CS Paper Radar

SUPER ODOMETRY 2.0: Resilient Odometry via Hierarchical Adaptation

Shibo Zhao, Sifan Zhou, Yuchen Zhang, Ji Zhang, Chen Wang, Wenshan Wang, Sebastian Scherer

cs.RO ·submitted 2026-08-26 06:34 UTC · v1
publishedhighly cited

Abstract

Resilient and robust odometry is crucial for autonomous systems operating in complex and dynamic environments. Existing odometry systems often struggle with severe sensory degradations and extreme conditions such as smoke, sandstorms, snow, or low-light conditions, threatening both the safety and functionality of robots. To address these challenges, we present Super Odometry, a sensor fusion framework that dynamically adapts to varying levels of environmental degradation. Super Odometry employs a hierarchical structure to integrate four core modules from lower-level to higher-level adaptability including adaptive feature selection, adaptive state direction selection, adaptive engine selection, and a novel learning- based inertial odometry. The inertial odometry, trained on over 100 hours of heterogeneous robotic platforms, captures comprehensive motion dynamics. Super Odometry elevates the inertial measurement unit (IMU) to equal importance with camera and LiDAR within the sensor fusion framework, providing a reliable fallback when exteroceptive sensors fail. Super Odometry has been validated across 200 kilometers and 800 operational hours on a fleet of aerial, wheeled, and legged robots, under diverse sensor configurations, environmental degradation, and aggressive motion profiles. It marks an important step towards safe and long-term robotic autonomy in all-degraded environments.

Journal ref
Science Robotics 2025
DOI
10.1126/scirobotics.adv1818

Closest papers

Nearest neighbours by meaning across the whole index.

When LiDAR Fades, Radar Takes Over: LiDAR Reliability-Aware Adaptive Localization Under Airborne Obscurants

cs.RO ·2026-10-09 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulo
similarity 0.68
Abstract

LiDAR-inertial odometry (LIO) is widely used for real-time localization and mapping, but its reliability can degrade substantially in subterranean environments affected by smoke, dust, and other airborne obscurants, whereas radar remains comparatively robust. This article presents a one-class temporal learning framework for LiDAR degradation detection and reliability-aware localization under such conditions. A broad set of degradation-sensitive cues, including spatial, cross-modal, geometric/motion, intensity, and measurement-recency features, is evaluated to characterize changes in LiDAR sensing quality. Their temporal evolution is modelled over sliding windows using an LSTM autoencoder trained exclusively on nominal operation, enabling deviations from healthy sensor behaviour to be detected without requiring labelled degradation data. The resulting LiDAR reliability estimate governs adaptive selection between LIO and radar inertial odometry (RIO), retaining LIO during reliable sensing and transferring localization authority to RIO when degradation is detected. The framework is evaluated using real-world ground robot data collected in GNSS-denied subterranean tunnels under nominal and dense-smoke conditions. Experimental results demonstrate degradation detection, adaptive modality switching, and continued localization output under severe LiDAR degradation. A feature family ablation study further shows that a reduced feature representation can improve degradation-aware localization performance in the evaluated dense-smoke scenarios, highlighting the importance of feature parsimony in one-class sensor degradation detection. The code will be released as open source to support reproducibility and further research.

0.19

AnyVIO: Feed-Forward Streaming Visual-Inertial Odometry Across Platforms

eess.IV ·2026-11-19 ·Omoruyi Atekha, Marcus Greiff, Ray Zhang, Luca Carlone
similarity 0.67
Abstract · 11 pages

Geometric foundation models (GFMs) estimate camera mo- tion and scene structure from images without requiring ex- pert parameter tuning, but either lack metric scale or rely on learned priors to infer scale, which is unobservable from monocular images alone. Inertial sensing offers a way to observe metric scale, but existing methods add inertial in- formation through a filter or factor graph, which reintro- duces bespoke parameter tuning and optimization costs that can grow with the trajectory. To bridge this gap, we present AnyVIO, a real-time, feed-forward streaming model for monocular visual-inertial odometry (VIO), which combines a streaming GFM with an inertial foundation model (IFM). Both the GFM and IFM predict the metric motion between consecutive frames, and a lightweight learned fusion head quantifies the reliability of each estimate and blends them in a single forward pass. Across nine datasets recorded from cars, legged and ground robots, and handheld and head- mounted devices, AnyVIO reduces the metric position error of its visual model by 36% while publishing each pose esti- mate 70 ms after an image is received. We further deploy AnyVIO onboard two real vehicles at up to 140 km/h, where it remains accurate in poor lighting and heavy dust.

