CS Paper Radar

Correspondence-Free Camera Pose Estimation by Matching Moments

Subhransu S. Bhattacharjee, Dylan Campbell, Rahul Shome

cs.CV cs.LGcs.ROeess.IVmath.OC ·submitted 2026-11-16 09:44 UTC · v1

Abstract

The blind perspective-$n$-point (PnP) problem is to estimate the pose of a calibrated camera from 2D and 3D point sets with unknown correspondences. We show that, for complete, noiseless observations, fourteen permutation-invariant image moments up to order four identify a fixed camera pose for almost every 3D point set containing at least twenty points. Our learning-free method, MomentPnP, matches these moments between the observed 2D points and the projected 3D points to initialize a camera pose without correspondences and refines the pose and correspondence weights using expectation--maximization. Across the test sets of three benchmarks, our method reduces median rotation error by $5$--$170\times$ relative to the best learned baseline, both with and without outliers. We recover accurate poses even with as many outliers as inliers. On dense ETH3D scans, pose accuracy improves as the point sets grow, even as individual correspondences become harder to resolve.

Comment
65 pages, including references and appendices; under review

Closest papers

Nearest neighbours by meaning across the whole index.

Spectral Consistency-Guided Multiview Point Cloud Registration for Low-Overlap Scenes

cs.CV ·2026-09-11 ·Tianyu Li, Yanghong Lin, Shudong Zhou, Kui Yang, Jingru Zhang +2 more
code/data similarity 0.71
Abstract

Multiview point cloud registration is particularly challenging in low-overlap scenes, where reliable correspondences are limited and incorrect pairwise transformations can affect global pose estimation. In addition, registering all scan pairs is computationally expensive because many pairs provide weak geometric information. To address these problems, we propose GMPCR, a non-learning-based spectral consistency-guided framework for efficient and robust multiview point cloud registration. GMPCR builds a refined second-order compatibility structure from initial correspondences and uses its dominant spectral response to evaluate both correspondence reliability and scan-pair confidence. This allows unreliable correspondences to be filtered and informative scan pairs to be selected before relative transformation estimation, leading to a sparse pose graph and reduced pairwise registration cost. For each retained scan pair, maximal-clique-based hypothesis generation is used to estimate reliable relative transformations. The resulting pose graph is further refined by an adaptive history-aware synchronization scheme, in which the effect of residual history is adjusted according to changes in the global rotation residual. A recovery mechanism also allows down-weighted edges to regain confidence when their global consistency improves. Experiments on 3DMatch, 3DLoMatch, ScanNet, and ETH demonstrate the effectiveness of GMPCR. It achieves registration recalls of 97.2% and 89.6% on 3DMatch and 3DLoMatch, respectively, while maintaining competitive performance on ScanNet and ETH. The results show that GMPCR provides a favorable balance among registration accuracy, robustness to low overlap, and computational efficiency. The code is publicly available at https://github.com/swccj/gmpcr.

0.31

Efficient and Robust Camera-independent Multiview 3D Geometric Reconstruction from Noisy Monocular Depth Estimation and Multiple Point Matching

cs.CV ·2026-09-05 ·Marius Leordeanu
similarity 0.70
Abstract · 12 pages

We present an efficient and robust method for 3D geometric reconstruction that is based solely on the camera-independent linear relationships among a given set of points, which are stable over time and robustly estimated using multiple point matches. We essentially learn, from correspondences between points across several frames, a linear geometric auto-regression matrix $\mathbf{W}$, which establishes how a point in 3D can be expressed as a linear combination of all the others. This matrix is constant and does not depend on the world coordinate system or the camera pose---it is an intrinsic property of the point set. We also show that the principal eigenvectors of $\mathbf{W}$, which all have eigenvalue $1$, provide a homogeneous representation of the 3D point configuration. The first version of our method takes advantage of noisy monocular depth maps in order to obtain, from multiple frames, a robust geometric auto-regression matrix $\mathbf{W}$ of linear relationships between the 3D points. Thus, we build on recent advances in deep learning, which now provide monocular depth estimation models that are fast but very often noisy. Our approach handles noise through robust linear estimation over several frames. The second version of our method does not need monocular depth estimation maps. It applies in cases of weak-perspective projection, when the linear combinations between the 3D points can be robustly estimated from their 2D projections in the image. Note that the camera projection matrix is never used in our derivations. Consequently, our method does not recover camera pose, but only 3D structure. This is a key difference between our method and the related literature on 3D geometric reconstruction.

