CS Paper Radar

Fast Iterative Five point Relative Pose Estimation

Johan Hedborg, Michael Felsberg

cs.CV ·submitted 2026-08-13 11:41 UTC · v1
highly cited

Abstract

Robust estimation of the relative pose between two cameras is a fundamental part of Structure and Motion methods. For calibrated cameras, the five point method together with a robust estimator such as RANSAC gives the best result in most cases. The current state-of-the-art method for solving the relative pose problem from five points is due to Nister [9], because it is faster than other methods and in the RANSAC scheme one can improve precision by increasing the number of iterations. In this paper, we propose a new iterative method, which is based on Powell's Dog Leg algorithm. The new method has the same precision and is approximately twice as fast as Nister's algorithm. The proposed method is easily extended to more than five points while retaining a efficient error metrics. This makes it also very suitable as an refinement step. The proposed algorithm is systematically evaluated on three types of datasets with known ground truth.

Journal ref
IEEE Workshop on Robot Vision (WoRV 2013), January 15-17, 2013, Clearwater, FL, USA
DOI
10.1109/WORV.2013.6521915

Closest papers

Nearest neighbours by meaning across the whole index.

Object Pose: The Link between Weak Perspective, Paraperspective, and Full Perspective

cs.CV cs.RO ·2026-11-18 ·Radu Horaud, Fadi Dornaika, Bart Lamiroy, Stephane Christy
top venue similarity 0.69
Abstract

Recently, DeMenthon and Davis [4,5] proposed a method for determining the pose of a 3-D object with respect to a camera from 3-D to 2-D point correspondences. The method consists of iteratively improving the pose computed with a weak perspective camera model to converge, at the limit, to a pose estimation computed with a perspective camera model. In this paper we give an algebraic derivation of DeMenthon and Davis' method and we show that it belongs to a larger class of methods where the perspective camera model is approximated either at zero order (weak perspective) or first order (paraperspective). We describe in detail an iterative paraperspective pose computation method for both non coplanar and coplanar object points. We analyse the convergence of these methods and we conclude that the iterative paraperspective method (proposed in this paper) has better convergence properties than the iterative weak perspective method. We introduce a simple way of taking into account the orthogonality constraint associated with the rotation matrix. We analyse the sensitivity to camera calibration errors and we define the optimal experimental setup with respect to imprecise camera calibration. We compare the results obtained with this method and with a non-linear optimization method.

0.42

Camera-to-Quadruped Robot Pose Estimation from Sequential Images

cs.RO cs.CV ·2026-10-27 ·Seobin Hwang, Ji-Seong Beom, Yeong-Jun Cho
benchmark similarity 0.66
Abstract · 17 pages, 8 figures, 6 tables

Quadruped robots are increasingly deployed in hazardous environments such as disaster response and facility inspection, where external-camera monitoring is essential for safe operation. This setting is challenging because quadrupeds are articulated systems with time-varying leg joints, leg symmetry, and frequent self-occlusions, which make keypoint correspondence ambiguous. Moreover, no public benchmark exists, making quantitative comparison difficult. To address these challenges, we propose QuadPose, which estimates the full-body 18-DoF pose (6-DoF base pose + 12-DoF joint angles) from monocular video sequences, and introduce QuadSyn, the first camera-to-quadruped robot pose benchmark. On QuadSyn, QuadPose achieves 92.18% PCK@2.5px, 95.54% PCK-AUC, 85.94% ADD@20cm, 66.98% ADD-AUC, and 3.65 degree mean joint-angle error at approximately 33 FPS.

0.19

Object Pose from 2-D to 3-D Point and Line Correspondences

cs.CV ·2026-10-14 ·Thai Quynh Phong, Radu Horaud, Adnan Yassine, Pham Dinh Tao
top venuehighly cited similarity 0.66
Abstract

In this paper we present a method for optimally estimating the rotation and translation between a camera and a 3-D object from point and/or line correspondences. First we devise an error function and second we show how to minimize this error function. The quadratic nature of this function is made possible by representing rotation and translation with a dual number quaternion. We provide a detailed account of the computational aspects of a trust-region optimization method. This method compares favourably with Newton's method which has extensively been used to solve the problem at hand, with Faugeras-Toscani linear method [6] for calibrating a camera, and with the Levenberg-Marquardt non-linear optimization method. Finally we present some experimental results which demonstrate the robustness of our method with respect to image noise and matching errors.