0.20

\textbf{PLATO}: \emph{Preintegration Learning from Accurate Trajectory Observations} for Neural Inertial Odometry

cs.RO eess.SY ·2026-09-06 ·Haoying Li, Qihang Liu, Yifan Peng, Keyan Miao, Junfeng Wu
similarity 0.67
Abstract

Neural inertial odometry has demonstrated strong potential for motion estimation in challenging environments, yet inertial-only preintegration remains sensitive to IMU bias and uncertainty. To this end, this paper introduces \textbf{PLATO}:~\emph{Preintegration Learning from Accurate Trajectory Observations}, a likelihood-based framework that leverages accurate trajectory observations to jointly learn IMU bias dynamics modeled by a neural ordinary differential equation~(NODE) and gyroscope and accelerometer noise covariances. Optimization exploits the sparse structure of the negative log-likelihood, with IMU noise-parameter gradients computed by forward differentiation. A tailored double-adjoint scheme couples a discrete invariant-error adjoint with a continuous-time adjoint for the bias NODE, enabling memory-efficient likelihood optimization over the nested bias-dynamics and IMU-preintegration rollouts. Validation on EuRoC shows improved performance, and underwater robot experiments demonstrate applicability under intermittent lighting failures and visual degradation.

0.20

Extended Model-Based Learned Inertial Odometry

cs.RO ·2026-11-06 ·Sasanka Kuruppu Arachchige, Joni-Kristian Kämäräinen
publishedcode/data similarity 0.66
Abstract · 8 pages, Published at ICUAS 2026

Inertial odometry is a compelling approach to state estimation for agile quadrotor flight due to its affordability, low weight, and robustness to perceptual degradation. However, relying only on integrated inertial measurements is impractical, as sensor errors and time-varying biases lead to significant pose drift. Although recent advances have enabled inertial odometry for drone racing, existing approaches show limited generalization to trajectories not seen during training. This work improves generalization by adopting a body-frame representation and incorporating body-frame torque dynamics into the learning pipeline. The learned model predicts short-horizon relative displacements, which are fused with IMU measurements in an Extended Kalman Filter. Experimental results show that the proposed method outperforms the previous state-of-the-art learned inertial odometry approach for quadrotor pose estimation on unseen trajectories. An additional evaluation on four public quadrotor datasets, with whole trajectory shapes held out of training, confirms a lower velocity error on every held-out set and shows that the torque input is most informative when it is derived from the rotor signals. Code, data pipeline and trained models are publicly available.

0.48

Learning Wheel Motion Uncertainty for Degeneracy-Aware LiDAR-Inertial Odometry on Quadrupedal Wheel-Legged Robots

cs.RO ·2026-10-19 ·Hairuo Wei, Yunfan Ren, Renda Yang, Qiangsheng Huang, Zhongyu Li
similarity 0.66
Abstract

Wheel kinematics can support odometry for quadrupedal wheel-legged robots when LiDAR geometry provides weak motion constraints. However, slip and contact loss make rolling predictions unreliable, and contact state alone cannot determine their reliability across motion directions. We propose a tightly coupled LiDAR-inertial-kinematic odometry framework that retains analytical rolling predictions and learns per-wheel, direction-dependent process covariances from proprioceptive history. The estimator maintains moving wheel-center states, allowing the learned uncertainty to regulate the influence of rolling predictions through forward-kinematic corrections. Degeneracy-aware projection (DAP) complements this mechanism by suppressing LiDAR constraints along geometrically weak directions. The learned covariance network (CovNet) is trained through a differentiable filter using simulated velocity supervision and deployed on the real robot without fine-tuning. On the six room sequences with the highest degeneracy ratios in our indoor dataset, the method reduces mean per-sequence position root mean square error (RMSE) by 66.2% relative to FAST-LIO2 and by 31.0% relative to a fixed-covariance variant. In a severely degenerate corridor run, it achieves an endpoint position error of 0.198 m, compared with 7.531 m for FAST-LIO2. These results demonstrate robust odometry under challenging geometric and wheel-motion conditions. We plan to publicly release our code and multimodal dataset. Project website: https://weihairuo.github.io/wheel-motion-uncertainty/

0.29

LBDU-VIO: Learned Bias Dynamics and Uncertainty for Visual-Inertial Odometry with Unreliable Vision

cs.RO ·2026-09-30 ·Qizhi Guo, Junning Lyu, Defu Lin, Shaoming He
similarity 0.66
Abstract · 12 pages, 8 figures

