CS Paper Radar

PnP-Transformer: A Neural Pose Solver for Zero-Shot 6D Object Pose Estimation

Emirkan Burak Yilmaz, Yakup Genc

cs.CV ·submitted 2026-10-19 09:57 UTC · v2
publishedbenchmarkcode/data

Abstract

We present PnP-Transformer, a neural pose solver designed as an iterative-free, differentiable alternative to classical PnP-RANSAC algorithms. PnP-Transformer regresses the 6D object pose by processing predicted semi-dense 2D-3D correspondence fields alongside confidence scores, while mapping geometric inputs into a continuous latent space. To evaluate its practical utility, we integrate PnP-Transformer into a zero-shot 6D pose estimation pipeline, where the correspondence module and pose solver are trained separately. PnP-Transformer achieves a 41.2% mean AR score with low latency (0.46 s/obj) on seven core BOP benchmark datasets, surpassing all prior baselines (such as RayPose with 39.1% AR) but one (Co-op with 58.4% AR). When the pose solver is replaced with EPnP-RANSAC (similar to Co-op) while keeping the correspondence module unchanged, the RANSAC alternative outperforms PnP-Transformer on six of the seven datasets by reaching 52.2% mean AR at a cost of an additional 60 ms per object, revealing an accuracy-latency trade-off. Code and pretrained models are available at https://github.com/ebylmz/pnp-transformer.

Comment
Accepted to ECCV 2026 R6D Workshop

Closest papers

Nearest neighbours by meaning across the whole index.

Back to the Feature: Zero-Shot 6DoF Pose Estimation via Dense Local Features

cs.CV ·2026-09-06 ·Ali Rafiaei, Michael Greenspan
publishedbenchmark similarity 0.76
Abstract · Accepted at BMVC 2026

We present B2TFPose, a training-free zero-shot method for 6DoF pose estimation of unseen objects from RGB images. Using a single frozen DINOv3 vision transformer as its only pretrained component within the pose estimation pipeline, B2TFPose extracts dense patch-level features that generalize across the synthetic-to-real domain gap without any task-specific fine-tuning, revisiting the classical local feature matching paradigm through the lens of large-scale self-supervised foundation models. Three contributions advance the training-free state of the art. A geodesic non-maximum suppression strategy retrieves a viewpoint-diverse template set for coarse-to-fine correspondence matching. Render-guided Re-Correspondence (RRC) synthesizes object-specific views at the estimated pose and re-establishes dense 2D-3D correspondences to sharpen the initial estimate without additional learned parameters. A multi-mask hypothesis selection strategy jointly scores competing segmentation candidates to resolve segmentation ambiguity. On the seven core datasets of the BOP Benchmark, B2TFPose achieves 40.7 mean AR without refinement and 56.4 with refinement, establishing state-of-the-art performance among training-free RGB methods and outperforming trained counterparts including GigaPose and GenFlow, at competitive inference speed.

0.37

TinyDETR-Pose: Towards End-to-End Real-Time Single-Stage 6DoF Object Pose Estimation with Lightweight Transformers

cs.CV ·2026-08-15 ·Paul Julius Kühn, Duc Anh Nguyen, Saptarshi Neil Sinha, Michael Weinmann, Arjan Kuijper
similarity 0.75
Abstract

Real-time 6DoF object pose estimation on resource-constrained hardware remains challenging, as accurate correspondence-based and refinement pipelines typically rely on non-differentiable PnP/RANSAC stages or costly iterative refinement, while recent foundation-model-based approaches incur inference costs that are prohibitive for edge deployment. We present TinyDETR-Pose, a lightweight, end-to-end, single-stage framework that jointly detects objects and regresses their full 6D pose in a single forward pass. Built on the efficient LW-DETR architecture, TinyDETR-Pose formulates detection and pose estimation as a set-prediction problem and attaches dedicated MLP heads for rotation, monocular depth, and projected object center regression to each decoder query, eliminating the need for PnP, NMS (non-maximum suppression), or iterative pose refinement. Object symmetries are handled through a ADD-S loss applied uniformly to all objects, without the need for object-specific loss schedules or separate geodesic/ADD supervision. In addition, predictions are assigned to ground truth using a symmetry-safe Hungarian matcher based on class and 2D spatial cues, yielding stable assignment under symmetry and depth ambiguity. On YCB-V, TinyDETR-Pose achieves a comparable ADD-S AUC of 85.9, while requiring up to 72.7% fewer parameters than other DETR-based single-stage pose-estimation approaches. Due to its compact design, TinyDETR-Pose runs in real time and achieves an inference latency of only ~4.5 ms per frame on an NVIDIA Jetson Nano using TensorRT, demonstrating that accurate end-to-end transformer-based 6D pose estimation can be made practical for edge deployment.

