CS Paper Radar

A Height-Constrained 2-Point Minimal Solver for Pose Estimation from Active LED Markers with Event Cameras

Runze Yuan, Alexander Kappler, Jun Zhang, Kuangyi Chen, Fabio Morbidi, Pascal Vasseur, Cédric Demonceaux, Friedrich Fraundorfer

cs.CV cs.RO ·submitted 2026-08-10 12:19 UTC · v1
published

Abstract

In many autonomous applications requiring real-time localization, active marker-based systems are preferred due to their low latency and ease of deployment compared to computationally demanding feature-based methods. Event~\mbox{cameras} offer high temporal resolution and minimal delay and are commonly used with active LED markers for robust real-time localization. Existing methods typically rely on Perspective-n-Point (PnP) solvers for pose estimation. However, structured marker layouts can be challenging to deploy in space-constrained scenarios, while partial self-motion information (e.g., gravity direction and altitude) is readily available from onboard sensors. We derive a robust and accurate minimal solver that estimates camera pose from only two LED markers by incorporating known tilt angle and camera height measured by an onboard sensor, such as an IMU or an altimeter. The proposed formulation uniquely determines the camera pose through both a closed-form and a linear least-squares solution. We further analyze degenerate configurations and characterize the conditions under which height information does not contribute to rotation estimation. For evaluation, we developed an event-based active marker system to collect real-world data with ground truth from a motion capture system. Experiments on both synthetic and real data demonstrate improved accuracy over the state-of-the-art P2P solver and competitive performance relative to P3P.

Comment
8 pages, 6 figures, accepted by IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS (IROS) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Real-Time Event-Based LED Tracking and Pose Estimation with PWM-Encoded Markers

cs.RO ·2026-11-05 ·Junkai Niu, Sheng Zhong, Delei Kong, Xin Wang, Kaizhen Sun +3 more
similarity 0.70
Abstract · This work has been submitted to the IEEE for possible publication

Event cameras are neuromorphic vision sensors with pixels that independently and asynchronously respond to brightness changes at microsecond resolution, supporting state estimation under rapid motion, motion blur, and high dynamic range (HDR) illumination. This also enables capture of high-frequency blinking patterns from light-emitting diodes (LEDs). Based on this, we propose a real-time event-based framework for LED tracking and six-degree-of-freedom (6-DoF) relative pose estimation using pulse-width modulation (PWM)-encoded LED markers. Multiple LEDs share a common blinking frequency and encode identities through distinct PWM duty cycles, reducing frequency-resource requirements and computational cost. Our dual-rate asynchronous tracking framework combines low-rate LED detection with high-rate raw-event updates, maintaining robust LED identity association and accurate pixel-level tracking under rapid motion. LED identities and positions establish reliable 2D-3D correspondences for real-time metric 6-DoF relative pose estimation. Extensive evaluations on a self-collected dataset demonstrate robustness under large motion flow and transient image-plane LED overlap. Furthermore, we develop a coordinated robotic platform comprising a quadrotor and a Mecanum-wheeled mobile robot, demonstrating the proposed framework's potential for closed-loop drone guidance through hovering and target-following experiments under time-varying HDR illumination, with onboard deployment on an NVIDIA Jetson Orin NX. The dataset and implementation will be released to facilitate further research.

0.36

AMR-Pose: An Active LED Marker-Based Relative Pose Estimation Framework With Probabilistic Switching PnP for Cooperative AUVs

cs.RO ·2026-08-13 ·Zeyu Sha, Xiaorui Wang, Mingyang Yang, Feitian Zhang
similarity 0.68
Abstract

Reliable relative pose estimation between autonomous underwater vehicles (AUVs) is critical for cooperative ocean exploration, sampling, and multi-robot coordination. However, achieving robust vision-based relative localization in underwater environments remains challenging due to severe optical degradation, including turbidity, illumination variations, reflections, and intermittent feature occlusions. This paper presents AMR-Pose, an active LED marker-based relative pose estimation framework for cooperative AUVs. A compact marker module consisting of one red central LED and three blue peripheral LEDs is developed and integrated onto the leader AUV to provide distinctive visual features under complex underwater conditions. Building upon the detected marker observations, a probabilistic switching Perspective-n-Point estimator (PSwPnP) is developed by combining Lie-group pose propagation on $SE(3)$, probabilistic marker association, and visibility-adaptive measurement fusion for robust six-degree-of-freedom relative pose estimation. The proposed framework dynamically adapts the estimation process according to marker visibility, maintaining geometric consistency and temporal stability during partial observations and visibility transitions. Extensive water-tank experiments with motion-capture ground truth validate that AMR-Pose achieves accurate, smooth, and robust relative pose estimation under challenging underwater conditions. Closed-loop leader-follower experiments further demonstrate its feasibility for real-time relative pose feedback in cooperative underwater robotics.

