CS Paper Radar

MuCHMDPoser: Multiview RGB-Camera Full-Body Pose Tracking for Virtual Reality

Antoine Maiorca, George Fletcher, Thierry Ravet, Thierry Dutoit

cs.CV ·submitted 2026-11-02 12:51 UTC · v1
code/data

Abstract

Accurate full-body tracking in Virtual Reality (VR) is heavily underconstrained when relying solely on consumer-grade sparse sensors, such as Head-Mounted Displays (HMDs) and handheld controllers. Indeed, the self-avatar full-body pose must be inferred based on the 3 available upper-body joints tracked by these devices. This leads to significant tracking error, especially in lower-body pose. To overcome this issue, we propose to extend the tracking setup with external multiview RGB cameras. We show that integrating RGB-based pose estimation this framework is able to significantly decrease lower-body tracking errors, even under common artifacts in RGB-based estimates. Additionally, we evaluate a only-once HMD-camera calibration procedure that does not require any physical markers. We finally propose an implementation of the overall framework, achieving an end-to-end animation at 60 FPS on a Nvidia RTX3080 GPU. Codes are available at https://github.com/antmaio/MuCHMDPoser.

Closest papers

Nearest neighbours by meaning across the whole index.

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.68
Abstract · 5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 202…

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

0.63

EgoWholeView: Camera-Only Head-Mounted Capture of Body and Bimanual Hand Motion for Embodied Demonstrations

cs.CV ·2026-10-12 ·Yaoqing Hu, Xuguo He, Daohan Cui, Yukun Shi, Kai Chen
benchmark similarity 0.67
Abstract · 17 pages, 9 figures

Head-mounted body and bimanual motion capture supports self-avatars, teleoperation, and embodied demonstrations. However, a single egocentric camera is vulnerable to a limited field of view, scale ambiguity, and hand-object occlusion. We present EgoWholeView, a wearable capture system of six synchronized wide-angle RGB cameras with a role-specialized pipeline. The outward views localize the rig in a world frame, while an overlapping downward pair independently predicts SMPL-X body and MANO hand parameters. Both predictors are adapted to egocentric fisheye data. To combine the two, reliability cues measured from the predictions themselves weight the fusion of body and hand joint rotations, while shape is aggregated across views and frames. The pair's baseline fixes metric scale, and triangulation recovers root translation. Relative to monocular prediction, fusion reduces PA-MPJPE by 3.7% for the body and 11.2% for the hands, and temporal refinement lowers angular-acceleration magnitude by 32.2% and 31.0%, respectively. On our six-camera recording, the pipeline produces body and hand states in a shared world frame using benchmark-fitted gates without retuning, and temporal refinement lowers hand acceleration magnitude by 41.08%. Using only RGB cameras and no third-person view, EgoWholeView offers a low-cost, portable route to egocentric interaction data.

0.35

MetricPose: Flexible 3D Human Pose Estimation with Depth and Geometric Cues

cs.CV ·2026-11-06 ·Shifan Zhu, Sabad Modi, Hang Yang, Arushi Agrawal, Steven Gao +3 more
published similarity 0.67
Abstract · 9 pages, 3 figures, ICRA submission

In this paper, we present a 3D human pose estimator that predicts metrically accurate human joint positions in the camera coordinate frame. This task requires recovering the configuration of the body joints, scale, and metric camera-local placement. In monocular images, body size and camera distance are coupled through perspective projection and therefore cannot be determined uniquely from image alone. This ambiguity can be reduced by combining three complementary sources of information: learned RGB priors, direct depth measurements, and geometric constraints (e.g., ground contact) from the environment. We extend a pretrained full-body estimator with optional metric depth and geometry-processing modules that improve camera-distance estimation and depth-guided body refinement while preserving RGB-only operation. The resulting unified model supports RGB, RGB-Ground, and RGB-D using shared learned parameters. Unlike pelvis-relative error, camera-local error also measures placement relative to the camera. Compared with the existing foundation model SAM 3D Body, our methods with RGB, RGB-Ground, and RGB-D modes reduce camera-local joint-position error by 12.16%, 31.00% and 54.61% respectively.

0.31

FlowAvatar: Real-Time Full-Body Avatars from Sparse Egocentric Inputs on Consumer XR Devices

cs.CV cs.HC ·2026-10-12 ·Chenfeng Gao, Taeyoung Yeon, Sungheon Park, Vasco Xu, Anish Prabhu +2 more
top venuebenchmarkcode/data similarity 0.66
Abstract · Accepted to IEEE ISMAR 2026 (Conference Track). 10 pages, 9 figures. Code: https://github.com/SPICExLAB/FlowAvatar

Prior avatar embodiment research has studied tracking completeness (how faithfully the body, hands, and face are sensed and reproduced) and personalized appearance in isolation, each requiring specialized lab equipment. How these factors interact on consumer hardware remains an open question, because no existing system unifies body pose, face, hands, and personalized appearance on a standalone headset. We present FlowAvatar, a system enabling real-time personalized look-alike avatars with full-body pose, hand articulation, facial expression, and eye gaze tracking from sparse egocentric inputs on consumer XR devices (Meta Quest Pro). Our pose model achieves competitive spatial accuracy and state-of-the-art temporal consistency on the AMASS benchmark against prior works with comprehensive spatial and temporal losses validated through architecture and loss ablations, while running in real-time. Two user studies (N=12, N=10) provide converging evidence that tracking completeness and personalized appearance serve complementary roles: tracking completeness broadly improves perceived motion quality, while only their combination achieves positive total embodiment.

