CS Paper Radar

Robust Real-Time Monocular Human Pose Estimation with Insole-Based Sensor Fusion

Liang Yu, Tao Zhu, Xiangqing Lu, Wenjian Luo, Liming Chen

cs.CV cs.AI ·submitted 2026-10-14 03:14 UTC · v1

Abstract

Real-time monocular human pose estimation is an important sensing component for human-centered intelligent systems. While recent camera-based methods have achieved impressive accuracy, fundamental challenges persist, particularly when visual observations are incomplete, such as during lower-body occlusion or short out-of-frame intervals. In these challenging but common scenarios, vision-only systems often struggle to reconstruct physically plausible lower-limb motion and reliable foot-ground contact. Due to the highly unobtrusive and wearable nature of smart insoles, this paper investigates whether simple plantar pressure and acceleration sensors can effectively resolve these visually induced limitations. To systematically investigate this, we first collect a synchronized multimodal dataset and then propose a part-decoupled temporal fusion framework. The proposed model fuses foot-sensing features into the lower-body branch to compensate for incomplete visual evidence, while a lightweight coordinator exchanges information between the upper- and lower-body temporal representations to maintain whole-body consistency. The framework is evaluated with three representative real-time visual backbones based on 2D keypoints, 3D landmarks, and SMPL-based human mesh recovery. We evaluate our framework on three representative real-time visual backbones. Quantitative experiments demonstrate that incorporating simple foot sensors consistently improves pose accuracy, motion smoothness, and gait-related measurements over vision-only baselines, with the most significant gains observed under occlusion and short visual-dropout conditions. Ultimately, our results demonstrate that unobtrusive foot sensing provides vital and complementary physical observability when camera observations are temporarily unavailable.

Closest papers

Nearest neighbours by meaning across the whole index.

PressureMesh: 3D Human Mesh Estimation from Multi-Device Pressure Images

cs.CV ·2026-08-10 ·Changhai Ma, Ziyu Wu, Yunkang Zhang, Fangting Xie, Mengting Niu +6 more
similarity 0.75
Abstract

Human pose monitoring is crucial in fields such as rehabilitation assessment and human-computer interaction. Due to its privacy-preserving nature, pressure-based human pose monitoring has become a primary approach for unobtrusive sensing. However, existing methods are generally limited to a single device, which restricts the effective monitoring range. To address this limitation, we propose MDP-Net, an end-to-end network capable of directly estimating human meshes from temporal pressure data across multiple devices. We introduce a multimodal fusion mechanism inspired by the Mixture of Experts (MoE) framework to achieve effective complementarity and enhancement of cross-device pressure information. To support the training and evaluation of MDP-Net, we constructed MDP, a high-quality multi-device temporal pressure dataset that includes various pose labels such as 2D/3D joints and human meshes. Experimental results demonstrate that MDP-Net achieves a joint position error of 12.6 cm on the MDP dataset. These results prove that fusing multi-device pressure information is an effective and promising new solution for daily human pose monitoring.

0.04

ExMR: Extremity Motion Refinement for Monocular Human Motion Capture

cs.CV ·2026-10-19 ·Tom Wehrbein, Bodo Rosenhahn
code/data similarity 0.72
Abstract · Extended version of the 3DV 2026 paper "Improving 3D Foot Motion Reconstruction in Markerless Monocular Human Motion Capture". 17 pages main…

Detailed hand and foot articulation is important for animation and motion analysis, yet remains challenging to recover from monocular video. Recent expressive video methods infer hand articulation from shared whole-body representations. Our conference work suggests that this underexploits local evidence: the Foot Motion Refinement (FootMR) module refines ankle rotations from foot keypoints, improving reconstruction even when the initial estimator receives the same keypoints. We extend this principle to hands with the Hand Motion Refinement (HandMR) module. Because 2D finger keypoints are often missing or unreliable, HandMR combines image features of a pretrained hand reconstruction model with initial arm and hand rotations to refine elbows, wrists, and fingers. We integrate FootMR and HandMR into ExMR (Extremity Motion Refinement), a system for reconstructing 3D body, hand, and foot motion from monocular video. An initial temporal estimator predicts whole-body motion, after which both refiners revisit local evidence to predict residual joint rotations. Experiments on ARCTIC, MOYO, RICH, and MOOF show that ExMR outperforms state-of-the-art methods in hand and foot reconstruction, reducing hand per-vertex error and ankle joint angle error on MOYO by 19% and 18%, respectively, relative to the strongest competitor. Code will be made available for research purposes. Project page: https://twehrbein.github.io/exmr-website/

0.31

EgoExplorer: A Vision-Motion-Touch Observatory for Human Loco-Manipulation In Situ

cs.RO cs.CV ·2026-10-13 ·Yunsong Zhou, Xuekun Jiang, Haiqi Shen, Hangxu Liu, Chaojian Shi +9 more
code/datacommunity pick similarity 0.71
Abstract · Project page: internrobotics.github.io/egoexplorer.github.io/

Learning humanoid loco-manipulation from human demonstrations rests on observing how locomotion, posture, and object interaction evolve together as tasks unfold. Scaling collection across diverse environments, in turn, favors lightweight, portable capture systems. Yet, existing datasets provide only partial views of this coordination. Thus, we introduce EgoExplorer, a 100-hour vision-motion-touch observatory of human loco-manipulation built with a wearable system. With an emphasis on professional activities, its continuous recordings align egocentric video with reconstructed whole-body motion, fine-grained finger articulation, and tactile observations, accompanied by step-level descriptions. To achieve this coverage with sparse body sensing, we develop the Calibrate-Complete-Constrain pipeline. Concretely, reusable calibration fixes participant geometry and sensor attachments before motion inference to disentangle mounting offsets from articulation. A temporal prior then completes unobserved joint motion, while layered constraints promote measurement agreement, temporal continuity, and geometric consistency, properties that motion plausibility alone does not guarantee. Against tracker-fitted references, the method reduces body-point error by 71.9% relative to the strongest baseline; matched evaluations also show gains in hand stability and contact estimation. Preliminary studies explore multimodal generation and conditioning alongside humanoid retargeting with whole-body control in simulation.

