CS Paper Radar

Ex-Sim(3)-Reg: 2D-3D Correspondence Pruning via Extended Sim(3) Registration

Pei An, Muyao Peng, Junfeng Ding, Jiaqi Yang, Liangliang Nan

cs.CV ·submitted 2026-08-28 09:02 UTC · v1
top venuecode/data

Abstract

Learning-based image-to-point-cloud (I2P) registration has garnered increasing attention in recent years. Nevertheless, existing methods still struggle with severe outliers under challenging scenarios with unseen, low-inlier, or distorted cases. A fast and robust 2D-3D correspondence pruning method is therefore highly desirable. Recently, a promising scheme lifts 2D-3D correspondences to 3D-3D correspondences using depth priors, casting correspondence pruning as a Sim(3) registration problem. However, depth priors estimated from monocular images are inherently noisy, which undermines the reliability of this scheme. In this paper, to explicitly model non-negligible depth noise, we reformulate correspondence pruning as an extended Sim(3) registration problem and propose a simple yet effective pruning algorithm termed Ex-Sim(3)-Reg. We further provide a theoretical analysis to justify the effectiveness of our method. Extensive experiments on the 7-Scenes, RGBD-V2, ScanNet, and TUM datasets demonstrate that Ex-Sim(3)-Reg achieves up to \textbf{24.7\% improvement} in registration recall over state-of-the-art baseline methods. Code is released at github.com/anpei96/ex-sim3-demo

Comment
Accepted by ECCV 2026

Closest papers

Nearest neighbours by meaning across the whole index.

SparseGraph-I2P: Consistency-Guided Hypothesis Selection for Efficient Image-to-Point-Cloud Registration

cs.CV cs.MM ·2026-11-03 ·Ziyang Yu, Xiang Li, Qiong Chang, Jun Miyazaki
similarity 0.77
Abstract · 20 pages

Coarse-to-fine image-to-point-cloud (I2P) registration risks discarding correct but ambiguous patch pairs, while retaining more candidates repeats fine matching over overlapping patches. SparseGraph-I2P aims to improve registration recall by increasing the inlier ratio at the pose solver, using sensor or monocular depth. A Coarse Hypothesis Graph combines appearance with depth-derived first- and second-order compatibility to select a fixed budget of patch pairs. Sparse Fine Matching decodes each queried pixel once and skips pixel--point comparisons covered by an ancestor patch paired with the same point-cloud region. With sensor depth, depth-aware filtering ranks correspondences by SC2 spectral support for a single EPnP solve. With monocular depth, depth or inverse depth is calibrated from correspondence geometry before filtering. SparseGraph-I2P achieves the highest registration recall and lowest latency among the compared methods on RGB-D Scenes V2 and 7-Scenes with sensor depth. With predicted depth, it retains the highest recall on RGB-D Scenes V2 at an additional calibration cost. Code will be released.

0.28

DPA-I2P: Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration in Autonomous Driving

cs.CV ·2026-08-27 ·Wenxin Zhang, Hang Li, Zhiwei Xu, Qiankun Dong, Gang Wang +1 more
similarity 0.73
Abstract

Image-to-Point Cloud Registration aims to estimate the camera pose of a given image within a 3D scene point cloud, which is a fundamental task in autonomous driving and large-scale outdoor localization. Recent implicit correspondence learning methods have improved registration performance by learning cross-modal alignment in an end-to-end framework, leading to more accurate camera pose estimation. However, due to the inherent modality discrepancy between images and sparse LiDAR point clouds, reliable cross-modal correspondence learning remains challenging. To address this issue, we propose Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration (DPA-I2P). Unlike naive depth or feature concatenation, Ray-Conditioned Metric Depth Encoding (RMDE) and Projection-Consistent Vision Lifting (PVL) exploit depth and visual cues in a structured, geometry-aware manner. In addition, Cross-Modal Query Pruning (CQP) suppresses unreliable queries during early refinement to improve matching stability. Experiments on KITTI and nuScenes demonstrate the effectiveness of the proposed method. On KITTI, DPA-I2P reduces RTE and RRE by 45.0% and 55.6% over the strongest implicit baseline, respectively. On nuScenes, DPA-I2P also improves registration accuracy over the evaluated baselines, suggesting better transferability to different driving scenes.

