CS Paper Radar

RFCheck: Synthetic RF Sensing Data Can Fail Measurement Consistency

Di Zhang, Yuanhao Cui, Tony Xiao Han, Xiaojun Jing

eess.SP ·submitted 2026-08-10 14:49 UTC · v1

Abstract

Synthetic radio-frequency (RF) sensing data are widely used to augment wireless sensing tasks, yet their measurement consistency with real data is rarely evaluated under matched acquisition conditions. This paper identifies a measurement-consistency failure mode: synthetic samples may pass task-facing checks while deviating from the measurement behavior of real samples collected and processed by the same sensing pipeline, potentially introducing synthetic shortcuts and biasing downstream model selection. We propose RFCheck, a calibrated measurement audit that uses held-out real data from the same acquisition and preprocessing pipeline as the reference. RFCheck calibrates representation-specific tests on real samples and flags synthetic samples whose responses exceed the calibrated real-data range. We use the audit for candidate screening and residual repair. We validate RFCheck primarily on Wi-Fi channel state information (CSI), where the audit examines delay-domain and local frequency-domain structures. Experiments show that aggregate statistics and label-based screening can miss measurement failures detected by RFCheck. Under the same label acceptance rule, low-risk and high-risk synthetic candidates exhibit different downstream behavior. A repair reference reduces the flagged ratio to 10.83% while preserving mean task performance. In a held-out proposal study, correction followed by calibrated selection produces a class-balanced set with no flagged samples under a fixed training budget. We further apply the same calibration principle to frequency-modulated continuous-wave (FMCW) millimeter-wave radar gesture sensing. The results show that synthetic RF sensing data can violate measurement consistency even when conventional task checks are satisfied, motivating measurement-aware diagnosis and mitigation before augmentation.

Closest papers

Nearest neighbours by meaning across the whole index.

When Temporal Perturbations Act Like Sensor Biases: Label-Free Auditing of Wearable Activity Recognizers

cs.LG cs.AIcs.CR ·2026-09-24 ·Qingyu Wu, Yuan Wei, Renju Liu, Hua Cheng
similarity 0.61
Abstract

Wearable human-activity recognition (HAR) models operate across sensors, subjects, and backbones, yet a smooth waveform may appear temporal while exploiting a persistent sensor offset primarily. We introduce SpectrumAudit, a label-sealed audit that fits a phase-randomized full-window stimulus on calibration windows from subjects held out from training and testing. After selection, it replays its exact DC projection and budget-constrained zero-mean residual on the same frozen victim without refitting. Across 27 victims from three datasets and three backbones, the selected waveforms cause 2.87-40.83-point three-phase robust accuracy losses. Under this replay budget, DC is more damaging than AC on 24/27 victims and recovers at least 90% of the full drop on 22/27; all 5 failures occur on WISDM. In a held-out UTD-MHAD check, the selected waveform causes 13.49-pp accuracy and 11.68-pp macro-F1 losses, versus -0.66 pp for matched random changes. The audit diagnoses offset versus zero-mean variation under a common peak-budget cap. The code will be released upon acceptance.

0.34

TrustAgent-RFF: Agentic Diagnostic Planning for Reliable RF Fingerprinting under Domain Shift

cs.LG cs.AI ·2026-10-18 ·Chuan Liu, Tianya Zhao, Yiting Wang, Junqing Zhang, Xuyu Wang
similarity 0.59
Abstract · 10 pages, 6 figures, 7 tables. Submitted to INFOCOM

Radio frequency fingerprinting (RFF) models can achieve accuracy under source domain conditions but become unreliable when the receiver, distance, collection day, or environment changes. Incorrect predictions in unseen domains may receive high softmax confidence, making confidence thresholding insufficient for trustworthy deployment. We propose TrustAgent-RFF, a prediction level reliability framework for RFF that operates with a frozen in-phase and quadrature (I/Q) classifier without target domain labels. For each device prediction, the framework acquires radio frequency evidence: counterfactual stability, prototype consistency, acquisition domain similarity, and signal quality. A source calibrated trust estimator combines these diagnostics with classifier confidence, prediction margin, and evidence availability indicators. Source derived lower tail penalties and cross module interactions reduce trust when diagnostic signals indicate weak support. A large language model (LLM) based planner adaptively selects the next diagnostic action based on evidence, trust state, action costs, and remaining budget. A deterministic source calibrated decision layer updates the prediction state as Accept, Reject, or Defer. Experiments across five RFF datasets and classifier backbones reveal an average source to target accuracy drop of 38.7% and show that many incorrect target domain predictions remain highly confident.

0.25

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.58
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

CSI-Agent: LLM-Assisted Few-Shot Adaptation for Cross-Domain Wi-Fi CSI Sensing

cs.AI cs.NI ·2026-09-25 ·Tianya Zhao, Chuan Liu, Xuyu Wang
similarity 0.58
Abstract · 10 pages, 6 figures, 5 tables. Submitted to INFOCOM

Wi-Fi channel state information (CSI) has enabled device-free sensing applications such as human activity recognition. However, CSI sensing models remain brittle in cross-domain deployment, where changes in users or environments can produce incorrect predictions. Existing solutions usually treat this problem as an offline model-design problem, by pretraining a stronger representation or applying one fixed adaptation method to the entire target domain. In practice, labeled target data are scarce and different classes may fail in different ways under the same domain shift. To address this, we propose CSI-Agent, an evidence-seeking LLM agent that reformulates cross-domain CSI adaptation as a deployment-time decision-making problem. Rather than processing raw CSI or making sample-level predictions, CSI-Agent summarizes target-domain behavior into sensing-grounded class-level evidence. It establishes a strong target-adaptive default from complementary CSI views and uses an LLM planner to determine whether each class should retain the default or invoke a specialized action. Deterministic verification and bounded execution further reduce unreliable interventions. We evaluate CSI-Agent on four public datasets using five cross-domain splits covering device, user, environment, and compositional shifts. Under 1-shot adaptation, CSI-Agent achieves the best target-domain performance across all splits and improves the average Macro-F1 by about 16\% compared to the strongest baseline method.

