CS Paper Radar

Wear and Go: Calibration Free Sparse Inertial Motion Capture via Online Sensor Setup Estimation

Yuanshuo Tan, Licheng Zhong

cs.CV ·submitted 2026-11-17 15:02 UTC · v1

Abstract

Sparse inertial motion capture typically assumes that each sensor's anatomical identity and mounting orientation are known. We present MOSAIC (Motion-based Sensor Assignment and Inertial Calibration), a framework that recovers this setup from ordinary motion without a calibration pose. Our central insight is that body pose changes continuously while the sensor setup persists, allowing movements that are individually ambiguous to provide complementary evidence over time. A setup network processes unordered sensor streams with temporal and cross-sensor attention, then accumulates assignment and rotation evidence into a session-level estimate. The recovered setup canonicalizes measurements for frozen pretrained pose estimators, separating sensor configuration from motion reconstruction. For sensors worn at prescribed body sites, evaluation on real inertial recordings with randomized setups shows near-calibrated pose accuracy for bounded offsets and substantial benefits from accumulation under arbitrary orientations. Transfer across pose networks supports setup recovery as a reusable interface between interchangeable sensors and pretrained pose models.

Closest papers

Nearest neighbours by meaning across the whole index.

CoWear: Towards Collaborative Wearable Inertial Localization with Multiple Smart Devices

cs.RO ·2026-10-14 ·Zhuoyuan She, Zhanpeng Zhang, Yapeng Chen, Jiale Wang, Xin Xie +1 more
dataset similarity 0.69
Abstract · 8 pages, 5 figures

Consumer smart devices observe the same human motion from different body locations, yet existing inertial-localization benchmarks rarely provide synchronized heterogeneous wearables with device-specific motion ground truth. We present CoWear, a dataset and reference framework for collaborative inertial localization using a smartphone, smartwatch, and smart glasses. The dataset contains over 30 participants, over 300 walking sessions, and more than 30 hours and 100 km of aggregate device trajectories, with each device individually tracked by motion capture. To enable collaboration across distinct body motions, we train role-specific estimators to predict the displacement of a common reference device over synchronized temporal windows. Their predictions are transformed to the world frame using gyroscope integration and fused according to learned uncertainty. Experiments using phone, glasses, and watch as reference targets show that multi-device fusion consistently improves both displacement and trajectory rollout accuracy over individual-device estimation. CoWear provides a dataset and reproducible baseline for studying collaborative inertial localization across heterogeneous consumer wearables.

0.26

EgoExplorer: A Vision-Motion-Touch Observatory for Human Loco-Manipulation In Situ

cs.RO cs.CV ·2026-10-13 ·Yunsong Zhou, Xuekun Jiang, Haiqi Shen, Hangxu Liu, Chaojian Shi +9 more
code/datacommunity pick similarity 0.69
Abstract · Project page: internrobotics.github.io/egoexplorer.github.io/

Learning humanoid loco-manipulation from human demonstrations rests on observing how locomotion, posture, and object interaction evolve together as tasks unfold. Scaling collection across diverse environments, in turn, favors lightweight, portable capture systems. Yet, existing datasets provide only partial views of this coordination. Thus, we introduce EgoExplorer, a 100-hour vision-motion-touch observatory of human loco-manipulation built with a wearable system. With an emphasis on professional activities, its continuous recordings align egocentric video with reconstructed whole-body motion, fine-grained finger articulation, and tactile observations, accompanied by step-level descriptions. To achieve this coverage with sparse body sensing, we develop the Calibrate-Complete-Constrain pipeline. Concretely, reusable calibration fixes participant geometry and sensor attachments before motion inference to disentangle mounting offsets from articulation. A temporal prior then completes unobserved joint motion, while layered constraints promote measurement agreement, temporal continuity, and geometric consistency, properties that motion plausibility alone does not guarantee. Against tracker-fitted references, the method reduces body-point error by 71.9% relative to the strongest baseline; matched evaluations also show gains in hand stability and contact estimation. Preliminary studies explore multimodal generation and conditioning alongside humanoid retargeting with whole-body control in simulation.