0.30

PnP-Transformer: A Neural Pose Solver for Zero-Shot 6D Object Pose Estimation

cs.CV ·2026-10-19 ·Emirkan Burak Yilmaz, Yakup Genc
publishedbenchmarkcode/data similarity 0.69
Abstract · Accepted to ECCV 2026 R6D Workshop

We present PnP-Transformer, a neural pose solver designed as an iterative-free, differentiable alternative to classical PnP-RANSAC algorithms. PnP-Transformer regresses the 6D object pose by processing predicted semi-dense 2D-3D correspondence fields alongside confidence scores, while mapping geometric inputs into a continuous latent space. To evaluate its practical utility, we integrate PnP-Transformer into a zero-shot 6D pose estimation pipeline, where the correspondence module and pose solver are trained separately. PnP-Transformer achieves a 41.2% mean AR score with low latency (0.46 s/obj) on seven core BOP benchmark datasets, surpassing all prior baselines (such as RayPose with 39.1% AR) but one (Co-op with 58.4% AR). When the pose solver is replaced with EPnP-RANSAC (similar to Co-op) while keeping the correspondence module unchanged, the RANSAC alternative outperforms PnP-Transformer on six of the seven datasets by reaching 52.2% mean AR at a cost of an additional 60 ms per object, revealing an accuracy-latency trade-off. Code and pretrained models are available at https://github.com/ebylmz/pnp-transformer.

0.34

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.69
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

Aligning Misaligned Benchmarks for Single-View Novel View Synthesis

cs.CV cs.AI ·2026-10-28 ·Yang-Che Tseng, Erqun Dong, Jeong-gi Kwak, Gopal Sharma, Shakiba Kheradmand +3 more
similarity 0.69
Abstract

While single-view novel view synthesis methods have been dramatically enhanced recently, how to quantify their performance has yet to be standardized. In this work, we demonstrate that an important factor lies in how each method's own reference frame is aligned with the so-called ground-truth pose. Existing methods often rely on test-time optimization of target poses for this alignment, which inherently is ill-posed due to the complexity of the optimization landscape of camera poses vs render accuracy, leading to methods being evaluated at an arbitrary local optimum. Some recognize this limitation and thus rely on 3D reconstructions of entire scenes using training and test views to align poses, which may be infeasible. In this work, instead, we propose to use traditional 2D-to-2D and 2D-to-3D image matching techniques to align 3D reconstructions. We also evaluate only within co-visible regions, between different views, which is the only place where a `correct' ground truth can be defined. Our evaluations show that with proper coordinate alignment, novel-view synthesis methods that use explicit 3D Gaussians achieve the state of the art, despite being previously reported in the literature to be outperformed by pure image-based 2D methods. We further provide a simple baseline that directly utilizes an off-the-shelf video generator and a feed-forward geometry estimator. Our simple baseline is already comparable to state-of-the-art methods specifically trained for novel-view synthesis, without any task-specific training.

0.18

Frame-Consistent Feed-Forward 3D Gaussian Splatting from Sparse Unposed Images

cs.CV ·2026-10-16 ·Viruthshaan Vinasirajan, Ranga Rodrigo
similarity 0.69
Abstract