0.28

Temporal vs Spectral Resolution in CSI Reporting for Wi-Fi ISAC

eess.SP ·2026-10-16 ·Abolfazl Zakeri, Sumit Roy, Nhan Thanh Nguyen, Markku Juntti
similarity 0.57
Abstract · Under review for publication

CSI feedback is fundamental to proposed uses of Wi-Fi sensing such as human activity recognition (HAR); but it also constitutes significant overhead as resources must be allocated away from data communications. Wi-Fi CSI extraction can be explored along two dimensions in IEEE 802.11bf: reporting intensity, i.e., temporal resolution, and number of reported subcarriers, i.e., spectral resolution. We explore periodic and IEEE 802.11bf threshold-based reporting at matched rates, and uniform decimation and block-mean grouping at matched report sizes. We further propose reporting the mean CSI accumulated since the last report. Using the 802.11bf report size as the metric, we evaluate the accuracy-cost tradeoffs on three public datasets with our proposed model, a convolutional neural network combined with a gated recurrent unit and temporal pyramid pooling. The proposed periodic reporting with mean payload and block-mean grouping improves accuracy by up to 53 percentage points at equal CSI overhead cost. Temporal resolution is generally more cost-effective than spectral resolution. With only at most 7.7% of full-CSI feedback cost, the proposed scheme achieves 96-98% of full-CSI accuracy.

0.23

Input-Correlated Supervision Noise Limits the Benefits of OTA Training for Learned Receivers

eess.SP ·2026-08-13 ·Riku Luostari, Dani Korpi, Olav Tirkkonen, Harri Holma
similarity 0.56
Abstract

While learned wireless receivers are typically studied using synthetic data, the impact of over-the-air (OTA) measurements for training remains unclear. We conducted a 5.88 GHz measurement campaign with a 5G/6G-like orthogonal frequency-division multiplexing (OFDM) system across diverse environments and mobility conditions, and trained a neural channel estimator and a capacity-matched end-to-end neural receiver using mixtures of measured and synthetic data. Increasing the OTA fraction revealed a fundamental asymmetry: measured data consistently improved the end-to-end receiver, whereas the channel estimator peaked at an intermediate fraction and degraded with fully measured training. We identified supervision quality as a key contributor: OTA channel labels are derived from noisy received signals and therefore contain supervision errors correlated with the receiver input, whereas decoded bits validated by a cyclic redundancy check (CRC) provide effectively error-free supervision. Denoising the channel labels mitigated the degradation, and a controlled simulation showed that label noise of equal power degrades the estimator far more when it is correlated with the input. For OTA training, end-to-end receivers thus benefit from fully measured data, whereas channel estimators benefit from moderate OTA fractions but require improved label quality.

0.38

Continuous-Time Set-Transformers for Asynchronous WiFi-IMU Indoor Localization

cs.LG cs.AI ·2026-11-09 ·Mohamed Bachar, Ilyass Abouelaziz, Yuehua Ding
published similarity 0.55
Abstract

Indoor localization commonly combines WiFi received signal strength indicator (RSSI) fingerprints with inertial measurements. However, these sensor streams are sampled asynchronously at different rates; therefore, observations rarely align in time and may be missing or stale. Most existing methods resample the data onto a shared clock and process each modality using a separate branch. We instead present a continuous-time transformer that represents observations as an unordered set of timestamped tokens. Each token encodes its measurement, modality, and elapsed time since acquisition. A single attention block jointly fuses information across modalities and time, avoiding both resampling and modality-specific branches while remaining invariant to token order. During training, we randomly mask entire modalities and individual observations, enabling the model to operate under missing or outdated inputs. We validate the modality-specific encoders on their respective benchmarks and evaluate the fused model on both simulated and real datasets, including a crosssession dataset collected on unseen days. The proposed approach improves upon an open WiFi fingerprinting baseline under cross-session drift, remains competitive with learned fusion and dead-reckoning baselines, and degrades gracefully as observations become missing or stale. These results suggest that a single continuoustime transformer provides a practical framework for indoor localization from asynchronous sensors.

0.29

CorteXforge: Scenario-Based RF Dataset Generation on Real Testbeds

cs.LG cs.IT ·2026-10-19 ·Andréa Joly, Leonardo S Cardoso, Jean-Marie Gorce
similarity 0.54
Abstract

Deep learning for radio frequency (RF) signal analysis relies on large annotated datasets, yet synthetic datasets trade physical realism for controllability, while uncontrolled over-theair measurements offer realism but limited reproducibility. We present CorteXforge, a scenario-based framework for generating realistic and reproducible RF datasets on programmable software defined radio (SDR) testbeds. High-level RF scenarios are automatically translated into synchronized experiments executed on the SLICES-RI/CorteXlab platform, producing fully annotated Signal Metadata Format (SIGMF) datasets that capture hardware impairments and propagation effects. We validate CorteXforge through automatic modulation classification using ModForge, an over-the-air (OTA) dataset generated with the framework. Cross-domain experiments reveal a synthetic-to-real performance gap and show that synthetic pretraining remains beneficial for adaptation to OTA data. CorteXforge provides a practical foundation for reproducible RF dataset generation and future research on domain generalization.

0.27