CS Paper Radar

Hand-Written PTX Tensor-Core GEMM Kernels: A Multi-Precision Study on NVIDIA L4

Matt J. Borowski, Blazej Osinski

cs.DC cs.AI ·submitted 2026-08-10 18:13 UTC · v1
code/data

Abstract

High-performance Tensor Core kernels rely on a low-level PTX pipeline built from asynchronous data movement with cp.async, warp-level matrix loads with ldmatrix, and matrix multiply-accumulate operations with mma.sync. However, most application code accesses Tensor Cores indirectly through the WMMA C++ API. This paper asks a focused, practical question: when does replacing WMMA with hand-written PTX actually pay off? To answer this question, we conduct a controlled, single-GPU study on an NVIDIA L4 GPU (Ada, SM89), comparing double-buffered WMMA baselines with a family of hand-written PTX GEMM kernels across FP16, INT8, and INT4 arithmetic and square problem sizes from $N=512$ to $N=8192$. Every kernel is profiled with Nsight Compute across the full metric set, and PTX speedups are reported relative to the corresponding same-precision WMMA baseline. Hand-written PTX provides no end-to-end speedup for FP16, because its instruction-level gains are offset by operand-packing overhead. In contrast, the PTX kernels achieve consistent speedups of 1.4x-1.8x for INT8, driven primarily by lower instruction counts and better global-memory coalescing, and 2.9x-4.3x for INT4, where native mma.sync.m16n8k64.s4 execution avoids the software-emulated sequence used by the WMMA path. Relative to the FP16 WMMA baseline, the best quantized kernels reach 34.4x (INT8) and 98.7x (INT4) at $N=8192$. Across these experiments, occupancy is a poor predictor of throughput. For large matrices, performance instead tracks memory-system behavior -- particularly global-load coalescing and DRAM-active cycles -- more closely than Tensor Core utilization. These results identify the precisions and operating regimes in which the additional complexity of hand-written PTX is justified.

Comment
10 pages, 6 figures, 12 tables. Code and profiling data: https://github.com/MattJBorowski1991/TensorCorePTX (archived: https://doi.org/10.5281/zenodo.21815137)

Closest papers

Nearest neighbours by meaning across the whole index.

Instruction-Aware Transfer of GPU Implementation Crossovers: a Tensor-Product Discontinuous Galerkin Operator on GB200, H100, and A100

cs.PF cs.DC ·2026-11-11 ·Seiya Nishizawa, Yuta Kawai, Xuanzhengbo Ren
hot direction similarity 0.74
Abstract · 35 pages, 6 figures. Includes supplementary material. Submitted to The International Journal of High Performance Computing Applications

We compare up to six implementations of an FP64 tensor-product discontinuous Galerkin operator at p = 7-1023 on GB200, H100, and A100 with fixed numerics, input, and code. The fastest path is machine dependent: at p = 511, a fused-epilogue GEMM path is 5.0% faster than a fused Tensor Core kernel on GB200 and 6.9% slower on A100. Nominal-peak scaling reproduces the A100 ranking but fails on H100, where the cost of FP64 arithmetic in the profiler-defined FP64 budget depends on the instruction. We therefore price each issued instruction at its architecture-dependent cost in that budget, using a calibration-side counter profile and one derived calibration factor per kernel, with no fit to the target. A retrospective leave-one-GPU-out evaluation, holding out target timings and counters but not the model form, transfers the p >= 511 path times with 1.9% median error at the common MMA shape, and the direction of the crossover at the H100 shape. Restricting the streaming multiprocessors of one A100, with nothing fitted, reproduces the A100-to-GB200 reversal. At roduction-relevant orders the model does not resolve the fastest fused path; the result identifies the crossover mechanism.

0.27

Performance-Portable Exact Gaussian Process Regression in Python via SYCL and oneMath

cs.DC cs.LGcs.PF ·2026-11-12 ·Alexander Strack, Marcel Graf, Alexander Van Craen, Dirk Pflüger
publishedcode/datahot direction similarity 0.72
Abstract · 12 pages, 6 figures, 2 tables. Accepted at the WACCPD 2026 workshop (SC26 Workshops), November 15-20, 2026, Chicago, Illinois, USA

Modern multi-vendor GPU environments force a choice between portable code and native performance. GPRat is an open-source Python library for exact Gaussian process regression built on the HPX asynchronous many-task runtime, tiled algorithms, and CPU/CUDA BLAS backends. We contribute a UXL Foundation oneMath backend with a hybrid HPX/SYCL design, extending GPRat to AMD and Intel GPUs. The new SYCL backend comes within 3% of native CUDA on an NVIDIA A30 at the largest problem size and outperforms the GPflow and GPyTorch libraries by up to 1.75x and 2.17x on the A30 and up to 1.79x and 4.62x on an AMD Instinct MI210. On an Intel Arc B580, a consumer-class card with FP64 throughput below our CPUs, the unmodified SYCL backend trails GPRat's CPU backend. Overall, oneMath's dispatch to vendor-native BLAS lets a single SYCL codebase match CUDA on NVIDIA and outperform established Python GP frameworks on AMD, without vendor-specific code.