0.57

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.70
Abstract · 5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 202…

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

0.63

EgoWholeView: Camera-Only Head-Mounted Capture of Body and Bimanual Hand Motion for Embodied Demonstrations

cs.CV ·2026-10-12 ·Yaoqing Hu, Xuguo He, Daohan Cui, Yukun Shi, Kai Chen
benchmark similarity 0.69
Abstract · 17 pages, 9 figures

Head-mounted body and bimanual motion capture supports self-avatars, teleoperation, and embodied demonstrations. However, a single egocentric camera is vulnerable to a limited field of view, scale ambiguity, and hand-object occlusion. We present EgoWholeView, a wearable capture system of six synchronized wide-angle RGB cameras with a role-specialized pipeline. The outward views localize the rig in a world frame, while an overlapping downward pair independently predicts SMPL-X body and MANO hand parameters. Both predictors are adapted to egocentric fisheye data. To combine the two, reliability cues measured from the predictions themselves weight the fusion of body and hand joint rotations, while shape is aggregated across views and frames. The pair's baseline fixes metric scale, and triangulation recovers root translation. Relative to monocular prediction, fusion reduces PA-MPJPE by 3.7% for the body and 11.2% for the hands, and temporal refinement lowers angular-acceleration magnitude by 32.2% and 31.0%, respectively. On our six-camera recording, the pipeline produces body and hand states in a shared world frame using benchmark-fitted gates without retuning, and temporal refinement lowers hand acceleration magnitude by 41.08%. Using only RGB cameras and no third-person view, EgoWholeView offers a low-cost, portable route to egocentric interaction data.

0.35

OmniPoser: Flexible Human Motion Recovery in the Wild with Masked Flow Matching

cs.CV ·2026-10-14 ·Minghao Liu, Tutian Tang
top venuecode/data similarity 0.68
Abstract · Accepted as a poster at the European Conference on Computer Vision (ECCV) 2026

Recovering 3D human motion from sparse wearable sensors is challenging due to the inherent noise, occlusion, and instability of real-world tracking signals. Existing approaches are restricted to fixed sensor configurations and, when built on diffusion models, are computationally prohibitive for real-time deployment. We propose OmniPoser, a universal framework that recovers full-body SMPL motion from a flexible combination of heterogeneous inputs, such as 3D keypoints, sparse IMU rotations, head-mounted 6-DoF poses, or any subset thereof, within a single model. OmniPoser introduces a cross-modal masking mechanism paired with a Masked Conditioning Encoder, enabling one architecture to incorporate diverse sensor configurations through a masked design. A decoupled dual-stream generative backbone generates complete motion via Conditional Flow Matching, requiring only a single ODE integration step at inference. Across three settings and seven benchmarks, including in-the-wild Nymeria and Ego-Exo4D datasets, OmniPoser performs on par with state-of-the-art methods while running at over 700 FPS. The project page is available at https://jamesbridgewater51.github.io/omniposer-eccv/.

0.57

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.68
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

Now You See Them, Now You Dont FusionGhost Gait for Occlusion-Robust Gait Recognition with ArabGait dataset

cs.CV ·2026-10-31 ·Seba Al Mokdad, Tamer Shanableh, Reham Mohamed Aburas
similarity 0.67
Abstract · Submitted to "Engineering Applications of Artificial Intelligence", Elsevier

Skeleton-based gait recognition is generally more robust to appearance changes than pixel-based methods, but this robustness depends on stable pose extraction. Clothing variation in gait recognition includes changes in garments, silhouette, and carried items; under Gulf clothing (Kandoora/Abaya), the dominant failure mode shifts from appearance change to lower-limb pose degradation caused by severe occlusion. To study this regime, we introduce ArabGait, a 45-subject indoor multi-view dataset with four walking conditions across three viewpoints, and show that Gulf clothing lowers mean lower-limb confidence from 0.811 to 0.683 and raises lower-limb failure rate from 7.98% to 17.82%, with ankles most affected. We propose FusionGhost-Gait, a fused spatiotemporal architecture that integrates spatial graph blocks and temporal modeling in one residual unit, removes redundant channel projections, and uses compact temporal Ghost kernels as a lightweight regularization mechanism for pose-noisy trajectories while preserving efficient temporal downsampling. On ArabGait cross-clothing evaluation, including Protocol A and Protocol B, FusionGhost-Gait reaches up to 67.91% Rank-1 while remaining compact (108,970- 133,674 parameters and 0.035-0.052 billion floating-point operations (GFLOPs)), achieving more than 65% fewer parameters and 75% lower FLOPs than existing baselines. These results indicate that the proposed model generalizes effectively to challenging Gulf-clothing conditions while remaining lightweight and deployable for surveillance and access-control biometric systems.

0.14