Visual-inertial odometry (VIO) for aerial robots relies on high rate inertial measurement unit (IMU) propagation between visual updates. However, conventional multi state constraint Kalman filters (MSCKFs) use random walk bias assumptions and fixed noise parameters, which can limit robustness when visual information is unreliable. To address this problem, we propose LBDU-VIO, a learning-augmented MSCKF with learned continuous time bias dynamics and an IMU uncertainty model. A neural ordinary differential equation (ODE) models continuous time bias dynamics to propagate the filter's bias states, replacing their random walk model. The IMU uncertainty model predicts motion adaptive measurement noise covariances for covariance propagation. Both models are trained with pose supervision without direct labels. Experiments on real world EuRoC and TUM-VI benchmarks show lower errors than representative visual-inertial baselines, including a 25.1% reduction in mean relative position error compared with S-MSCKF on EuRoC sequences with 10s visual outage.

0.12

One year in a forest: Analyzing the challenges of autonomous navigation in subarctic environments

cs.RO ·2026-08-27 ·Matěj Boxan, Nicolas Lauzon, Veronica Vannini, Mathis Turgeon-Roy, François Pomerleau
hot direction similarity 0.65
Abstract

Subarctic regions have the potential to see increased deployment of autonomous robots in applications including forestry, mining, and environmental monitoring. In these conditions, an autonomous system's reliance on GNSS or cloud computing is precarious due to dense tree canopies and atmospheric attenuation, necessitating onboard sensing and data processing. However, established exteroceptive modalities, including cameras, lidars, and radars, are typically evaluated in structured urban settings or in environments that lack significant seasonal variations. To address this, we present a field report on a year-long deployment of a mobile robot in a subarctic boreal forest. We evaluate 64 km of data using nine odometry, localization, and mapping methods and assess their performance across seasonal changes. The performed experiments suggest that the environment changes significantly hinder the performance of state-of-the-art techniques, which show increased fragility when subject to conditions characterized by self-similar scenes or tall snowbanks. Additionally, complex Simultaneous Localization and Mapping (SLAM) algorithms offer limited accuracy gains over a proprioceptive baseline while significantly increasing system fragility. Furthermore, by correlating the position drift with features and confidence weight distribution, we show that visual-based SLAM methods are particularly affected by the seasonal changes. Additionally, we investigate the task of cross-season localization in a prior map. While lidar-based methods successfully completed localization runs between seasons, radar and visual methods are prone to failure due to a few matching features between runs, even within the same season. Finally, we detail the challenges and lessons learned from this year-long trial, including a multi-season Teach and Repeat (T&R) evaluation using both radar and lidar-based pipelines.

0.49

VeloBins: Learning Velocity and Its Uncertainty via Bins and Error-Conditioned Gaussian Labels for Aerial Inertial Odometry

cs.RO ·2026-08-30 ·Maulana Bisyir Azhari, Seungwook Lee, Donghun Han, Sung Jun Park, David Hyunchul Shim
similarity 0.65
Abstract · 8 pages, 6 figures, 4 tables. Supplementary video: https://youtu.be/QkZY0So3myw

Inertial odometry (IO) is critical for aerial robots, where aggressive maneuvers and poor lighting degrade visual sensors. Recent learning-based IO methods improve traditional integration-based approaches by learning motion priors from IMU and platform-specific sensors, then fusing the predictions within an extended Kalman filter. However, learning velocity through regression is difficult, while jointly estimating uncertainty with a separate decoder and negative log-likelihood (NLL) loss further complicates training and can lead to over-confident estimates. We introduce VeloBins, which reformulates velocity regression as classification over discretized velocity bins. We decode both the velocity from the bin distribution's expectation and the uncertainty from its variance, removing the need for a separate uncertainty decoder. We further supervise the uncertainty explicitly using an error-conditioned Gaussian label centered at the ground-truth velocity, with a standard deviation set to the velocity error. We evaluate VeloBins on four aerial datasets, ranging from free-form aggressive flights and a 27 g nano-quadrotor to drone racing at over 21~m/s. VeloBins achieves the lowest average errors on all four datasets, reducing velocity, relative trajectory, and absolute trajectory errors by 3-27%, 8-40%, and 6-53%, respectively, compared with the strongest baseline. Notably, the proposed supervision achieves the lowest NLL and best filter consistency despite never optimizing an NLL loss. The code will be available upon acceptance.

0.33