0.45

Spec Sheets Are Not Kernels: An ISA- and Source-Level Audit of INT8 Availability on NVIDIA Blackwell Ultra

cs.AR ·2026-08-12 ·Teng-Ruei Chen
code/data similarity 0.72
Abstract · 8 pages (IEEEtran two-column), 2 figures, 3 tables. All sources pinned to commits/digests with access dates; no performance measurements (co…

NVIDIA's published specifications give the Blackwell Ultra GPU (B300) a dense-compute ratio of roughly 30:1 between FP8 and INT8 tensor-core throughput; its predecessors, H200 and B200, both provide 1:1. We audit what this deprioritization means in practice by tracing INT8 W8A8 support through four layers of the stack: the published specifications, the PTX ISA, NVIDIA's CUTLASS kernel library, and the two major open-source LLM serving engines (vLLM and SGLang). We find a consistent, layered withdrawal: (i) the PTX ISA never exposes the fifth-generation tensor-core integer path (tcgen05.mma with .kind::i8) on sm_103a, even though the same PTX revision extends the FP4 kinds to that target, leaving legacy warp-level IMMA as the only architecturally legal integer tensor-core path on B300; (ii) CUTLASS's kernel generator explicitly skips INT8 UMMA generation for any build targeting 103a, while generating FP8 unconditionally; (iii) vLLM ships no INT8 GEMM for Blackwell and fails with a hard runtime error at the first forward pass, after the model has loaded; and (iv) SGLang's ahead-of-time INT8 GEMM stops at Sm90, while its FP8 tuning configurations already cover B200. We document an escape hatch (rerouting vLLM's INT8 path to a JIT-compiled Triton backend via an environment variable), a false-negative trap in the obvious profiler methodology for detecting "native INT8" on sm_103, and the practical failure semantics that make naive testing expensive. Together, these findings show that a quantization format's availability is a property of the whole stack rather than of the model or the spec sheet. Four distinct layers, three of them NVIDIA's own, withdrew INT8 support in mutually consistent ways, and a format that is nominally present on the datasheet is, by default, undeployable on this hardware.

0.62

Unlocking Turing Tensor Cores: A Measured Throughput Account of From-Scratch Pre-training on a Single 22G RTX 2080 Ti

cs.AR cs.CLcs.DCcs.PF ·2026-11-02 ·Dezhou Shen
hot direction similarity 0.69
Abstract · 7 pages, 4 tables

The RTX 2080 Ti (TU102) ships full second-generation Tensor Cores in hardware, yet the vendor throttles FP16 matrix multiplication at the driver level, leaving usable tensor throughput well below the hardware peak. turing-unlock lifts this restriction with a kernel module that, before the nvidia driver binds the device, writes the FP16 speed selectors (SS0=0x88888888, SS1=0x8) and releases the ACR mutex; published measurements report cuBLAS FP16 matmul throughput rising from 55.7 to 91.4 TFLOPS (about 1.6x). On the same 22G 2080 Ti and under the same from-scratch pre-training protocol as the companion memory ledger (five tiers of Chinese encoder-decoder models, 2,451 steps per tier, 16,384 tokens per step, seed 42), we obtain a before/after throughput account: the small tier (75.7M parameters, 512-wide, 8+8 layers, activation checkpointing on) improves in steady-state throughput from 6,480 to 7,246 tok/s (+11.8%) with wall time cut from 1.77h to 1.61h (9.0% saved); the tiny tier goes from 15,150 to 15,866 tok/s (+4.7%) with wall time savings of 3.8%; the three smaller tiers (pico-micro) gain at most +0.3%; per-tier peak memory stays bit-identical, and final quality metrics are bit-identical or consistent within 10^-3. We conclude that the unlock gain is a function of matrix size, rising monotonically with tier -- imperceptible for pico-micro, visible from tiny upward, and cashed out as a double-digit percentage at small -- and that it is a pure throughput gain that leaves training dynamics untouched.

0.32

GC-MoE: Overlapping Expert-Parallel Token Dispatch with FP8/FP4 Grouped GEMM via CUDA Green Contexts

cs.DC cs.AIcs.ARcs.LG+1 ·2026-11-03 ·Yong Li, Kan Liu, Tao Lan
code/data similarity 0.68
Abstract · 25 pages, including appendices