0.58

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.65
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

A Height-Constrained 2-Point Minimal Solver for Pose Estimation from Active LED Markers with Event Cameras

cs.CV cs.RO ·2026-08-10 ·Runze Yuan, Alexander Kappler, Jun Zhang, Kuangyi Chen, Fabio Morbidi +3 more
published similarity 0.64
Abstract · 8 pages, 6 figures, accepted by IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS (IROS) 2026

In many autonomous applications requiring real-time localization, active marker-based systems are preferred due to their low latency and ease of deployment compared to computationally demanding feature-based methods. Event~\mbox{cameras} offer high temporal resolution and minimal delay and are commonly used with active LED markers for robust real-time localization. Existing methods typically rely on Perspective-n-Point (PnP) solvers for pose estimation. However, structured marker layouts can be challenging to deploy in space-constrained scenarios, while partial self-motion information (e.g., gravity direction and altitude) is readily available from onboard sensors. We derive a robust and accurate minimal solver that estimates camera pose from only two LED markers by incorporating known tilt angle and camera height measured by an onboard sensor, such as an IMU or an altimeter. The proposed formulation uniquely determines the camera pose through both a closed-form and a linear least-squares solution. We further analyze degenerate configurations and characterize the conditions under which height information does not contribute to rotation estimation. For evaluation, we developed an event-based active marker system to collect real-world data with ground truth from a motion capture system. Experiments on both synthetic and real data demonstrate improved accuracy over the state-of-the-art P2P solver and competitive performance relative to P3P.

0.33

Correspondence-Free Camera Pose Estimation by Matching Moments

cs.CV cs.LGcs.ROeess.IV+1 ·2026-11-16 ·Subhransu S. Bhattacharjee, Dylan Campbell, Rahul Shome
similarity 0.63
Abstract · 65 pages, including references and appendices; under review

The blind perspective-$n$-point (PnP) problem is to estimate the pose of a calibrated camera from 2D and 3D point sets with unknown correspondences. We show that, for complete, noiseless observations, fourteen permutation-invariant image moments up to order four identify a fixed camera pose for almost every 3D point set containing at least twenty points. Our learning-free method, MomentPnP, matches these moments between the observed 2D points and the projected 3D points to initialize a camera pose without correspondences and refines the pose and correspondence weights using expectation--maximization. Across the test sets of three benchmarks, our method reduces median rotation error by $5$--$170\times$ relative to the best learned baseline, both with and without outliers. We recover accurate poses even with as many outliers as inliers. On dense ETH3D scans, pose accuracy improves as the point sets grow, even as individual correspondences become harder to resolve.

0.25

Impact of Patient Orientation in Single- and Multi-View Camera Environments for AI-based Rehabilitation Monitoring

cs.CV ·2026-09-28 ·Miriama Jánošová, Andreas Lang, Petra Budikova, Jan Sedmidubsky
dataset similarity 0.62
Abstract

Automated quality assessment of rehabilitation exercises relies heavily on accurate human pose estimation from video data. Although numerous RGB-based pose estimation methods have been proposed, the impact of camera placement on detecting clinically relevant movement errors remains insufficiently explored. To address this gap, we introduce REHAB26-ViewAngles, a dataset comprising correct and incorrect rehabilitation exercise executions captured from a wide range of camera angles. Furthermore, we propose a novel separability metric to quantify an algorithm's ability to distinguish between valid and faulty exercise repetitions. Using these tools, we analyze how various RGB-based pose-estimation strategies are suitable for exercise quality assessment under varying camera placements. In particular, we analyze single-camera 2D and 3D pose estimation and four multi-camera strategies: a combination of two orthogonal 2D views, 3D triangulation, weighted 3D fusion, and an AI-based pose-estimation transformer model specifically trained from two synchronized cameras. Our findings reveal that an optimally placed 2D camera can improve the separability by 16.9% over the commonly used 0° frontal view and frequently outperforms single-camera 3D estimation, while combining two views can further improve accuracy by up to 13.1%. These results offer practical guidance for deploying rehabilitation monitoring in both home and clinical settings.

0.09

Spectral Consistency-Guided Multiview Point Cloud Registration for Low-Overlap Scenes

cs.CV ·2026-09-11 ·Tianyu Li, Yanghong Lin, Shudong Zhou, Kui Yang, Jingru Zhang +2 more
code/data similarity 0.62
Abstract

Multiview point cloud registration is particularly challenging in low-overlap scenes, where reliable correspondences are limited and incorrect pairwise transformations can affect global pose estimation. In addition, registering all scan pairs is computationally expensive because many pairs provide weak geometric information. To address these problems, we propose GMPCR, a non-learning-based spectral consistency-guided framework for efficient and robust multiview point cloud registration. GMPCR builds a refined second-order compatibility structure from initial correspondences and uses its dominant spectral response to evaluate both correspondence reliability and scan-pair confidence. This allows unreliable correspondences to be filtered and informative scan pairs to be selected before relative transformation estimation, leading to a sparse pose graph and reduced pairwise registration cost. For each retained scan pair, maximal-clique-based hypothesis generation is used to estimate reliable relative transformations. The resulting pose graph is further refined by an adaptive history-aware synchronization scheme, in which the effect of residual history is adjusted according to changes in the global rotation residual. A recovery mechanism also allows down-weighted edges to regain confidence when their global consistency improves. Experiments on 3DMatch, 3DLoMatch, ScanNet, and ETH demonstrate the effectiveness of GMPCR. It achieves registration recalls of 97.2% and 89.6% on 3DMatch and 3DLoMatch, respectively, while maintaining competitive performance on ScanNet and ETH. The results show that GMPCR provides a favorable balance among registration accuracy, robustness to low overlap, and computational efficiency. The code is publicly available at https://github.com/swccj/gmpcr.

0.31