Feed-forward Gaussian models have made novel view synthesis almost instantaneous. Feed-forward methods predict Gaussians directly, either in two stages or in a single merged pass. Using two separately trained models is attractive because each can specialize in its own objective: one for accurate pose estimation and the other for high-quality reconstruction, rather than forcing a single jointly trained network to compromise between the two. A natural instantiation pairs a frozen pose estimator, VGGT, with a frozen reconstruction backbone, TokenGS. Prior work, such as VGGT-X and 3R-GS, also adopts a two-stage design, but attributes the resulting quality degradation to noisy pose estimates and introduces learned refinement. We show that this is not the primary source of the problem. Through per-camera analysis across 107 scenes from two datasets, DL3DV and MipNeRF360, using COLMAP poses as the reference, we find that the rotation error after alignment is small (median 1.6 degrees), whereas the translation scale is offset by a large, dataset-consistent factor. Controlled ablations over 140 DL3DV scenes show that the primary obstacles are two integration failures rather than pose error: a coordinate-frame inconsistency and a translation-scale mismatch, both of which can be corrected deterministically. With these fixes, a frozen VGGT driving a frozen TokenGS achieves 22.47 PSNR, within 0.51 dB of the COLMAP reference, with no additional training, when poses are estimated from all scene views. In the sparse setting, where reconstruction uses only four context images under the standard pose-free protocol, the same pipeline matches this all-view quality, yielding a fully COLMAP-free pipeline without any refinement step.

0.11

Ex-Sim(3)-Reg: 2D-3D Correspondence Pruning via Extended Sim(3) Registration

cs.CV ·2026-08-28 ·Pei An, Muyao Peng, Junfeng Ding, Jiaqi Yang, Liangliang Nan
top venuecode/data similarity 0.68
Abstract · Accepted by ECCV 2026

Learning-based image-to-point-cloud (I2P) registration has garnered increasing attention in recent years. Nevertheless, existing methods still struggle with severe outliers under challenging scenarios with unseen, low-inlier, or distorted cases. A fast and robust 2D-3D correspondence pruning method is therefore highly desirable. Recently, a promising scheme lifts 2D-3D correspondences to 3D-3D correspondences using depth priors, casting correspondence pruning as a Sim(3) registration problem. However, depth priors estimated from monocular images are inherently noisy, which undermines the reliability of this scheme. In this paper, to explicitly model non-negligible depth noise, we reformulate correspondence pruning as an extended Sim(3) registration problem and propose a simple yet effective pruning algorithm termed Ex-Sim(3)-Reg. We further provide a theoretical analysis to justify the effectiveness of our method. Extensive experiments on the 7-Scenes, RGBD-V2, ScanNet, and TUM datasets demonstrate that Ex-Sim(3)-Reg achieves up to \textbf{24.7\% improvement} in registration recall over state-of-the-art baseline methods. Code is released at github.com/anpei96/ex-sim3-demo

0.67

Learning Which Correspondences to Trust: Confidence-Weighted Event-Camera Localization in LiDAR Maps

cs.CV cs.RO ·2026-10-08 ·Panagiotis Kiousis, Kuangyi Chen, Jun Zhang, Friedrich Fraundorfer
code/data similarity 0.68
Abstract · 8 pages, 8 figures/tables. Submitted to IEEE ICRA 2027 (under review). Code: https://github.com/panagiotisq/CELL

Localizing an event camera against a pre-built LiDAR map can be cast as dense optical-flow estimation between a rendered depth view and an event image, followed by a Perspective-n-Point (PnP) solver over the induced 3D-2D correspondences. Existing pipelines rely on geometric consensus during pose estimation, but do not explicitly model the reliability or pose informativeness, i.e., how strongly a correspondence constrains the camera pose, of individual correspondences. We show that the natural way to learn it -- using the per-correspondence error to constrain the learning of confidence -- suffers from a depth-dependent bias: small pixel errors reside predominantly at large depths and do not lead to high pose informativeness. Instead, in our method (CELL), we learn a per-correspondence confidence end-to-end through the pose, using a differentiable probabilistic PnP whose log-partition term encourages weight configurations that yield a better-constrained pose distribution. The learned confidence is used in three ways: (i) it reweights the flow supervision in a decoupled training scheme that keeps pose gradients out of the flow/edge backbone; (ii) it drives a probabilistic correspondence selection at test time; and (iii) together with the network's edge-probability it weights a final edge-matching refinement. We further design a partial-completion depth representation that adds signal without hallucinating across large gaps. On M3ED and DSEC our full system improves over the LEAR baseline on the majority of the evaluated sequences: it reduces the median translation error by up to 26.9% and the median rotation error by up to 15.8%.

0.28