CS Paper Radar

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas, Wenzhao Li, Siyu Hong, Kyle Fogarty, Chenliang Zhou, Ali Senguel, Cengiz Oztireli

cs.CV cs.HC ·submitted 2026-09-28 11:55 UTC · v1
benchmarkcode/data

Abstract

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

Comment
5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 2026, Rio de Janeiro, Brazil. Code: https://github.com/ZhilinGuo/one-sensor-whole-body
DOI
10.1145/3841192.3841753

Closest papers

Nearest neighbours by meaning across the whole index.

Reliability-Gated Fusion of Consumer Head and Foot IMUs for Lower-Body 3D Pose

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.72
Abstract · 10 pages, 4 figures, 3 tables. Code: https://github.com/ZhilinGuo/reliability-gated-imu-fusion

Sparse inertial pose estimation promises camera-free motion capture from consumer devices, but consumer sensors are unreliable: firmware-fused orientations are biased, mounting varies between sessions, and streams drift or drop out. On a new 35-take single-subject benchmark pairing an earbud head inertial measurement unit (IMU) with two smart-insole foot IMUs (SAM-3D-Body pseudo-ground-truth labels), we show the reliability problem is channel-level: a channel ablation isolates foot acceleration as the most informative input (66.6 mm vs. 79.0 mm head-only) and the firmware-fused foot orientation as the liability that destroys the gain. We therefore let the model learn how much to trust each channel of each stream: one temporal gate per stream per channel block, trained with an auxiliary reliability objective on synthetically corrupted pretraining data. The channel-gated model is the most accurate of our learned fusion arms on clean data (69.4 mm vs. 83.7 static, 86.6 ungated) and under every simulated fault (bias in training; drift, dropout eval-only); its gates suppress the natively biased foot-orientation channels on clean real data without test-time supervision and flag dropout bursts at 0.92-0.999 AUROC. Two contrasts: dropping a channel known a priori to fail is flat across foot faults but collapses when an unanticipated stream fails (head dropout: 92.9 vs. 79.3 mm); and a fine-tuned HMD-Poser is more accurate on clean data (64.4 mm) and nominally under drift, with no significant paired difference under bias or dropout, but a larger worst-case degradation from clean (+16.1 vs. +3.5 mm, single seed). Learning to gate reliability instead of sensor count is the lever for deployable sparse inertial capture. Code is available at https://github.com/ZhilinGuo/reliability-gated-imu-fusion.

0.37

Robust Real-Time Monocular Human Pose Estimation with Insole-Based Sensor Fusion

cs.CV cs.AI ·2026-10-14 ·Liang Yu, Tao Zhu, Xiangqing Lu, Wenjian Luo, Liming Chen
similarity 0.70
Abstract

Real-time monocular human pose estimation is an important sensing component for human-centered intelligent systems. While recent camera-based methods have achieved impressive accuracy, fundamental challenges persist, particularly when visual observations are incomplete, such as during lower-body occlusion or short out-of-frame intervals. In these challenging but common scenarios, vision-only systems often struggle to reconstruct physically plausible lower-limb motion and reliable foot-ground contact. Due to the highly unobtrusive and wearable nature of smart insoles, this paper investigates whether simple plantar pressure and acceleration sensors can effectively resolve these visually induced limitations. To systematically investigate this, we first collect a synchronized multimodal dataset and then propose a part-decoupled temporal fusion framework. The proposed model fuses foot-sensing features into the lower-body branch to compensate for incomplete visual evidence, while a lightweight coordinator exchanges information between the upper- and lower-body temporal representations to maintain whole-body consistency. The framework is evaluated with three representative real-time visual backbones based on 2D keypoints, 3D landmarks, and SMPL-based human mesh recovery. We evaluate our framework on three representative real-time visual backbones. Quantitative experiments demonstrate that incorporating simple foot sensors consistently improves pose accuracy, motion smoothness, and gait-related measurements over vision-only baselines, with the most significant gains observed under occlusion and short visual-dropout conditions. Ultimately, our results demonstrate that unobtrusive foot sensing provides vital and complementary physical observability when camera observations are temporarily unavailable.

0.20

Fast and Accurate Body Estimation in Pixels, World Space and Scenes

cs.CV cs.RO ·2026-11-19 ·Jinkun Cao
code/data similarity 0.70
Abstract · 28 pages, 9 pages of main text. 16 figures

We present FAB (Fast and Accurate Body estimation), a human body estimator that jointly improves inference efficiency and body-recovery fidelity. Rather than predicting only parametric mesh-model parameters, FAB directly predicts human skeleton joints and dense surface points. In images, it predicts dense 2D and 3D body points alongside a parametric Momentum Human Rig (MHR) head, then fits SMPL in one learned pass followed by two Gauss-Newton steps. Its ViT-L student, FAB-L, distilled from a fine-tuned SAM 3D Body, runs in real time for one person on an RTX 4070 Ti SUPER, from detection to a fitted body, at 4.6x the speed of SAM 3D Body's eager-PyTorch body-only path, while improving accuracy on most camera-space benchmarks. The same network predicts heel, toe, hand, and knee contacts, which connect the body to the scene. FAB also estimates world-space motion, fuses static-scene depth around the visible person, and aligns body and scene using predicted contacts. For human-to-humanoid real-to-sim transfer, an in-model G1 head and FAB-Retarget, a motion-level retargeter that reads dense points or the fitted mesh, map motion to a Unitree G1. FAB-Retarget produces references that follow the person more closely than specialized retargeters including SOMA, GMR, UMR, and OmniRetarget, and substantially more closely than Fast SAM 3D Body retargeted with our sequence IK. Project page: https://www.jinkuncao.com/FAB.