0.34

3D Pose Estimation in Projection Space via Pixel-level Visible Light Communication

cs.RO ·2026-11-04 ·Michikuni Eguchi, Takefumi Hiraki
similarity 0.67
Abstract · submitted to IEEE Access

Projector-based augmented reality enables natural interaction between users and devices by overlaying digital information onto the physical world through projected imagery. A key technical requirement of such systems is accurate positional alignment between the projector and the devices. Pixel-level Visible Light Communication (PVLC) achieves this alignment without external sensing infrastructure by embedding invisible spatial codes into each projected pixel through high-speed brightness modulation that preserves image quality. However, the information that PVLC transmits is inherently planar. PVLC has therefore been limited to devices moving on a flat surface and cannot estimate the 3D pose of devices in three-dimensional space, such as aerial robots. To extend PVLC-based pose estimation to three dimensions, we formulate it as a Perspective-n-Point (PnP) problem. The 2D pixel positions that four coplanar photosensors on the device receive via PVLC serve as the image points, and their known 3D layout provides the object points. Experiments show that the proposed system estimates 3D pose with a latency of approximately 8~ms and a 3D position RMSE of 19.2~mm after Kalman filtering. These results confirm the first realization of real-time 3D pose estimation coordinated with high-quality projected image content without external sensing infrastructure.

0.18

TinyCVIO: A Constellation-Aided Visual-Inertial Odometry System for Nanodrones

cs.RO ·2026-09-24 ·Derin Ozturk, Kaan Akan, Irwin Wang, Christopher Batten
similarity 0.66
Abstract · 9 pages, 6 figures, 4 tables. Video: https://youtu.be/6hQNdIcjHJE

Nanodrones require accurate, real-time state estimation under severe sensing and computational constraints. We present TinyCVIO, a visual-inertial odometry system that co-designs miniature sensing, visual processing, and estimation for a commodity dual-core microcontroller with 520 kB SRAM. Lightweight LED constellations provide known geometry without surveyed positions or yaw angles, assuming placement on a common level plane. A streaming visual frontend tracks LED observations from a millimeter-scale camera at 29.2 FPS, while a rigid-board measurement model retains inter-LED constraints and streaming QR bounds estimation workspace for a fixed filter-state size. Across 19 hand-held hardware-in-the-loop datasets, the rigid-board model reduces mean absolute trajectory error by 27% relative to planar points. The complete system runs onboard a Crazyflie across nine flights at three speeds, achieving 3.5-3.7 cm mean absolute trajectory error and 0.50-0.60% relative pose error over 10 m segments, with mean estimate latency of 15.7-16.3 ms.

0.23

Gravity-aware partially calibrated absolute pose estimation from affine- or rotation-covariant features

cs.CV ·2026-08-20 ·Marcus Valtonen Örnhag, Alberto Jaenal, Stefan Adalbjörnsson
top venue similarity 0.65
Abstract · European Conference on Computer Vision 2026

Inertial measurement units (IMUs) are now standard in most consumer devices, such as smartphones, drones, and extended reality (XR) headsets. By fusing visual and inertial data, localization systems gain significantly in speed and robustness compared to vision-only or IMU-only approaches. However, traditional pose estimation methods fail to utilize the local geometric information embedded in feature descriptors like SIFT. Recent work has proved the advantages of leveraging this information for relative and absolute pose estimation, but its application to partially calibrated absolute pose estimation remains unexplored. In this paper, we derive novel constraints for joint estimation of absolute pose and focal length, making use of a gravity vector obtained from IMU data and the feature-induced local geometry, which we use to construct two efficient solvers: UP1PfAC, that operates given a single affine correspondence and UP2PfORI, which requires two orientation-covariant features. Unlike traditional, semi-calibrated absolute pose methods requiring four point correspondences, our solvers benefit from fewer samples and lower computational cost, simplifying robust estimation in modern RANSAC-like frameworks. We evaluate the proposed solvers against the state-of-the-art on large-scale public datasets and demonstrate that our method achieves fast and accurate localization and focal length estimation.

