calibration, Initialization, and Backend Consistency

cs.RO cs.CV ·2026-09-12 ·Jinchang Zhang, Guoyu Lu
similarity 0.67
Abstract

Learned components are increasingly integrated into geometric visual--inertial estimators to provide motion, depth, bias, uncertainty, or confidence cues. Yet it remains unclear whether gains arise from useful learned priors or from changes in the backend, calibration, initialization, temporal association, or evaluation gauge. We present a controlled framework for learning-augmented visual--inertial estimation that separates fusion gain from the incremental value of a learned prior and evaluates four evidence layers: local motion consistency, global trajectory accuracy, physical-state correctness, and numerical consistency. We instantiate the framework with a MonoViT-based monocular motion prior added as a local relative-motion factor to an unchanged VINS backend. We compare Original VINS and learned-prior VINS under matched sensor streams, timestamps, initialization, frontend/backend settings, and camera--IMU extrinsics, while probing calibration, initialization, state coupling, scale, bundle adjustment, and loop closure. On KITTI, with fixed reference extrinsics, translation APE RMSE is 31.4 m for Original VINS and 31.8 m with the learned prior. Across four recordings, the prior changes mean APE by only -0.2%, while a five-times-higher weight worsens it by 8.2%. Online extrinsic updates increase mean APE by 45.7% and 52.1%, respectively, while mean RPE changes by less than 2%. These results show that fusion performance alone cannot establish the value of learned priors. Reliable evaluation requires same-backend controls and joint analysis of prior compatibility, calibration, initialization, global drift, physical-state error, and backend consistency.

0.20

GINIO: A Geometric SO(3)-Equivariant Interface for Neural Inertial Odometry

cs.RO cs.LG ·2026-09-21 ·Chankyo Kim, Minghan Zhu, Tzu-Yuan Lin, Avantika Rattan, Maani Ghaffari
published similarity 0.67
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026). 28 pages, 14 figures

Neural inertial odometry increasingly uses networks as learned measurements inside filtering pipelines. Such measurements should transform consistently under arbitrary IMU mounting conventions: their mean must transform as a vector, and their covariance must transform congruently as a second-order tensor. We present GINIO, a geometric SO(3)-equivariant interface for neural inertial odometry under arbitrary rotations of the IMU measurement frame. Given calibrated IMU windows, our framework predicts a motion measurement and uncertainty obeying these tensorial laws. To support efficient sensor-frame learning, we introduce Last-Frame Alignment (LFA), a deterministic preprocessing step that is provably equivalent to world-frame training for SO(3)-equivariant predictors. The connected estimator tracks sensor-local states such as IMU bias, separating nuisance estimation from the geometric law enforced by the learned measurement. We instantiate the same interface in filter-connected NIO, AirIO-style recurrent aerial prediction, EqNIO-style full-SO(3) canonicalization, and ResNet-style temporal backbones. On TLIO, GINIO achieves 2.018 m ID/SO(3) ATE while EqNIO degrades to 76.389 m, using 11.6x fewer FLOPs. On NanoBench, our AirIO-style instantiation improves ATE from 5.579 m to 1.430 m without external attitude input, and our ResNet-style instantiation reaches 0.581 m ATE versus 0.645 m for ResNet1D. On Fetch, GINIO empirically reduces unseen physical-remount ATE from 8.15 m to 0.50 m without retraining, demonstrating robustness beyond the exact coordinate-frame guarantee. For uncertainty, spectral covariance reduces covariance-equivariance error by over three orders of magnitude compared with a diagonal head.

0.35

SUPER ODOMETRY 2.0: Resilient Odometry via Hierarchical Adaptation

cs.RO ·2026-08-26 ·Shibo Zhao, Sifan Zhou, Yuchen Zhang, Ji Zhang, Chen Wang +2 more
publishedhighly cited similarity 0.66
Abstract

Resilient and robust odometry is crucial for autonomous systems operating in complex and dynamic environments. Existing odometry systems often struggle with severe sensory degradations and extreme conditions such as smoke, sandstorms, snow, or low-light conditions, threatening both the safety and functionality of robots. To address these challenges, we present Super Odometry, a sensor fusion framework that dynamically adapts to varying levels of environmental degradation. Super Odometry employs a hierarchical structure to integrate four core modules from lower-level to higher-level adaptability including adaptive feature selection, adaptive state direction selection, adaptive engine selection, and a novel learning- based inertial odometry. The inertial odometry, trained on over 100 hours of heterogeneous robotic platforms, captures comprehensive motion dynamics. Super Odometry elevates the inertial measurement unit (IMU) to equal importance with camera and LiDAR within the sensor fusion framework, providing a reliable fallback when exteroceptive sensors fail. Super Odometry has been validated across 200 kilometers and 800 operational hours on a fleet of aerial, wheeled, and legged robots, under diverse sensor configurations, environmental degradation, and aggressive motion profiles. It marks an important step towards safe and long-term robotic autonomy in all-degraded environments.

0.69

Towards Agile Vision-Based Multi-UAV Flight: Revisiting State Estimation

cs.RO ·2026-09-30 ·Michal Pliska, Matouš Vrba, Ondřej Víta, Martin Jiroušek, Viktor Walter +1 more
publishedbenchmark similarity 0.66
Abstract · This work has been accepted to the IEEE for possible publication (IROS 2026)

Agile multi-UAV flight requires accurate and low-latency onboard estimation of the kinematic states of neighboring UAVs for collision avoidance, motion coordination, etc. Most vision-based approaches rely on position-only measurements, inferring velocity and acceleration indirectly from displacement. We show that this introduces a fixed structural delay in the estimation of higher-order states, which limits the achievable agility. To address this, we propose to integrate tilt measurements, provided by a state-of-the-art visual detector, which inform about the thrust direction of co-planar multirotor UAVs. We benchmark four position-only and five pose-aware estimators, including a novel formulation of a linear thrust-constraining Kalman filter, on two real-world and one high-fidelity photorealistic simulated dataset over different levels of agility (3-21 m/s^2). In our setup, pose-aware estimation consistently reduces the average velocity and acceleration estimation errors by 40% and 57% across the three datasets with the proposed KF formulation outperforming the other estimators. Position-only filters exhibit a constant ~300 ms delay in acceleration step response independent of agility, whereas the tilt-constrained estimators operate near the physical response limit given by the camera frame-rate by observing the change in thrust direction before the displacement accumulates. In a closed-loop leader-follower simulated experiment with NMPC control, position-only estimation of the leader's state fails to facilitate stable hovering of the follower, while the proposed estimator enables tracking of lateral maneuvers exceeding 2g of acceleration.

0.26