0.62

Large-area Spatially Aligned Anchors

cs.MM cs.CV ·2026-10-22 ·Joni Vanherck, Brent Zoomers, Lode Jorissen, Isjtar Vandebroeck, Eric Joris +1 more
published similarity 0.65
Abstract · Accepted at XR Salento 2024

Extended Reality (XR) technologies, including Virtual Reality (VR) and Augmented Reality (AR), offer immersive experiences merging digital content with the real world. Achieving precise spatial tracking over large areas is a critical challenge in XR development. This paper addresses the drift issue, caused by small errors accumulating over time leading to a discrepancy between the real and virtual worlds. Tackling this issue is crucial for co-located XR experiences where virtual and physical elements interact seamlessly. Building upon the locally accurate spatial anchors, we propose a solution that extends this accuracy to larger areas by exploiting an external, drift-corrected tracking method as a ground truth. During the preparation stage, anchors are placed inside the headset and inside the external tracking method simultaneously, yielding 3D-3D correspondences. Both anchor clouds, and thus tracking methods, are aligned using a suitable cloud registration method during the operational stage. Our method enhances user comfort and mobility by leveraging the headset's built-in tracking capabilities during the operational stage, allowing standalone functionality. Additionally, this method can be used with any XR headset that supports spatial anchors and with any drift-free external tracking method. Empirical evaluation demonstrates the system's effectiveness in aligning virtual content with the real world and expanding the accurate tracking area. In addition, the alignment is evaluated by comparing the camera poses of both tracking methods. This approach may benefit a wide range of industries and applications, including manufacturing and construction, education, and entertainment.

0.41

Estimating Accurate Hand Pose in Camera Space with Vision Transformer

cs.CV cs.AIcs.GR ·2026-09-21 ·Kaiwen Ren, Yiran Jiang, Yongjing Ye, Shihong Xia
top venuecode/data similarity 0.64
Abstract

Monocular RGB-based hand pose estimation has emerged as a critical research frontier in computer vision. The local hand pose estimation methods predict hand poses relative to the wrist, while global hand pose estimation also requires estimating the wrist's position in the camera coordinate system. However, this camera-space estimation confronts two fundamental challenges: (1) depth ambiguity in monocular settings, and (2) the coupling effect of hand local poses and global wrist positions in the perspective projections. In particular, this coupling reflects that the projections are jointly determined by local hand poses, wrist positions, and camera intrinsics. To overcome these challenges, our framework proposes two key innovations: Transformation-Isomorphism Supervision for hand-depth information extraction and Perspective Information Embedding for resolving above coupling effect of local pose and wrist position, both integrated within the mainstream encoder-decoder architecture. Besides, we propose a novel framerate-aware multi-dataset training strategy for sequential pose refinement. Our fully integrated approach achieves at most 37.1\% superiority in CS-MJE over SOTA on HO3D. Project page: https://github.com/Mine268/CS-ViT.

0.59

BodyBridge: Grounded Body Layers for Sim-to-Real Translation of Vulnerable Road Users

cs.CV ·2026-10-17 ·Mark Azer, Fabian B. Flohr
publishedcode/data similarity 0.64
Abstract · Accepted to WACV 2027

Simulation-to-real driving video diffusion models can translate photorealistic scenes, but they typically represent pedestrians and cyclists, vulnerable road users (VRUs), as generic object classes. This is insufficient for vulnerable road users whose safety-relevant appearance depends on articulated pose and identity. We present BodyBridge and Grounded Body Layers (GBL), a simulator-derived, pixel-aligned representation that combines scene geometry, canonical per-pixel body correspondence, and exact VRU masks. GBL provides explicit articulation to the video diffusion model, emphasizes VRU regions during control-branch post-training, and supports additive composition with scene-geometry control at inference. It also enables per-joint evaluation of generated VRUs and a failure taxonomy for identity errors. On CARLA-to-real translation, BodyBridge improves near-range PCK@0.5 by 22% over the released depth-conditioned baseline. Replacing normal-map body control with canonical correspondence reduces body flips by 18%, while composition reduces near-range facing flips by 27%. These results show that explicit body grounding complements scene-level control and improves pose-faithful VRU generation. All code, data, and model checkpoints will be made publicly available to support reproducible, pedestrian-aware autonomous driving research.

0.50

Impact of Patient Orientation in Single- and Multi-View Camera Environments for AI-based Rehabilitation Monitoring

cs.CV ·2026-09-28 ·Miriama Jánošová, Andreas Lang, Petra Budikova, Jan Sedmidubsky
dataset similarity 0.64
Abstract

Automated quality assessment of rehabilitation exercises relies heavily on accurate human pose estimation from video data. Although numerous RGB-based pose estimation methods have been proposed, the impact of camera placement on detecting clinically relevant movement errors remains insufficiently explored. To address this gap, we introduce REHAB26-ViewAngles, a dataset comprising correct and incorrect rehabilitation exercise executions captured from a wide range of camera angles. Furthermore, we propose a novel separability metric to quantify an algorithm's ability to distinguish between valid and faulty exercise repetitions. Using these tools, we analyze how various RGB-based pose-estimation strategies are suitable for exercise quality assessment under varying camera placements. In particular, we analyze single-camera 2D and 3D pose estimation and four multi-camera strategies: a combination of two orthogonal 2D views, 3D triangulation, weighted 3D fusion, and an AI-based pose-estimation transformer model specifically trained from two synchronized cameras. Our findings reveal that an optimally placed 2D camera can improve the separability by 16.9% over the commonly used 0° frontal view and frequently outperforms single-camera 3D estimation, while combining two views can further improve accuracy by up to 13.1%. These results offer practical guidance for deploying rehabilitation monitoring in both home and clinical settings.

0.09