0.22

EgoWholeView: Camera-Only Head-Mounted Capture of Body and Bimanual Hand Motion for Embodied Demonstrations

cs.CV ·2026-10-12 ·Yaoqing Hu, Xuguo He, Daohan Cui, Yukun Shi, Kai Chen
benchmark similarity 0.70
Abstract · 17 pages, 9 figures

Head-mounted body and bimanual motion capture supports self-avatars, teleoperation, and embodied demonstrations. However, a single egocentric camera is vulnerable to a limited field of view, scale ambiguity, and hand-object occlusion. We present EgoWholeView, a wearable capture system of six synchronized wide-angle RGB cameras with a role-specialized pipeline. The outward views localize the rig in a world frame, while an overlapping downward pair independently predicts SMPL-X body and MANO hand parameters. Both predictors are adapted to egocentric fisheye data. To combine the two, reliability cues measured from the predictions themselves weight the fusion of body and hand joint rotations, while shape is aggregated across views and frames. The pair's baseline fixes metric scale, and triangulation recovers root translation. Relative to monocular prediction, fusion reduces PA-MPJPE by 3.7% for the body and 11.2% for the hands, and temporal refinement lowers angular-acceleration magnitude by 32.2% and 31.0%, respectively. On our six-camera recording, the pipeline produces body and hand states in a shared world frame using benchmark-fitted gates without retuning, and temporal refinement lowers hand acceleration magnitude by 41.08%. Using only RGB cameras and no third-person view, EgoWholeView offers a low-cost, portable route to egocentric interaction data.

0.35

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.69
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

MuCHMDPoser: Multiview RGB-Camera Full-Body Pose Tracking for Virtual Reality

cs.CV ·2026-11-02 ·Antoine Maiorca, George Fletcher, Thierry Ravet, Thierry Dutoit
code/data similarity 0.68
Abstract

Accurate full-body tracking in Virtual Reality (VR) is heavily underconstrained when relying solely on consumer-grade sparse sensors, such as Head-Mounted Displays (HMDs) and handheld controllers. Indeed, the self-avatar full-body pose must be inferred based on the 3 available upper-body joints tracked by these devices. This leads to significant tracking error, especially in lower-body pose. To overcome this issue, we propose to extend the tracking setup with external multiview RGB cameras. We show that integrating RGB-based pose estimation this framework is able to significantly decrease lower-body tracking errors, even under common artifacts in RGB-based estimates. Additionally, we evaluate a only-once HMD-camera calibration procedure that does not require any physical markers. We finally propose an implementation of the overall framework, achieving an end-to-end animation at 60 FPS on a Nvidia RTX3080 GPU. Codes are available at https://github.com/antmaio/MuCHMDPoser.

0.38

OmniPoser: Flexible Human Motion Recovery in the Wild with Masked Flow Matching

cs.CV ·2026-10-14 ·Minghao Liu, Tutian Tang
top venuecode/data similarity 0.68
Abstract · Accepted as a poster at the European Conference on Computer Vision (ECCV) 2026

Recovering 3D human motion from sparse wearable sensors is challenging due to the inherent noise, occlusion, and instability of real-world tracking signals. Existing approaches are restricted to fixed sensor configurations and, when built on diffusion models, are computationally prohibitive for real-time deployment. We propose OmniPoser, a universal framework that recovers full-body SMPL motion from a flexible combination of heterogeneous inputs, such as 3D keypoints, sparse IMU rotations, head-mounted 6-DoF poses, or any subset thereof, within a single model. OmniPoser introduces a cross-modal masking mechanism paired with a Masked Conditioning Encoder, enabling one architecture to incorporate diverse sensor configurations through a masked design. A decoupled dual-stream generative backbone generates complete motion via Conditional Flow Matching, requiring only a single ODE integration step at inference. Across three settings and seven benchmarks, including in-the-wild Nymeria and Ego-Exo4D datasets, OmniPoser performs on par with state-of-the-art methods while running at over 700 FPS. The project page is available at https://jamesbridgewater51.github.io/omniposer-eccv/.

0.57

Wear and Go: Calibration Free Sparse Inertial Motion Capture via Online Sensor Setup Estimation

cs.CV ·2026-11-17 ·Yuanshuo Tan, Licheng Zhong
similarity 0.67
Abstract

Sparse inertial motion capture typically assumes that each sensor's anatomical identity and mounting orientation are known. We present MOSAIC (Motion-based Sensor Assignment and Inertial Calibration), a framework that recovers this setup from ordinary motion without a calibration pose. Our central insight is that body pose changes continuously while the sensor setup persists, allowing movements that are individually ambiguous to provide complementary evidence over time. A setup network processes unordered sensor streams with temporal and cross-sensor attention, then accumulates assignment and rotation evidence into a session-level estimate. The recovered setup canonicalizes measurements for frozen pretrained pose estimators, separating sensor configuration from motion reconstruction. For sensors worn at prescribed body sites, evaluation on real inertial recordings with randomized setups shows near-calibrated pose accuracy for bounded offsets and substantial benefits from accumulation under arbitrary orientations. Transfer across pose networks supports setup recovery as a reusable interface between interchangeable sensors and pretrained pose models.

0.18