CS Paper Radar

Camera-to-Quadruped Robot Pose Estimation from Sequential Images

Seobin Hwang, Ji-Seong Beom, Yeong-Jun Cho

cs.RO cs.CV ·submitted 2026-10-27 03:59 UTC · v1
benchmark

Abstract

Quadruped robots are increasingly deployed in hazardous environments such as disaster response and facility inspection, where external-camera monitoring is essential for safe operation. This setting is challenging because quadrupeds are articulated systems with time-varying leg joints, leg symmetry, and frequent self-occlusions, which make keypoint correspondence ambiguous. Moreover, no public benchmark exists, making quantitative comparison difficult. To address these challenges, we propose QuadPose, which estimates the full-body 18-DoF pose (6-DoF base pose + 12-DoF joint angles) from monocular video sequences, and introduce QuadSyn, the first camera-to-quadruped robot pose benchmark. On QuadSyn, QuadPose achieves 92.18% PCK@2.5px, 95.54% PCK-AUC, 85.94% ADD@20cm, 66.98% ADD-AUC, and 3.65 degree mean joint-angle error at approximately 33 FPS.

Comment
17 pages, 8 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Fast Iterative Five point Relative Pose Estimation

cs.CV ·2026-08-13 ·Johan Hedborg, Michael Felsberg
highly cited similarity 0.66
Abstract

Robust estimation of the relative pose between two cameras is a fundamental part of Structure and Motion methods. For calibrated cameras, the five point method together with a robust estimator such as RANSAC gives the best result in most cases. The current state-of-the-art method for solving the relative pose problem from five points is due to Nister [9], because it is faster than other methods and in the RANSAC scheme one can improve precision by increasing the number of iterations. In this paper, we propose a new iterative method, which is based on Powell's Dog Leg algorithm. The new method has the same precision and is approximately twice as fast as Nister's algorithm. The proposed method is easily extended to more than five points while retaining a efficient error metrics. This makes it also very suitable as an refinement step. The proposed algorithm is systematically evaluated on three types of datasets with known ground truth.

0.61

Towards Quadruped-Provided Localization and Active Tracking for Micro-UAVs

cs.RO ·2026-10-05 ·Alejandro Lorite Mora, Andrés Faíña
published similarity 0.64
Abstract · 12 pages, 5 figures. Submitted version (before peer review) of a paper accepted at CLAWAR 2026, Cranfield, UK, 14 to 16 September 2026. The …

Micro unmanned aerial vehicles (micro-UAVs) are small enough to reach confined spaces that larger robots cannot access, but too small to carry the sensing and computing power required for autonomous flight. We move the localization stack entirely off the aerial platform onto a quadruped robot with a 7-degree-of-freedom (DOF) arm, which supplies the micro-UAV (27 g bare, 42 g with fiducial markers) its full 6-DOF pose. A camera at the arm's end-effector detects AprilTag fiducial markers on the drone and composes that observation with the quadruped's own self-localization to place the drone in a shared map frame, so the ground robot localizes its partner, rather than only tracking it relative to the camera. The arm acts as an actively-controlled observer, repositioning to keep the drone in view as both robots move; the drone carries only an inertial measurement unit and fuses the external pose to fly commanded setpoints. In lab flights the external pose is accurate to 12-16 mm, enough to fly the drone autonomously within 2-5 cm of motion-capture-fed control. Having the quadruped actively follow the drone reduces the tracking error from 11.0 cm to 6.9 cm by holding the camera in the close range, where the markers are most accurate.

0.66

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.63
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

CopyQuad: Quadrupedal Skill Transfer from a Single Side-View Video Without a Depth Model

cs.RO cs.LG ·2026-10-12 ·Mohamad H. Danesh, Raina Hu, Mengxue Xu, Hsiu-Chin Lin
similarity 0.63
Abstract

Video-to-robot pipelines for quadrupedal imitation insert a learned lifting stage, either a monocular depth model or a per-clip 3D reconstruction, to recover the one axis a side-view camera cannot see. We present CopyQuad, which omits that stage and pins the missing axis to the robot's own stance width instead. The setting is side-view footage of sagittally dominated motion, where limb motion is almost entirely in the image plane. A frozen 2D keypoint detector and a fixed analytic retargeting then turn a single uncalibrated clip into a robot reference whose foot targets are reachable by construction, so no per-clip trajectory optimization is needed. One phase-indexed reward structure, whose only per-behavior freedom is three scalars from a shared sweep, learns a dog walk, a horse walk, a horse trot and two non-periodic gestures, all deployed zero-shot on hardware. We then measure what omitting the axis costs. In a training-free rigidity test, a video depth model varies the distance between the animal's hips by $40$ to $107\%$ of its own mean and a single-image metric model by $22$ to $58\%$, though that distance cannot move. Motion capture puts the true lateral paw travel of a dog walk at $4.5$ cm peak to peak, a mean deviation near $1.4$ cm against the $3.5$ cm of lateral foot error our policies already leave, so the discarded axis sits below the pipeline's resolution. Depth repaired to feasibility never beats the constant, and the unrepaired estimates put the robot on the ground.