0.37

Fast Iterative Five point Relative Pose Estimation

cs.CV ·2026-08-13 ·Johan Hedborg, Michael Felsberg
highly cited similarity 0.64
Abstract

Robust estimation of the relative pose between two cameras is a fundamental part of Structure and Motion methods. For calibrated cameras, the five point method together with a robust estimator such as RANSAC gives the best result in most cases. The current state-of-the-art method for solving the relative pose problem from five points is due to Nister [9], because it is faster than other methods and in the RANSAC scheme one can improve precision by increasing the number of iterations. In this paper, we propose a new iterative method, which is based on Powell's Dog Leg algorithm. The new method has the same precision and is approximately twice as fast as Nister's algorithm. The proposed method is easily extended to more than five points while retaining a efficient error metrics. This makes it also very suitable as an refinement step. The proposed algorithm is systematically evaluated on three types of datasets with known ground truth.

0.61

Can a Display Be Used for Rapid LiDAR-Camera Extrinsic Calibration?

cs.CV ·2026-10-20 ·Zuhao Zou, Xiangcheng Hu, Jianhao Jiao, Jin Wu
benchmarkcode/data similarity 0.63
Abstract

ScreenCalib enables light detection and ranging (LiDAR)--camera extrinsic calibration using an ordinary programmable display, providing known visual markers and controlled geometry while reducing dedicated target preparation. The camera observes displayed AprilTags, whereas the LiDAR measures the physical screen surface and boundary, requiring indirect cross-modal association. Display geometry introduces association ambiguities, while indoor clutter complicates extraction. ScreenCalib addresses these challenges through tag-guided display extraction, geometric hypothesis generation and refinement, and surrounding scene edges for ambiguity resolution. The single-pose mode requires only one static placement. The joint multi-pose mode combines independent static observations through cross-pose consensus and jointly refines the shared extrinsics and tag scale, reducing sensitivity to tag-size measurement errors without requiring continuous motion or inter-pose trajectory estimation. Experiments in simulation and on three different sensor platforms cover mechanical and nonrepetitive LiDARs in clean and cluttered environments. Benchmark results show that ScreenCalib outperforms competitive calibration-board-based methods in translation accuracy. Joint multi-pose refinement further reduces mean rotation and translation errors across the three platforms and improves rendered-map alignment. Evaluation across readily available displays, including cell phones, tablets, laptops, computer monitors, and televisions, further examines ScreenCalib's versatility as a practical alternative to dedicated calibration targets. The source code is available at https://github.com/ZuhaoZou2026/ScreenCalib.

0.23

Robust Validation to Geometric Perturbations for Autonomous Pose Estimation

cs.CV ·2026-08-21 ·Gregoire Theau, Melanie Ducoffe
position similarity 0.63
Abstract · 15 pages, 7 figures

Deploying autonomous systems in safety-critical domains demands guaranteed robustness against physically plausible geometric perturbations rather than abstract pixel-wise noise. In vision-based navigation and autonomous landing, machine learning components require rigorous validation under dynamic operational conditions such as camera rotations and lighting shifts. Extending findings on the failure of first-order spatial attacks in classification, we show that standard gradient-based heuristics (e.g. APGD) similarly fail on for pose estimation, often performing worse than a simple random sampling baseline. To overcome these optimization bottlenecks, we reformulate pose estimation robustness within the framework of Global Lipschitzian Optimization (GLO). We argue that GLO offers a principled approach to robust validation, effectively localizing global optima with strong theoretical convergence guarantees. We evaluate this framework on a YOLOv8-Pose keypoint detector with a Perspective-n-Point (PnP) solver against rotation and contrast. In our evaluations, GLO successfully isolates critical failure modes where position deviations exceed safe operational limits, while rapidly pruning the search space by over 80%. To the best of our knowledge, this is the first study to extend geometric robustness validation to continuous keypoint regression and deep object detection, establishing a practical step toward certifying robust autonomous perception.

0.31