CS Paper Radar

StickFigure: Enabling Pose-Only IoT Cameras for Privacy-Preserving Edge Vision

Aveline Xiaoyuan Han, Chenshu Wu

cs.CV ·submitted 2026-10-25 07:58 UTC · v1

Abstract

Indoor IoT cameras can support assisted living and activity-aware spaces, but exporting raw RGB frames raises privacy concerns by exposing facial, clothing, and household details that body-motion tasks often do not require. We present StickFigure, a pose-only IoT camera system that, during real-time monitoring, keeps raw frames local and ephemeral while exporting only compact skeleton streams sufficient for downstream human activity recognition (HAR). While pose estimation has matured on GPUs, extracting accurate pose streams on resource-constrained IoT cameras remains difficult. To overcome these challenges and enable on-device pose streams on (almost) any IoT camera, we present two core designs in StickFigure: an activation-aware pose backbone that allocates channel capacity after spatial downsampling and a lightweight hierarchical MLP refiner that selectively corrects elbow and wrist coordinates using intermediate visual features and kinematic context. We fully implement StickFigure and evaluate it on public benchmarks and real-world deployment. Compared with state-of-the-art MCU pose models, StickFigure achieves the highest pose accuracy and downstream HAR utility on both NTU RGB+D and Penn Action, while using 96.5% fewer parameters and 99.3% fewer MACs per frame than RTMPose-S-based baselines, achieving 0.107 s p95 latency on a representative STM32H753 MCU. We believe StickFigure establishes a new operating point for privacy-aware edge vision on massive IoT cameras.

Comment
14 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Wear and Go: Calibration Free Sparse Inertial Motion Capture via Online Sensor Setup Estimation

cs.CV ·2026-11-17 ·Yuanshuo Tan, Licheng Zhong
similarity 0.67
Abstract

Sparse inertial motion capture typically assumes that each sensor's anatomical identity and mounting orientation are known. We present MOSAIC (Motion-based Sensor Assignment and Inertial Calibration), a framework that recovers this setup from ordinary motion without a calibration pose. Our central insight is that body pose changes continuously while the sensor setup persists, allowing movements that are individually ambiguous to provide complementary evidence over time. A setup network processes unordered sensor streams with temporal and cross-sensor attention, then accumulates assignment and rotation evidence into a session-level estimate. The recovered setup canonicalizes measurements for frozen pretrained pose estimators, separating sensor configuration from motion reconstruction. For sensors worn at prescribed body sites, evaluation on real inertial recordings with randomized setups shows near-calibrated pose accuracy for bounded offsets and substantial benefits from accumulation under arbitrary orientations. Transfer across pose networks supports setup recovery as a reusable interface between interchangeable sensors and pretrained pose models.

0.26

Physics-Bounded mmWave Sensing for Schedulable, Privacy-Preserving Human Pose Estimation

cs.HC ·2026-08-14 ·Shuntian Zheng, Hongyang He, Jiaqi Li, Xiaoman Lu, Doeon Kim +4 more
similarity 0.66
Abstract

Millimeter-wave (mmWave) is a promising modality for human pose estimation (HPE) in mobile deployments with strong privacy requirements and limited resources, such as fall detection in bathrooms or activity monitoring in bedrooms, where cameras are inadmissible and computationally demanding processing is infeasible. Although mmWave signals naturally confine human reflections to compact, physically bounded regions, the algorithmic foundations of existing systems fail to provide deterministic execution and accuracy guarantees. They either process the full spectrum uniformly, resulting in unpredictable latency that varies across different scenes, or apply lossy compression that discards vital pose structures. To address this, we present PRISM, a framework that exploits the spatial concentration of RF reflections to achieve schedulable edge HPE. PRISM introduces three core components: 1) Physics-Bounded Integral Processing (PBIP), which restricts computation via constant-time integral queries; 2) Physics-Adaptive Instance Proposal (PAIP), which decomposes scenes involving multiple people into bounded local subproblems; and 3) Deadline-Aware Operation Profiles (DAOP), which provide offline-verified worst-case bounds for runtime quality-latency trade-offs. We evaluate PRISM on four public datasets spanning diverse radar configurations, reporting physical-bound and pose-accuracy measurements across this suite and examining deadline-aware scheduling on multi-person recordings together with an additional single-person set. Under single-threaded isolated execution, PRISM reduces 99th-percentile latency by 24\%--58\% relative to baselines that miss the deadline, records a 0.0\% miss rate on the evaluated traces, and attains the highest pose accuracy among deadline-feasible configurations, providing a practical route toward schedulable mmWave sensing on mobile edge hardware.

