CS Paper Radar

Learning Wheel Motion Uncertainty for Degeneracy-Aware LiDAR-Inertial Odometry on Quadrupedal Wheel-Legged Robots

Hairuo Wei, Yunfan Ren, Renda Yang, Qiangsheng Huang, Zhongyu Li

cs.RO ·submitted 2026-10-19 15:12 UTC · v1

Abstract

Wheel kinematics can support odometry for quadrupedal wheel-legged robots when LiDAR geometry provides weak motion constraints. However, slip and contact loss make rolling predictions unreliable, and contact state alone cannot determine their reliability across motion directions. We propose a tightly coupled LiDAR-inertial-kinematic odometry framework that retains analytical rolling predictions and learns per-wheel, direction-dependent process covariances from proprioceptive history. The estimator maintains moving wheel-center states, allowing the learned uncertainty to regulate the influence of rolling predictions through forward-kinematic corrections. Degeneracy-aware projection (DAP) complements this mechanism by suppressing LiDAR constraints along geometrically weak directions. The learned covariance network (CovNet) is trained through a differentiable filter using simulated velocity supervision and deployed on the real robot without fine-tuning. On the six room sequences with the highest degeneracy ratios in our indoor dataset, the method reduces mean per-sequence position root mean square error (RMSE) by 66.2% relative to FAST-LIO2 and by 31.0% relative to a fixed-covariance variant. In a severely degenerate corridor run, it achieves an endpoint position error of 0.198 m, compared with 7.531 m for FAST-LIO2. These results demonstrate robust odometry under challenging geometric and wheel-motion conditions. We plan to publicly release our code and multimodal dataset. Project website: https://weihairuo.github.io/wheel-motion-uncertainty/

Closest papers

Nearest neighbours by meaning across the whole index.

ToF-Wheel Odometry: Navigating Degeneration of Localization With Limited Sensing Capabilities

cs.RO cs.CV ·2026-10-10 ·Xu Yang, Wenhao Li, Zhengyu Wei, Zening Li, Longxiang Huang +1 more
top venue similarity 0.72
Abstract · 9 pages, 4 figures, 5 tables. Accepted by IEEE Robotics and Automation Letters (RA-L)

Wheel odometry provides an efficient motion prior for ground robots but is prone to transient violations such as wheel slip or terrain-induced tilt. In filtering-based odometry, these violations frequently trigger divergence when they coincide with constrained geometric observability (e.g., featureless corridors). We address this challenge by proposing ToF-Wheel Odometry (TWO), a tightly-coupled filtering framework that integrates wheel kinematics with geometric constraints from Time-of-Flight (ToF) cameras. The primary contribution of this work is a degeneracy-aware, directional covariance-shaping strategy that replaces heuristic online covariance tuning with geometry-conditioned inflation. The core idea is to infer process noise from geometric corrections with a strict reliability check. We decompose the posterior-to-prior correction into a wheel-explainable subspace and an orthogonal remainder. The process covariance is anisotropically adjusted according to the observability of the ToF update: if the geometry is degenerate in non-kinematic directions, the remainder is suppressed as sensor noise; if the geometry is distinct, it is admitted as a valid kinematic violation. Additionally, we introduce an intra-frame feedback loop that retrospectively repairs the process covariance within the current frame to reduce structural lag during bursty disturbances. Extensive experiments on challenging scenarios demonstrate that TWO improves trajectory accuracy and robustness compared to static and adaptive Gaussian filtering, robustly navigating the trade-off between kinematic reliability and limited sensing capabilities.

0.35

SUPER ODOMETRY 2.0: Resilient Odometry via Hierarchical Adaptation

cs.RO ·2026-08-26 ·Shibo Zhao, Sifan Zhou, Yuchen Zhang, Ji Zhang, Chen Wang +2 more
publishedhighly cited similarity 0.66
Abstract

Resilient and robust odometry is crucial for autonomous systems operating in complex and dynamic environments. Existing odometry systems often struggle with severe sensory degradations and extreme conditions such as smoke, sandstorms, snow, or low-light conditions, threatening both the safety and functionality of robots. To address these challenges, we present Super Odometry, a sensor fusion framework that dynamically adapts to varying levels of environmental degradation. Super Odometry employs a hierarchical structure to integrate four core modules from lower-level to higher-level adaptability including adaptive feature selection, adaptive state direction selection, adaptive engine selection, and a novel learning- based inertial odometry. The inertial odometry, trained on over 100 hours of heterogeneous robotic platforms, captures comprehensive motion dynamics. Super Odometry elevates the inertial measurement unit (IMU) to equal importance with camera and LiDAR within the sensor fusion framework, providing a reliable fallback when exteroceptive sensors fail. Super Odometry has been validated across 200 kilometers and 800 operational hours on a fleet of aerial, wheeled, and legged robots, under diverse sensor configurations, environmental degradation, and aggressive motion profiles. It marks an important step towards safe and long-term robotic autonomy in all-degraded environments.

0.69

DCLP++: Learning to Navigate with Footprint Clearance and Relative Motion

cs.RO ·2026-09-08 ·Shanze Wang, Wei Zhang
hot direction similarity 0.66
Abstract · 5 pages

We present DCLP++, a local navigation frameworkthat uses footprint clearance as the geometric basis for studying relative motion features in dynamic environments. Each valid LiDAR return is mapped to its shortest Euclidean distance from the filled robot footprint before reciprocal encoding, replacing distance from the sensor with distance to the occupied body. Radial measurementsor simulated planar relative velocities provide short-horizon features without static-dynamic labels in the policy input. A preliminary study uses a rectangular robot with a speed limit of 1 m/s among 20 moving obstacles. On 100 fixed validation tasks, two selected training seeds yield mean success rates of 42% with sensor rangeand 70% with footprint clearance after 200,000 environment steps.Motion variants show mixed additional gains. These results supportthe clearance-based observation in the evaluated setting; reliable motion benefits and transfer across robots require further evaluation.