Under expert parallelism, mixture-of-experts (MoE) layers pay all-to-all token dispatch, grouped GEMMs, and a combine step in every layer. In decode each rank holds only 1-256 tokens: dispatch latency and weight traffic dominate while tensor-core utilization is inherently low. In fused operators such as DeepGEMM's Mega MoE, dispatch and computation overlap only by sharing every SM: dispatch warps compete with TMA/MMA and epilogue warps for registers, shared memory, and issue slots; every phase shares one CTA resource budget, synchronization spans the whole SM array, and every replay ends with a workspace-clean pass and a cross-rank barrier. We present GC-MoE, an open-source FP8/FP4 MoE inference operator for NVIDIA Hopper and Blackwell GPUs that uses CUDA Green Contexts to split the device into a small communication partition and a large compute partition. Each role gets its own kernel, resource budget, and synchronization domain, so dispatch and GEMM tune independently. A three-node CUDA Graph (four on Hopper with fused shared experts) launches the dispatch and grouped-GEMM kernels as concurrent roots; a token-ring handshake starts computation on the first filled ring blocks, and double-buffered receive counters remove the trailing cross-rank barrier between replays. The compute partition runs operand-swapped tcgen05 block-scaled MMA on Blackwell and register-A WGMMA with in-register FP4 decoding on Hopper, with fused SwiGLU, requantization, and optional shared experts. On 8 H20 GPUs GC-MoE accelerates DeepSeek-V4.1-Flash decode by 1.188x on average on both the routed and shared-expert suites (peaks 1.296x and 1.353x); on 8 B300 GPUs it accelerates GLM-5.2 and DeepSeek-V4.1-Flash by 1.106x (1.123x with fused shared experts, peak 1.209x), beating Mega MoE at all 54 measured points at matched accuracy. GC-MoE reserves only 20 of 148 SMs on B300 for dispatch.

0.61

Accelerating the Mitigation of LLM Inference Nondeterminism Across GPU Architectures

cs.AR cs.LG ·2026-09-22 ·Liam Cooper, Shinnung Jeong, Hyeran Jeon, Jeffrey Young, Hyesoon Kim
similarity 0.67
Abstract · 14 pages, 5 figures

Large language model (LLM) outputs are expected to be reproducible under greedy decoding, yet in practice the same model, prompt, and software stack produce different outputs on different GPUs. The root cause is floating-point non-associativity combined with hardware-dependent kernel selection. Inference frameworks select different matrix-multiplication kernels on each architecture, with different parallel reduction orders and unspecified tensor-core arithmetic, and the resulting rounding differences can flip output tokens. Existing solutions have imperfect cross-architecture reproducibility and incur a significant performance penalty. We present a solution employing a set of fixed-configuration fused-upcast GEMM kernels that load 16-bit weights from memory, upcast them to FP32 in registers, and accumulate with IEEE-754 arithmetic in a reduction order that is a pure function of the problem shape and is therefore independent of the device, its SM count, or kernel scheduling. By fixing the floating-point reduction order as a function of problem shape alone, every GPU runs the same operation sequence, so cross-architecture reproducibility of the linear layers reduces to correct IEEE-754 arithmetic rather than to rounding differences staying below a tie-flip threshold. We confirm our solution's linear-layer outputs are bitwise identical across NVIDIA Ampere, Ada, and Hopper GPUs, while running $1.17$ to $3.1\times$ faster end-to-end than the state-of-the-art solution and cutting weight-memory traffic in half.

0.32

Warpline: Binary-Level Tracing and Unified Evidence for Agentic GPU Kernel Optimization

cs.PF cs.PL ·2026-11-03 ·Junyu Yin, Vinod Grover, Keren Zhou
similarity 0.67
Abstract · 14 pages, 7 figures, 2 tables

LLM agents are becoming GPU kernel engineers, but they still tune kernels without seeing where the time goes. Hardware profilers report how busy each unit was, not where each warp's time went; intra-kernel tracers can show it, but only with hand-placed probes and a recompilation that alters the very kernel being measured. We present Warpline, which gives agents this view automatically while leaving the kernel essentially unchanged. Warpline analyzes the binary to decide which events to record and inserts probes into the binary itself without recompilation or any manual step. It then aligns the trace with hardware profiling data on one unified timeline. Because it needs only the binary, it can regenerate this evidence for every new version of the kernel at whatever level the agent edits it (source, IR, or PTX), closing the optimization loop without human intervention. On NVIDIA B200, across 35 kernels in Triton, CuTe DSL, and CUDA C++, Warpline adds a median overhead of 1.2% and leaves a median 99.9% of executed instructions unchanged, whereas existing tracers have median overheads of 1.6% to 13.2% and leave only 4.6% to 32.7% unchanged. Warpline also traces closed-source kernels, which these tracers cannot. On 10 SOL-ExecBench problems, agents using Warpline spend less time and fewer model requests than a bare coding agent and NVIDIA's Kernel Design Agents (KDA), yet lead both after every round in geometric mean and reach a 7.69$\times$ geometric-mean speedup, against 6.94$\times$ and 6.13$\times$. Two case studies further demonstrate that Warpline reveals hidden bottlenecks and provides actionable optimization insights.

0.20

Formalizing PTX in Lean to Prove GPU Kernel Correctness

cs.AI ·2026-11-03 ·Luk Koska, Tom Koska, Ben Koska
hot direction similarity 0.67
Abstract

We present an approach to mathematically formalizing PTX, an approach that allows modeling and reasoning about patterns common in GPU kernels for Deep Learning, including acquire-release, tensor cores, proxies, async operations, multi-kernel pipelines and data-dependent control flow. We implement it in Lean and use it to prove the correctness of simple implementations of a WGMMA GEMM kernel, FlashAttention, and a 3-kernel MoE pipeline.

0.21