0.08

Robust Single-Parameter Point Cloud Registration using Truncated Lp Functions

cs.CV cs.RO ·2026-10-25 ·Seong Hun Lee, Patrick Vandewalle, Javier Civera
benchmark similarity 0.71
Abstract

We propose a novel method for robust point cloud registration with only one tunable parameter. Our method, dubbed TLP, uses truncated $L_p$ functions with different values of $p$ to assign priority scores to correspondences, select the hypothesis, and refine the final model. By leveraging the robustness of truncated functions, TLP effectively handles the high outlier rates commonly encountered in real-world 3D feature matching. We also exploit GPU parallelization to evaluate hypotheses efficiently, enabling registration from thousands of correspondences in under a second on average. With only one tunable parameter, our method offers greater practicality than multi-parameter methods that require dataset-specific tuning of several parameters. Evaluations on public benchmark datasets demonstrate that TLP achieves higher accuracy than state-of-the-art single-parameter methods. Furthermore, it outperforms two widely used multi-parameter methods on three of the four evaluated datasets while maintaining competitive runtime.

0.10

Mask 2D-3D: Adaptive Dual-Masked Autoencoder Network for Image-to-Point Cloud Registration

cs.CV cs.AI ·2026-09-16 ·Zhixin Cheng, Jiacheng Deng, Xiaotian Yin, Baoqun Yin, Richang Hong +1 more
top venue similarity 0.70
Abstract

Detection-free methods for image-to-point cloud registration are prone to erroneous correspondences caused by domain and modality discrepancies, limited sensitivity of feature extractors, and the presence of non-overlapping regions. The Masked Autoencoder (MAE) has shown strong performance in visual representation for images and point clouds. It may be helpful to apply this approach to image-to-point cloud registration, a task that requires unified feature extraction and accurate cross-modal correspondences. Standard MAE's random masking may overlook key regions due to limited camera views, reducing registration effectiveness. To address this, we propose the Intermodal Dual-MAE Framework (ID-MAE) with a Similarity-based RL Masking Strategy (SRLM), which adaptively masks informative positions by leveraging cross-modal similarity and reinforcement learning, thus narrowing the modality gap. Our method enhances cross-modal representation learning by enforcing representation consistency during feature extraction, thereby enabling more reliable 2D-3D correspondence estimation. Experiments on RGB-D Scenes v2 and 7-Scenes benchmarks show that our method achieves state-of-the-art performance in image-to-point cloud registration.

0.57

PARTE: Plane-Assisted Robust Transformation Estimation for Point Cloud Registration

cs.RO cs.CV ·2026-09-21 ·Abolfazl Babanazari, Carson Cramer, Tyler Summers, Carlos Nieto, Kaveh Fathian
code/data similarity 0.70
Abstract · 16 pages, 14 figures, 11 tables. Code: https://ariarobotics.github.io/parte/. Updated project website URL

Global point-cloud registration remains challenging when limited overlap, repetitive geometry, and sensor noise produce correspondence sets dominated by outliers. Planar regions are particularly difficult for conventional point descriptors and are therefore often suppressed or discarded before matching. We present PARTE (Plane-Assisted Robust Transformation Estimation), a global registration method that instead treats planar structure as complementary registration evidence. PARTE extracts planar patches and represents them using our novel Plane Context Histogram (PCH), a descriptor that encodes the geometry surrounding each patch, while a two-level matching procedure identifies reliable plane correspondences. Candidate point and plane correspondences are combined in a confidence-weighted compatibility graph for joint outlier rejection, followed by rigid transformation estimation. When no usable plane correspondences are available, PARTE naturally reduces to point-only registration. We evaluate PARTE on 8,097 registration pairs across six indoor and outdoor benchmarks spanning dense RGB-D and sparse LiDAR measurements. Evaluations show PARTE achieves the highest overall success rate against 13 standard and state-of-the-art methods while maintaining low runtime. An open-source C++ implementation with Python bindings is provided at https://ariarobotics.github.io/parte/.