0.04

Edge AI on Constrained Devices for Binary Sleep-Wake Classification in Dynamic Environments

cs.LG ·2026-09-24 ·Stefan Reitmann, Lena Oden
similarity 0.64
Abstract

This paper presents an Edge AI-based system for detecting sleep and wake states in non-stationary mobile environments using resource-constrained embedded hardware. Conventional approaches relying on accelerometer-based activity metrics are highly susceptible to motion and vibration artifacts and are limited by strict compute and energy budgets of wearable and IoT devices. To address these challenges, a multimodal pipeline is designed and implemented on an ESP32-S3 microcontroller. The system combines inertial sensing for head movement analysis and visual pose classification. A dual-core architecture with FreeRTOS enables parallel execution of real-time data acquisition and on-device inference. Sleep detection follows a two-stage strategy: low-movement detection over a temporal window, followed by visual validation of poses. Experimental results show accuracies of 96.5% for motion-based detection and 89% for pose classification, yielding robust binary sleep-wake classification. Field tests confirmed feasibility in representative mobile scenarios. The results demonstrate that privacy-preserving, local sleep detection is achievable on edge hardware through careful co-design, while highlighting limitations in sensing intrusiveness, dataset scale, and system integration.

0.26

PressureMesh: 3D Human Mesh Estimation from Multi-Device Pressure Images

cs.CV ·2026-08-10 ·Changhai Ma, Ziyu Wu, Yunkang Zhang, Fangting Xie, Mengting Niu +6 more
similarity 0.64
Abstract

Human pose monitoring is crucial in fields such as rehabilitation assessment and human-computer interaction. Due to its privacy-preserving nature, pressure-based human pose monitoring has become a primary approach for unobtrusive sensing. However, existing methods are generally limited to a single device, which restricts the effective monitoring range. To address this limitation, we propose MDP-Net, an end-to-end network capable of directly estimating human meshes from temporal pressure data across multiple devices. We introduce a multimodal fusion mechanism inspired by the Mixture of Experts (MoE) framework to achieve effective complementarity and enhancement of cross-device pressure information. To support the training and evaluation of MDP-Net, we constructed MDP, a high-quality multi-device temporal pressure dataset that includes various pose labels such as 2D/3D joints and human meshes. Experimental results demonstrate that MDP-Net achieves a joint position error of 12.6 cm on the MDP dataset. These results prove that fusing multi-device pressure information is an effective and promising new solution for daily human pose monitoring.

0.04

Tele360: Real-Time Feed-Forward Human Reconstruction from Sparse Unposed Cameras

cs.CV ·2026-09-14 ·Hanzhang Tu, Zhanfeng Liao, Wei Min, Jiajun Zhang, Yebin Liu
similarity 0.61
Abstract

Live free-viewpoint visualization of real humans is critical for immersive communication and interactive digital experiences. Existing methods either rely on computationally expensive optimization or require calibrated cameras and low-resolution inputs, making real-time high-resolution deployment impractical. In this work, we present Tele360, the first real-time feed-forward system for dynamic human reconstruction and live free-viewpoint visualization from sparse, unposed RGB streams. Our system jointly estimates camera poses and reconstructs a dynamic 3D Gaussian representation for each time instance in a single forward pass. To achieve this, we start by designing a lightweight sparsity-aware multi-view transformer backbone that tokenizes foreground human regions while preserving global context through a shared scene token. We then employ a fully transformer-based Gaussian decoder to mitigate convolution-induced over-smoothing while keeping decoding sparse and efficient. In addition, we introduce a hybrid feature pyramid that injects multi-scale appearance cues into geometry prediction. We further introduce a lightweight differentiable Levenberg-Marquardt camera refinement layer to enhance multi-view consistency and geometric alignment. Moreover, to stabilize learning under sparse, unposed inputs, we transfer multi-view geometry priors from a large visual-geometry foundation model via teacher-student distillation. Finally, the predicted Gaussian maps are streamed with video codecs to remote devices for interactive free-viewpoint rendering. Extensive experiments show that Tele360 achieves state-of-the-art visual quality on studio benchmarks while supporting real-time 2K input-to-rendering at over 25 FPS on a single consumer GPU. Additional captured sequences illustrate its performance across varied subjects, clothing, and motions under our multi-camera setup.