0.52

LBDU-VIO: Learned Bias Dynamics and Uncertainty for Visual-Inertial Odometry with Unreliable Vision

cs.RO ·2026-09-30 ·Qizhi Guo, Junning Lyu, Defu Lin, Shaoming He
similarity 0.65
Abstract · 12 pages, 8 figures

Visual-inertial odometry (VIO) for aerial robots relies on high rate inertial measurement unit (IMU) propagation between visual updates. However, conventional multi state constraint Kalman filters (MSCKFs) use random walk bias assumptions and fixed noise parameters, which can limit robustness when visual information is unreliable. To address this problem, we propose LBDU-VIO, a learning-augmented MSCKF with learned continuous time bias dynamics and an IMU uncertainty model. A neural ordinary differential equation (ODE) models continuous time bias dynamics to propagate the filter's bias states, replacing their random walk model. The IMU uncertainty model predicts motion adaptive measurement noise covariances for covariance propagation. Both models are trained with pose supervision without direct labels. Experiments on real world EuRoC and TUM-VI benchmarks show lower errors than representative visual-inertial baselines, including a 25.1% reduction in mean relative position error compared with S-MSCKF on EuRoC sequences with 10s visual outage.

0.12

Extended Model-Based Learned Inertial Odometry

cs.RO ·2026-11-06 ·Sasanka Kuruppu Arachchige, Joni-Kristian Kämäräinen
publishedcode/data similarity 0.65
Abstract · 8 pages, Published at ICUAS 2026

Inertial odometry is a compelling approach to state estimation for agile quadrotor flight due to its affordability, low weight, and robustness to perceptual degradation. However, relying only on integrated inertial measurements is impractical, as sensor errors and time-varying biases lead to significant pose drift. Although recent advances have enabled inertial odometry for drone racing, existing approaches show limited generalization to trajectories not seen during training. This work improves generalization by adopting a body-frame representation and incorporating body-frame torque dynamics into the learning pipeline. The learned model predicts short-horizon relative displacements, which are fused with IMU measurements in an Extended Kalman Filter. Experimental results show that the proposed method outperforms the previous state-of-the-art learned inertial odometry approach for quadrotor pose estimation on unseen trajectories. An additional evaluation on four public quadrotor datasets, with whole trajectory shapes held out of training, confirms a lower velocity error on every held-out set and shows that the torque input is most informative when it is derived from the rotor signals. Code, data pipeline and trained models are publicly available.

0.48

Learning Interaction-Aware Path Corrections from Unlabeled Trajectories: A LiDAR-Based Sim-to-Real GNN Framework for Construction Robots

cs.RO ·2026-10-25 ·Yilong Chen, Yong K. Cho
similarity 0.65
Abstract · 12 pages, 8 figures, submitted to Automation in Construction

Construction robots operating near workers require navigation that can anticipate human motion while remaining robust to dynamic and unstructured site conditions. However, existing social navigation methods depend on hand-crafted interaction rules, labeled demonstrations, or robot-specific control policies, limiting their scalability and transferability in construction environments. We propose a real-time, LiDAR-only framework that learns interaction-aware path corrections from unlabeled demonstrations. Constant-velocity extrapolation generates residual learning targets, while a GNN models relationships among the robot, pedestrians, and goal context. During deployment, an extended Kalman filter tracks LiDAR detections to construct dynamic graphs, and the GNN offsets planner-generated waypoints through a planner-agnostic interface. Within the bricklaying trial, the GNN reduced path irregularity by 39.2\% and increased minimum TTC. Across Dynablox sequences, it increased minimum TTC by 38.3\% while producing shorter, smoother paths than the baselines. Ablation studies supported a 1.0-s prediction interval and confirmed the benefits of target context, reflection augmentation, and feature normalization.

0.22

\textbf{PLATO}: \emph{Preintegration Learning from Accurate Trajectory Observations} for Neural Inertial Odometry

cs.RO eess.SY ·2026-09-06 ·Haoying Li, Qihang Liu, Yifan Peng, Keyan Miao, Junfeng Wu
similarity 0.64
Abstract

Neural inertial odometry has demonstrated strong potential for motion estimation in challenging environments, yet inertial-only preintegration remains sensitive to IMU bias and uncertainty. To this end, this paper introduces \textbf{PLATO}:~\emph{Preintegration Learning from Accurate Trajectory Observations}, a likelihood-based framework that leverages accurate trajectory observations to jointly learn IMU bias dynamics modeled by a neural ordinary differential equation~(NODE) and gyroscope and accelerometer noise covariances. Optimization exploits the sparse structure of the negative log-likelihood, with IMU noise-parameter gradients computed by forward differentiation. A tailored double-adjoint scheme couples a discrete invariant-error adjoint with a continuous-time adjoint for the bias NODE, enabling memory-efficient likelihood optimization over the nested bias-dynamics and IMU-preintegration rollouts. Validation on EuRoC shows improved performance, and underwater robot experiments demonstrate applicability under intermittent lighting failures and visual degradation.

0.20

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.64
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29