0.50

Spectral Consistency-Guided Multiview Point Cloud Registration for Low-Overlap Scenes

cs.CV ·2026-09-11 ·Tianyu Li, Yanghong Lin, Shudong Zhou, Kui Yang, Jingru Zhang +2 more
code/data similarity 0.69
Abstract

Multiview point cloud registration is particularly challenging in low-overlap scenes, where reliable correspondences are limited and incorrect pairwise transformations can affect global pose estimation. In addition, registering all scan pairs is computationally expensive because many pairs provide weak geometric information. To address these problems, we propose GMPCR, a non-learning-based spectral consistency-guided framework for efficient and robust multiview point cloud registration. GMPCR builds a refined second-order compatibility structure from initial correspondences and uses its dominant spectral response to evaluate both correspondence reliability and scan-pair confidence. This allows unreliable correspondences to be filtered and informative scan pairs to be selected before relative transformation estimation, leading to a sparse pose graph and reduced pairwise registration cost. For each retained scan pair, maximal-clique-based hypothesis generation is used to estimate reliable relative transformations. The resulting pose graph is further refined by an adaptive history-aware synchronization scheme, in which the effect of residual history is adjusted according to changes in the global rotation residual. A recovery mechanism also allows down-weighted edges to regain confidence when their global consistency improves. Experiments on 3DMatch, 3DLoMatch, ScanNet, and ETH demonstrate the effectiveness of GMPCR. It achieves registration recalls of 97.2% and 89.6% on 3DMatch and 3DLoMatch, respectively, while maintaining competitive performance on ScanNet and ETH. The results show that GMPCR provides a favorable balance among registration accuracy, robustness to low overlap, and computational efficiency. The code is publicly available at https://github.com/swccj/gmpcr.

0.31

Context without Commitment: Robust Dense Correspondence under Non-Rigid Deformation

cs.CV ·2026-09-29 ·Yuzhen He, Sara Homscheid
code/data similarity 0.68
Abstract

Non-rigid point-cloud registration aims to find the corresponding target point for each point on a deforming source surface. Point-level matching keeps the full target cloud available, but correspondence becomes ambiguous when different regions have similar local geometry. Regional or coarse-to-fine methods provide broader spatial context, but an incorrect regional match can exclude the correct correspondence before dense matching. We propose CoCo-Reg, which uses regional patches to enrich dense point features without allowing patch predictions to restrict the final point-level search. CoCo-Reg constructs farthest-point-sampled patches, exchanges geometric information within and between source and target, supervises patch similarity using identity-corrected point overlap, and projects the resulting regional information back to dense point features. The final registration stage still scores the full target cloud before global point-level candidate selection. On 726 held-out ModelNet10 objects across nine deformation levels, two established learning-based baselines obtain mean correspondence errors of 0.1993 and 0.1921, whereas CoCo-Reg obtains 0.0547. Relative to its point-level baseline, this is a 72.6\% reduction. CoCo-Reg achieves lower correspondence error on 92.3\% of paired test objects and reduces the mean fraction of points with error above 0.1 from 47.3\% to 17.3\%. Chamfer distance and HD95 decrease in the same direction, and CoCo-Reg remains lower across all tested deformation levels. These results support using regional context for dense non-rigid correspondence without imposing a hard patch-level restriction on the final search. Because evaluation uses one checkpoint per method, the reported gains characterize the complete systems rather than the isolated causal contribution of an individual component. Code will be made publicly available.

0.19

GRIP: Gaussian Rendering as a Cross-Modal Bridge for Image-to-Point Cloud Registration

cs.CV ·2026-09-22 ·Karim Slimani, Catherine Achard, Eric Marchand, Brahim Tamadazte
similarity 0.68
Abstract

This paper introduces GRIP, a pose-conditioned refinement framework for pixel-to-point matching and 2D to 3D registration. Given an initial coarse pose estimate, GRIP addresses the structural mismatch between grid based image descriptors and unordered point cloud descriptors by softly rendering learned 3D point features onto the image grid through Gaussian feature splatting. The rendered point derived feature map is then fused with image features by a pixel aligned transformer, enabling visual semantic and geometric cues to interact in a shared 2D representation. The refined features are decoded and propagated to finer resolutions for dense correspondence estimation and final pose refinement. Experiments on RGB D Scenes V2 and 7 Scenes demonstrate state of the art inlier ratio and competitive registration recall, with stronger performance under stricter evaluation thresholds.

0.14