0.57

Pose2Muscle: Structured Spatio-Temporal Decoding for Discrete Muscle Activity Estimation from Human Pose

cs.CV ·2026-09-16 ·Yuepeng Chen, Jiehong Shi, Kaili Zheng, Boyi Zhang, Chenyi Guo +2 more
dataset similarity 0.68
Abstract

Muscle activity is fundamental to human movement, and understanding its patterns is critical for injury prevention and rehabilitation. Conventional muscle activity monitoring relies on specialized sensors such as surface electromyography, which limits its practicality for long-term real-world use. Existing studies suggest that muscle-related information can be inferred from human pose. However, the substantial gap between externally observable pose and internal muscle activation, limits the accuracy and generalization of current approaches. In this study, we propose Pose2Muscle, a pose-driven framework for discrete muscle activity estimation without requiring sEMG signals at inference time. Instead of directly regressing continuous sEMG signals, Pose2Muscle reformulates muscle estimation as a structured prediction problem over discrete muscle activity states, yielding a more stable and interpretable target space. The framework combines multi-scale spatio-temporal attention to capture motion patterns at complementary spatial and temporal scales with a directed acyclic graph-based decoder that maintains multiple candidate muscle-state hypotheses and performs structured trajectory inference over time. To support this task, we construct PoseEMG-43, a synchronized pose-sEMG dataset containing 2,992 movement instances from 43 daily-life actions performed by 14 participants. Experiments show that Pose2Muscle consistently outperforms representative retrieval- and pose-based baselines. It achieves an Adjacent-level Accuracy of 86.36% and a Pearson correlation coefficient of 0.8821 under the Random Split, and 63.97% and 0.6795, respectively, under the Subject-Level Split. These results demonstrate the feasibility of inferring structured muscle-state patterns from human pose and suggest the potential of Pose2Muscle for muscle-aware movement analysis when direct physiological sensing is impractical

0.28

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.67
Abstract · 5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 202…

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

0.63

ArmPoser: Real-Time, Calibration-Free Arm Pose Estimation from Smartwatch IMU

cs.CV cs.HC ·2026-09-08 ·Bishnu Dev, Vasco Xu, Xi-Aan Loh, Chenfeng Gao, Henry Hoffmann +1 more
published similarity 0.67
Abstract

Arm pose estimation enables applications in fitness, extended reality input, rehabilitation, and life logging. Prior smartwatch-based approaches rely on calibration poses and preprocessing pipelines that transform raw IMU measurements into standardized training formats. These steps hinder deployment in everyday settings and introduce errors due to imperfect calibration and sensor drift. We present ArmPoser, a calibration-free arm pose estimation system using a single smartwatch IMU. Our central contribution is training models directly in the reference frame native to consumer smartwatches, aligning learning with how IMU data is produced by deployed devices. By operating on device-native axes, ArmPoser removes the need for coordinate transformations, explicit alignment, and bone-offset calibration used in prior work. We further augment training with physically grounded variations in watch placement and arm morphology to account for user-specific variability. ArmPoser also includes a wear-configuration module that infers anterior or posterior forearm placement and crown orientation. We evaluate pose estimation on public benchmarks and on a 10-participant, 30-activity study using watchOS and Android smartwatches, where ArmPoser matches or exceeds calibrated baselines without any user calibration.

