CS Paper Radar

Concurrent Learning-Based Inertial Parameter Estimation and Control of Quadrotors

Sandesh Thapa, He Bai

eess.SY cs.RO ·submitted 2026-11-08 18:58 UTC · v1
theory

Abstract

In this letter, we consider trajectory tracking control and inertial parameter estimation of a quadrotor UAV whose center of mass (CoM) does not coincide with its geometric center. Onboard payloads like an IMU, a camera, or a battery are not necessarily placed at its geometric center. Moreover, during the flight these sensors might move because of external disturbances and cause a CoM offset. Thus, these events and equipment introduce an offset and cause the inertia matrix to be non-diagonal. We develop an integral concurrent learning (ICL)-based geometric controller that estimates the mass, the CoM offset, and the full inertia matrix online, without an accelerometer or numerical derivatives, and tracks a given trajectory corrected by the offset estimated online. We prove that the estimated parameters converge to their true values under a finite excitation condition. We validate the effectiveness of the proposed algorithm using a simulation example.

Comment
6 pages, 4 figures. To be submitted to IEEE Control Systems Letters (L-CSS) with the CDC 2027 option

Closest papers

Nearest neighbours by meaning across the whole index.

Extended Model-Based Learned Inertial Odometry

cs.RO ·2026-11-06 ·Sasanka Kuruppu Arachchige, Joni-Kristian Kämäräinen
publishedcode/data similarity 0.68
Abstract · 8 pages, Published at ICUAS 2026

Inertial odometry is a compelling approach to state estimation for agile quadrotor flight due to its affordability, low weight, and robustness to perceptual degradation. However, relying only on integrated inertial measurements is impractical, as sensor errors and time-varying biases lead to significant pose drift. Although recent advances have enabled inertial odometry for drone racing, existing approaches show limited generalization to trajectories not seen during training. This work improves generalization by adopting a body-frame representation and incorporating body-frame torque dynamics into the learning pipeline. The learned model predicts short-horizon relative displacements, which are fused with IMU measurements in an Extended Kalman Filter. Experimental results show that the proposed method outperforms the previous state-of-the-art learned inertial odometry approach for quadrotor pose estimation on unseen trajectories. An additional evaluation on four public quadrotor datasets, with whole trajectory shapes held out of training, confirms a lower velocity error on every held-out set and shows that the torque input is most informative when it is derived from the rotor signals. Code, data pipeline and trained models are publicly available.

0.48

Learning-Oriented Fault-Tolerant Control for UAVs with Time-Varying Fault Estimation

eess.SY ·2026-10-22 ·Moh Kamalul Wafi
published similarity 0.64
Abstract · This is an extended version of the paper published in the proceedings of IEEE CoDIT

The increasing deployment of unmanned aerial vehicles (UAVs) in safety-critical applications has created a growing demand for control strategies that remain reliable in the presence of actuator and sensor faults. This paper presents a fault-tolerant control framework that combines constructive mathematical modeling, proportional--integral (PI) fault estimation, and learning-oriented control. A nonlinear quadcopter model is first developed using both the Newton--Euler and Euler--Lagrange formulations, from which a discrete-time linear model is derived for observer and controller design. A PI observer is then proposed to estimate actuator and sensor faults, with exponential estimation-error convergence established for constant faults in the absence of disturbances and ultimate boundedness established for slowly time-varying faults under bounded disturbances. The estimated fault signals are incorporated into an active fault-tolerant control architecture together with a Deep Deterministic Policy Gradient (DDPG) controller, which is trained using only the yaw channel and subsequently applied to improve closed-loop tracking performance. Numerical simulations illustrate the observer's estimation performance under constant and slowly time-varying faults, including bounded disturbances, and the tracking performance of the integrated controller under multiple actuator and sensor fault scenarios. The proposed framework combines model-based fault estimation with learning-based control to improve fault accommodation and tracking performance in UAV systems.

0.49

Taylor-Informed Predictive Cost Adaptive Control for Quadrotors with Online Gravity-Trim Adaptation

eess.SY ·2026-09-03 ·Tam W. Nguyen
similarity 0.63
Abstract · 6 pages, 4 figures

This paper develops Taylor-informed predictive cost adaptive control (PCAC) for quadrotors with online gravity-trim adaptation. First-, second-, and third-order expansions of the nonlinear dynamics about nominal hover define sparse sampled-data dictionaries for row-wise recursive least-squares identification with variable-rate forgetting. At each step, the identified predictor is linearized at the current state, and its Jacobian is fixed over the prediction horizon. The identified vertical dynamics also estimate the vehicle mass and gravity-trim input, eliminating fixed nominal gravity compensation. Simulations with an abrupt payload change and aggressive helix tracking show that the higher-order predictors improve prediction and tracking while preserving the standard PCAC formulation.