0.04

STA-TFM: Spatio-Temporal Aggregation Across Views TransForMer for Pose Estimation

cs.CV ·2026-09-21 ·Mena Kamel, Natalie Won, Amrut Sarangi, Sven Jager, Albert Pla Planas
publishedcode/data similarity 0.71
Abstract

Monocular 3D human pose estimation (HPE) remains challenging due to depth ambiguity, occlu- sions, and the need for temporal consistency. While multi-view methods provide superior accuracy over monocular approaches, they often require complex setups. We introduce STA-TFM, a transformer-based architecture that combines spatial and temporal information for multi-view pose estimation. The approach leverages DSTformer, a monocular feature extractor, to capture long-range pose dependencies within each view. A fusion transformer then aggregates information across views to produce coherent 3D estimates. To address training data scarcity, we use a data generation pipeline that transforms any existing 3D pose dataset into multi-view setups with controllable parameters. Experiments on various datasets demonstrate that STA-TFM outperforms existing camera-parameter-free multi-view methods. STA-TFM achieves 50.9% and 49.5% reductions in mean per joint position error (MPJPE) and mean per joint velocity error (MPJVE) on the DHP19 dataset. Furthermore, it achieves 6.7% and 7.7% respective reductions on HAA4D, and a 15.2% MPJPE reduction on TotalCapture. STA-TFM handles noisy and missing 2D inputs, supporting potential deployment in healthcare monitoring, athletic assessment, and immersive technologies. Code, training checkpoints, and data are available at https://zenodo.org/records/22832620.

0.37

WAPR: A Foundation Model for Wide-Angle Refinement in Unseen Object Pose Estimation

cs.CV cs.AIcs.RO ·2026-10-07 ·Yulin Wang, Mengting Hu, Hongli Li, Jianghao Zhou, Chen Luo
top venuecode/data similarity 0.70
Abstract · Accepted to ECCV 2026. 19 pages, 4 figures. Yulin Wang and Mengting Hu contributed equally. Corresponding author: Chen Luo

Real-world applications require 6D pose estimation to be accurate, fast, and scalable to unseen objects. This paper introduces WAPR, a zero-shot wide-angle pose refinement model that refines candidate poses with rotational deviations up to 90 degrees. With as few as 12 candidate poses per detected object instance, WAPR supports fast inference within 1 s per frame and reaches a pose-estimation throughput of up to 25 detected object instances per second. To support wide-angle training for rotationally symmetric objects, WAPR uses rotational symmetry priors to canonicalize symmetry-equivalent pose targets before loss computation. We further construct SA6D, a large-scale 6D training dataset with such priors. SA6D obtains KASAL-assisted rotational symmetry priors for 944 GSO scans and expands them through geometry and texture augmentation into about 50K augmented object instances and about 2M rendered RGB-D images. In addition, an angle-balanced loss stabilizes learning across different angular ranges by reducing the influence of uninformative large-error cases. Experiments on seven BOP core datasets show that WAPR achieves state-of-the-art performance in unseen-object 6D pose localization and detection under both fast and unconstrained inference settings. Project page: https://github.com/WangYuLin-SEU/WAPR.

0.52

ZIL: Zero-shot Image-to-LiDAR Registration

cs.CV ·2026-09-19 ·Zijun Li, Xiaotian Sun, Xuelun Shen, Yao Dai, Sheng Ao +4 more
code/data similarity 0.70
Abstract

Image-to-LiDAR registration estimates the camera pose of an image with respect to a LiDAR point cloud. It has diverse applications in autonomous driving, robot navigation etc. However, state-of-the-art (SOTA) methods still 1) mostly assume same-frame inputs, struggling with the image and point cloud from distant frames; 2) rely on domain-specific training, failing to generalize to unseen scenarios. We propose ZIL, the first foundation model for zero-shot non-synchronized image-to-LiDAR registration. ZIL encodes the input image and point cloud with the Vision and Point Transformers. In addition to regressing the relative pose, ZIL also learns to predict 3D coordinates, which substantially improves the pose accuracy without additional annotations. Interestingly, naive mix-data training cannot enable zero-shot generalization, which requires normalization on both camera intrinsics and the LiDAR vertical-axis origin. Trained on 7 public datasets with 1.4M LiDAR frames, ZIL consistently and significantly outperforms previous SOTA with a single model across 5 in-domain and zero-shot benchmarks, reducing the translation and rotation errors by up to 87% and 76% (shown in Fig. 1). Code and models are available at https://github.com/ZijunLi7/ZIL.