0.20

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.61
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

Seeing the World and the Self from Egocentric Video

cs.CV ·2026-09-01 ·Kai Guan, Minchao Jiang, Ruichen WangLi, Wentao Zhu, Lei Zhang
similarity 0.61
Abstract

Complete 3D perception from egocentric video requires recovering the surrounding scene and the wearer's full-body motion in a shared metric frame. Existing methods typically address scene reconstruction and motion estimation separately: scene reconstruction methods ignore the wearer, whereas motion estimation methods lack explicit scene geometry and often depend on external trajectories. Joint recovery is challenging because the two tasks exhibit asymmetric visibility and require different prediction paradigms. The largely visible scene supports deterministic geometric regression, whereas the severely occluded body requires generative motion inference. We therefore propose RESELF (REconstructing the Scene and the sELF), a unified framework that couples deterministic metric geometry reconstruction with geometry-conditioned motion generation. RESELF adapts a geometry foundation model pre-trained on large-scale exocentric data to egocentric video using frame-wise scale and relative-pose consistency objectives. The resulting camera trajectory and latent geometric features condition a diffusion model that recovers the wearer's motion. A subsequent closed-loop kinematic feedback stage further refines the camera head while preserving the reconstructed scene geometry. To support training and evaluation, we curate EE4D-JSM from EgoExo4D by aligning egocentric video, sparse metric scene geometry, camera trajectories, and full-body motion annotations. Experiments show that RESELF outperforms state-of-the-art methods designed for the individual tasks across depth estimation, camera tracking, and full-body motion estimation. Code, models, and datasets will be available at https://ka1guan.github.io/RESELF/.

0.19

S$^2$GS: Structured Sparse Gaussian Streaming for Efficient Free-Viewpoint Video Reconstruction on Edge-IoT Devices

cs.CV ·2026-08-20 ·Yiwei Li, Jiannong Cao, Weixun Gao, Rui Cao, Songye Zhu +2 more
code/data similarity 0.61
Abstract · Project Page, Code, and Supplementary Material: https://github.com/liyw420/S2GS

Streaming reconstruction of Free-Viewpoint Videos (FVVs) supports immersive Internet of Things (IoT) services, such as telepresence and digital twin visualization. Existing methods suffer from high per-frame optimization time and large storage footprints, limiting deployment on resource-constrained Edge-IoT devices. To address these challenges, we propose Structured Sparse Gaussian Streaming (S$^2$GS), an FVV reconstruction framework that exploits structure-aware temporal sparsity to selectively update Gaussian residuals, enabling efficient streaming without compromising visual fidelity. In the spatial domain, a streaming octree hierarchically organizes Gaussian residuals, capturing spatial correlations that guide residual updates. In the temporal domain, a structured gating mechanism, comprising hierarchical feature propagation (HFP) and Gumbel-Sigmoid sampling, converts hierarchical dynamic cues into sparse residual update decisions under differentiable optimization. A multi-level discrete scheme is further adopted to provide fine-grained control over residual updates while preserving intricate dynamic details. Extensive experiments across consumer GPUs, industrial edge IoT devices, and a physical telepresence testbed demonstrate that S$^2$GS consistently reduces per-frame optimization time and storage footprint while maintaining competitive visual quality. Compared with QUEEN, S$^2$GS reduces per-frame optimization time by 59% and storage costs by 85% on an RTX 4090 GPU. On the Jetson AGX Orin, S$^2$GS delivers the highest rendering throughput (60+ FPS) and the lowest energy consumption among the evaluated methods, demonstrating its potential for deployment in resource-constrained systems.

0.31