0.15

IMU-Free Body-Frame State Estimation with Sparse Scene Flow for Quadcopters

cs.RO cs.CV ·2026-08-21 ·Daniel Grønhaug, Sofie Markeset, Mathias Kolberg
similarity 0.60
Abstract · 56 pages, 5 figures, 2 tables. Evaluated on the VID dataset (arXiv:2103.11152)

We present a vision-only state estimation system for X-configuration quadcopters equipped with a canonical stereo camera pair and no inertial sensors. The system operates entirely in the body frame, requiring only synchronised stereo images and motor thrust commands. A continuous-discrete extended Kalman filter on a composite manifold state $\langle SE(3), \mathbb{R}^3, \ldots \rangle$ maintains estimates of body-frame pose, velocity, angular velocity, gravity, and disturbances, using stationary scene points as implicit inertial references. Feature points are detected (FAST, Shi-Tomasi), tracked temporally (SSD, Lucas-Kanade) and matched across cameras (NCC), with search regions predicted from filter-derived pose and point uncertainty. Chi-squared gating on the normalised innovation admits only stationary points to the filter. The system also produces a sparse 3D point cloud carrying per-point position, velocity and joint covariance. These come from a 4-view (two stereo pairs at two timestamps) full bundle adjustment that jointly estimates position and velocity from stereo disparity and temporal parallax, with the filter-derived relative pose as a prior. Feature points in the EKF do not enter the solver; their information is reflected through the pose prior. Point cloud density is spatially adaptive: an external focus point directs allocation, producing dense coverage in the region of attention and sparse coverage elsewhere. The output is a body-frame state estimate, a calibrated pose change, and a sparse scene flow. It is intended as a measurement source for a downstream world model anchored in the current body frame, without dependence on GPS, IMU, or any world-frame infrastructure, though the architecture accommodates their future integration.

0.28

AnchorHEC: Targetless Hand-Eye Calibration of Wrist and Fixed Cameras

cs.RO ·2026-11-02 ·Guebin Hwang, Taeyeop Lee, Yeonseo Lee, Hyosup Shin, Sungho Jo
code/data similarity 0.60
Abstract · 8 pages, 5 figures, 5 tables. Project page: https://hwanggb.github.io/AnchorHEC/

Recent robot systems combine wrist and fixed cameras, requiring camera-to-robot transforms for both. Most hand-eye calibration methods rely on targets or robot-body observations. Scene-based methods using 3D reconstruction require neither but address only wrist cameras. We introduce AnchorHEC, a targetless hand-eye calibration framework for wrist and fixed cameras in a single procedure using RGB images, forward kinematics (FK), and known camera intrinsics. We initialize both camera types using FK and a shared 3D foundation model reconstruction. FK-constrained wrist-image bundle adjustment reduces the impact of reconstructed pose and scale errors. If this refinement fails or retains too few inliers, we relax the constraints on potentially inaccurate FK poses and lens parameters. We use the refined wrist transform and FK to triangulate metric points and estimate fixed-camera poses. Across three backbones, calibration errors in simulation decrease by 86.4% in translation and 71.6% in rotation, averaged over both camera types, relative to reconstruction-based baselines. We also validate AnchorHEC on a physical robot. Project page: https://hwanggb.github.io/AnchorHEC/

0.34

STA-TFM: Spatio-Temporal Aggregation Across Views TransForMer for Pose Estimation

cs.CV ·2026-09-21 ·Mena Kamel, Natalie Won, Amrut Sarangi, Sven Jager, Albert Pla Planas
publishedcode/data similarity 0.60
Abstract

Monocular 3D human pose estimation (HPE) remains challenging due to depth ambiguity, occlu- sions, and the need for temporal consistency. While multi-view methods provide superior accuracy over monocular approaches, they often require complex setups. We introduce STA-TFM, a transformer-based architecture that combines spatial and temporal information for multi-view pose estimation. The approach leverages DSTformer, a monocular feature extractor, to capture long-range pose dependencies within each view. A fusion transformer then aggregates information across views to produce coherent 3D estimates. To address training data scarcity, we use a data generation pipeline that transforms any existing 3D pose dataset into multi-view setups with controllable parameters. Experiments on various datasets demonstrate that STA-TFM outperforms existing camera-parameter-free multi-view methods. STA-TFM achieves 50.9% and 49.5% reductions in mean per joint position error (MPJPE) and mean per joint velocity error (MPJVE) on the DHP19 dataset. Furthermore, it achieves 6.7% and 7.7% respective reductions on HAA4D, and a 15.2% MPJPE reduction on TotalCapture. STA-TFM handles noisy and missing 2D inputs, supporting potential deployment in healthcare monitoring, athletic assessment, and immersive technologies. Code, training checkpoints, and data are available at https://zenodo.org/records/22832620.

0.37

Correspondence-Free Camera Pose Estimation by Matching Moments

cs.CV cs.LGcs.ROeess.IV+1 ·2026-11-16 ·Subhransu S. Bhattacharjee, Dylan Campbell, Rahul Shome
similarity 0.59
Abstract · 65 pages, including references and appendices; under review

The blind perspective-$n$-point (PnP) problem is to estimate the pose of a calibrated camera from 2D and 3D point sets with unknown correspondences. We show that, for complete, noiseless observations, fourteen permutation-invariant image moments up to order four identify a fixed camera pose for almost every 3D point set containing at least twenty points. Our learning-free method, MomentPnP, matches these moments between the observed 2D points and the projected 3D points to initialize a camera pose without correspondences and refines the pose and correspondence weights using expectation--maximization. Across the test sets of three benchmarks, our method reduces median rotation error by $5$--$170\times$ relative to the best learned baseline, both with and without outliers. We recover accurate poses even with as many outliers as inliers. On dense ETH3D scans, pose accuracy improves as the point sets grow, even as individual correspondences become harder to resolve.

0.26