0.29

CALOS: Control-Affine Lyapunov On-manifold Safety Layer for Safe Deep Reinforcement Learning for Quadrotors

cs.RO cs.AI ·2026-09-15 ·Fabrizio Cesareo, Sebastiano Mengozzi, Nicola Mimmo, Andrea Acquaviva
similarity 0.63
Abstract

Deep Reinforcement Learning has demonstrated remarkable capability in quadrotor control, yet learned policies offer no guarantee of respecting safety constraints during training or deployment. We present CALOS (Control-Affine Lyapunov On-manifold Safety), a runtime safety layer that enforces attitude constraints on a quadrotor without modifying the underlying learning algorithm. CALOS formulates four tilt-angle inequalities and a Lyapunov descent condition as a single quadratic program whose solution is the minimum-norm correction to the nominal torque output of the policy. The quadratic program is solved exactly via active-set enumeration over the three-dimensional torque space, with a computational cost low enough to enforce constraints in real time across thousands of parallel simulation environments, as required by modern massively parallel Deep Reinforcement Learning training. Evaluated on trajectory-tracking tasks in NVIDIA Isaac Lab, CALOS reduces lateral tracking error by 55-60% relative to an unconstrained Proximal Policy Optimization baseline while achieving zero attitude-constraint violations on the training trajectory. By restricting exploration to safe regions of the state space, the safety layer also accelerates training convergence and improves data efficiency without producing suboptimal policies.

0.19

Physics-based Online Adaptive Koopman Model Predictive Attitude Control for Combined Spacecraft with Dynamic Uncertainties

eess.SY ·2026-09-02 ·Yicheng Sun, Yueyong Lyu, Yuhan Liu, Yanning Guo, Wei Pan
top venue similarity 0.63
Abstract · 16 pages, 13 figures, 3 tables

This paper proposes a physics-based adaptive Koopman Model Predictive Control (MPC) strategy for combined spacecraft attitude stabilization under inertia uncertainties and active target maneuverability. A novel, quaternion-based Koopman model is constructed from a set of analytical lifting functions derived from the quaternion kinematics, which provides a more compact and physically interpretable linear representation of the nonlinear dynamics compared with the conventional black-box EDMD and higher-dimensional DCM-based model. Leveraging the linear structure of this nominal model, a gradient descent-based update law is employed to efficiently identify time-varying inertial uncertainties from real-time input/output data. By integrating this adaptive linear model into the MPC framework, the optimal control problem reduces to a computationally efficient Quadratic Program (QP), thereby significantly lowering the online computational burden compared to nonlinear adaptive MPC. Recursive feasibility and regional input-to-state stability are formally established through the design of terminal ingredients for the MPC. The effectiveness and superiority of the proposed strategy are validated through comparative simulations of an attitude stabilization task for combined spacecraft in a high-fidelity 3D simulator.

0.48

Aerial Manipulation in the Wild with Onboard Perception, Policy Learning, and Whole-Body Control

cs.RO ·2026-09-24 ·Yuanzhu Zhan, Yufei Jiang, Zemu Zhang, Junyi Geng
published similarity 0.63
Abstract · 5 pages, 4 figures. Accepted by 5th Workshop on Mobile Manipulation and Embodied Intelligence (MoMA.v5) at IROS 2026

Aerial manipulation in outdoor environments remains challenging due to the simultaneous requirements of reliable state estimation, stable aerial motion, and precise manipulation under external disturbances. In this work, we present a real-world outdoor aerial manipulation framework that integrates imitation learning, onboard LiDAR-inertial state estimation, and whole-body model predictive control. A Diffusion Policy is trained from manipulation demonstrations to generate desired end-effector motions from onboard observations. These learned commands are executed by a whole-body MPC that jointly coordinates the aerial platform and manipulator to realize the desired end-effector trajectory. To eliminate reliance on external motion-capture infrastructure, the platform employs onboard LiDAR-inertial odometry for state estimation during outdoor operation. We validate the complete framework on a physical aerial manipulator and demonstrate successful execution of outdoor manipulation tasks. The experimental results show that demonstration-driven manipulation policies can be effectively integrated with onboard state estimation and model-based whole-body control to enable aerial manipulation beyond controlled indoor environments.

0.28

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.62
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

Autonomous fixed-wing interception using reinforcement learning

cs.RO cs.AIcs.NEeess.SY ·2026-10-27 ·Daan van Hamersveld, Ewoud Smeur, Iurii Kriachko
similarity 0.62
Abstract · MSc thesis, Faculty of Aerospace Engineering, Delft University of Technology, 2026. 24 pages, 29 figures, 4 tables

Medium altitude, long endurance unmanned aerial systems such as Shahed-type strike drones are an unanswered threat in modern conflicts. Conventional air defense systems are too expensive to provide a feasible large-scale solution. Quadcopter interceptors are a cheap, battle-proven alternative, but their extremely limited flight time restricts them to low altitude targets at short range, whereas fixed-wing platforms have the endurance to reach higher altitude targets from longer distances. However, such interceptors are still operated manually. Recent developments in learning-based controllers show potential for automation. In this work, a fixed-wing interceptor is presented that is controlled by a neural network that maps filtered monocular vision observations directly to actuator commands. The policy was trained in a custom Python environment using reinforcement learning and proximal policy optimization. The policy was then deployed on a fixed-wing platform and tested in real interception scenarios. As a baseline, two classical guidance controllers were also developed and tested in simulation. The policy is able to intercept targets both in simulation and in real flight. In simulation, the policy outperforms the classical controllers under most conditions. The interceptor was ultimately successfully validated in real flight by intercepting maneuvering fixed-wing targets. This novel system shows the potential of artificial intelligence for autonomous control of fixed-wing interceptor drones.

0.31