0.33

Prior-free relative 6D pose estimation of multiple object instances

cs.CV ·2026-09-08 ·Behdad Khodabandehloo, Andrea Caraffa, Davide Boscaini, Fabio Poiesi
benchmark similarity 0.70
Abstract · Technical report. 12 figures, 6 tables

Object 6D pose estimation formulations have progressively reduced reliance on object-specific priors, evolving from explicit 3D models to multi-view object captures to single reference images. We take this progression to its extreme by introducing prior-free relative 6D pose estimation, which lifts the assumption of knowing which object is to be posed within the scene. This novel setting aims to estimate the relative poses of multiple instances of an unknown object within the same image, without requiring CAD models, templates, or reference images. We solve this by formulating a novel method (PROSE) that finds coarse correspondences between object instances using multimodal foundation features, thus requiring no training. We refine these correspondences by imposing cycle consistency across tuples of instances, and leverage the resulting globally consistent correspondences to estimate the relative 6D pose between any pair of instances. To enable systematic evaluation, we design a novel benchmark (PRENCH) built from three multi-instance BOP datasets and enriched with task-specific metadata. PROSE consistently outperforms baselines obtained by adapting state-of-the-art single-image methods to the proposed setting, while requiring neither task-specific supervision nor additional learned components. Project website: https://tev-fbk.github.io/PROSE/

0.20

Correspondence-Free Camera Pose Estimation by Matching Moments

cs.CV cs.LGcs.ROeess.IV+1 ·2026-11-16 ·Subhransu S. Bhattacharjee, Dylan Campbell, Rahul Shome
similarity 0.69
Abstract · 65 pages, including references and appendices; under review

The blind perspective-$n$-point (PnP) problem is to estimate the pose of a calibrated camera from 2D and 3D point sets with unknown correspondences. We show that, for complete, noiseless observations, fourteen permutation-invariant image moments up to order four identify a fixed camera pose for almost every 3D point set containing at least twenty points. Our learning-free method, MomentPnP, matches these moments between the observed 2D points and the projected 3D points to initialize a camera pose without correspondences and refines the pose and correspondence weights using expectation--maximization. Across the test sets of three benchmarks, our method reduces median rotation error by $5$--$170\times$ relative to the best learned baseline, both with and without outliers. We recover accurate poses even with as many outliers as inliers. On dense ETH3D scans, pose accuracy improves as the point sets grow, even as individual correspondences become harder to resolve.

0.19

ASM-6D: Fast Certified Pose-Shape Inference with Complete Correspondence Flow Maps

cs.CV cs.RO ·2026-10-11 ·Ho Jin Choi, Minku Kim, Nadia Figueroa
code/data similarity 0.68
Abstract · 18 pages, project page: https://asm6d-project.github.io/

Category-level 6D pose and shape estimation requires recovering an object's pose and geometry from partial observations without an exact instance model. We present ASM-6D, which couples generative complete-geometry prediction with explicit category-level pose-shape inference through shared correspondences. Given an RGB-D image, ASM-6D generates alternative complete 3D correspondence hypotheses whose point identities are shared with a category-level Active Shape Model (ASM), including occluded points. Each hypothesis is fitted directly for rotation, translation, metric scale, and instance shape without a separate correspondence-assignment stage. We analytically eliminate translation and shape coefficients, reducing fitting to a nine-variable scaled-rotation optimization problem that enables efficient batched evaluation of multiple hypotheses in real time. ASM-6D achieves state-of-the-art performance on ROPE and HouseCat6D benchmarks. Ablations demonstrate the importance of generative correspondence prediction and active shape variation. The representation also supports shape completion, shape-dependent pose ambiguity, tracking, and robotic grasping at 6-38 Hz, depending on the inference budget.

0.22