0.28

StickFigure: Enabling Pose-Only IoT Cameras for Privacy-Preserving Edge Vision

cs.CV ·2026-10-25 ·Aveline Xiaoyuan Han, Chenshu Wu
similarity 0.67
Abstract · 14 pages, 9 figures

Indoor IoT cameras can support assisted living and activity-aware spaces, but exporting raw RGB frames raises privacy concerns by exposing facial, clothing, and household details that body-motion tasks often do not require. We present StickFigure, a pose-only IoT camera system that, during real-time monitoring, keeps raw frames local and ephemeral while exporting only compact skeleton streams sufficient for downstream human activity recognition (HAR). While pose estimation has matured on GPUs, extracting accurate pose streams on resource-constrained IoT cameras remains difficult. To overcome these challenges and enable on-device pose streams on (almost) any IoT camera, we present two core designs in StickFigure: an activation-aware pose backbone that allocates channel capacity after spatial downsampling and a lightweight hierarchical MLP refiner that selectively corrects elbow and wrist coordinates using intermediate visual features and kinematic context. We fully implement StickFigure and evaluate it on public benchmarks and real-world deployment. Compared with state-of-the-art MCU pose models, StickFigure achieves the highest pose accuracy and downstream HAR utility on both NTU RGB+D and Penn Action, while using 96.5% fewer parameters and 99.3% fewer MACs per frame than RTMPose-S-based baselines, achieving 0.107 s p95 latency on a representative STM32H753 MCU. We believe StickFigure establishes a new operating point for privacy-aware edge vision on massive IoT cameras.

0.19

Impact of Patient Orientation in Single- and Multi-View Camera Environments for AI-based Rehabilitation Monitoring

cs.CV ·2026-09-28 ·Miriama Jánošová, Andreas Lang, Petra Budikova, Jan Sedmidubsky
dataset similarity 0.67
Abstract

Automated quality assessment of rehabilitation exercises relies heavily on accurate human pose estimation from video data. Although numerous RGB-based pose estimation methods have been proposed, the impact of camera placement on detecting clinically relevant movement errors remains insufficiently explored. To address this gap, we introduce REHAB26-ViewAngles, a dataset comprising correct and incorrect rehabilitation exercise executions captured from a wide range of camera angles. Furthermore, we propose a novel separability metric to quantify an algorithm's ability to distinguish between valid and faulty exercise repetitions. Using these tools, we analyze how various RGB-based pose-estimation strategies are suitable for exercise quality assessment under varying camera placements. In particular, we analyze single-camera 2D and 3D pose estimation and four multi-camera strategies: a combination of two orthogonal 2D views, 3D triangulation, weighted 3D fusion, and an AI-based pose-estimation transformer model specifically trained from two synchronized cameras. Our findings reveal that an optimally placed 2D camera can improve the separability by 16.9% over the commonly used 0° frontal view and frequently outperforms single-camera 3D estimation, while combining two views can further improve accuracy by up to 13.1%. These results offer practical guidance for deploying rehabilitation monitoring in both home and clinical settings.

0.09

Rotation-Invariant Multi-IMU Activity Recognition under Independent Per-Location Orientation Shifts

cs.AI cs.LG ·2026-08-16 ·Seungyeol Baek, Yoonbyung Chai, Yonghyeon Lee, Sungjoon Choi, Sungho Suh
published similarity 0.66
Abstract · 6 pages, 2 figures. ACM International Symposium on Wearable Computing (ISWC) 2026

Human Activity Recognition (HAR) with self-administered wearables, such as at-home rehabilitation and exercise monitoring, often requires reattaching inertial measurement units (IMUs) across sessions. In multi-IMU settings, this can induce independent orientation offsets across body locations, a deployment shift that conventional scalar HAR models do not structurally handle. Existing remedies rely on rotation augmentation, whose robustness depends on sampled transformations, or calibration and orientationnormalization pipelines requiring additional reference-frame assumptions or explicit procedures. We present Truly Rotation-Invariant HAR (TRI-HAR), a rotation-invariant framework that makes robustness to independent per-location IMU orientation offsets a structural model property. TRI-HAR reshapes accelerometer and gyroscope streams into triaxial vectors, applies a shared SO(3)-equivariant backbone and invariant projection to each IMU location, and fuses the resulting invariant features for activity classification. Across four multi-IMU benchmarks, TRI-HAR preserves macro-F1 under fixed independent per-location SO(3) rotations and outperforms rotation-augmented baselines under this target shift without requiring rotational augmentation.

0.58