CS Paper Radar

Unlocking Turing Tensor Cores: A Measured Throughput Account of From-Scratch Pre-training on a Single 22G RTX 2080 Ti

Dezhou Shen

cs.AR cs.CLcs.DCcs.PF ·submitted 2026-11-02 02:51 UTC · v1
hot direction

Abstract

The RTX 2080 Ti (TU102) ships full second-generation Tensor Cores in hardware, yet the vendor throttles FP16 matrix multiplication at the driver level, leaving usable tensor throughput well below the hardware peak. turing-unlock lifts this restriction with a kernel module that, before the nvidia driver binds the device, writes the FP16 speed selectors (SS0=0x88888888, SS1=0x8) and releases the ACR mutex; published measurements report cuBLAS FP16 matmul throughput rising from 55.7 to 91.4 TFLOPS (about 1.6x). On the same 22G 2080 Ti and under the same from-scratch pre-training protocol as the companion memory ledger (five tiers of Chinese encoder-decoder models, 2,451 steps per tier, 16,384 tokens per step, seed 42), we obtain a before/after throughput account: the small tier (75.7M parameters, 512-wide, 8+8 layers, activation checkpointing on) improves in steady-state throughput from 6,480 to 7,246 tok/s (+11.8%) with wall time cut from 1.77h to 1.61h (9.0% saved); the tiny tier goes from 15,150 to 15,866 tok/s (+4.7%) with wall time savings of 3.8%; the three smaller tiers (pico-micro) gain at most +0.3%; per-tier peak memory stays bit-identical, and final quality metrics are bit-identical or consistent within 10^-3. We conclude that the unlock gain is a function of matrix size, rising monotonically with tier -- imperceptible for pico-micro, visible from tiny upward, and cashed out as a double-digit percentage at small -- and that it is a pure throughput gain that leaves training dynamics untouched.

Comment
7 pages, 4 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Hand-Written PTX Tensor-Core GEMM Kernels: A Multi-Precision Study on NVIDIA L4

cs.DC cs.AI ·2026-08-10 ·Matt J. Borowski, Blazej Osinski
code/data similarity 0.69
Abstract · 10 pages, 6 figures, 12 tables. Code and profiling data: https://github.com/MattJBorowski1991/TensorCorePTX (archived: https://doi.org/10.52…

High-performance Tensor Core kernels rely on a low-level PTX pipeline built from asynchronous data movement with cp.async, warp-level matrix loads with ldmatrix, and matrix multiply-accumulate operations with mma.sync. However, most application code accesses Tensor Cores indirectly through the WMMA C++ API. This paper asks a focused, practical question: when does replacing WMMA with hand-written PTX actually pay off? To answer this question, we conduct a controlled, single-GPU study on an NVIDIA L4 GPU (Ada, SM89), comparing double-buffered WMMA baselines with a family of hand-written PTX GEMM kernels across FP16, INT8, and INT4 arithmetic and square problem sizes from $N=512$ to $N=8192$. Every kernel is profiled with Nsight Compute across the full metric set, and PTX speedups are reported relative to the corresponding same-precision WMMA baseline. Hand-written PTX provides no end-to-end speedup for FP16, because its instruction-level gains are offset by operand-packing overhead. In contrast, the PTX kernels achieve consistent speedups of 1.4x-1.8x for INT8, driven primarily by lower instruction counts and better global-memory coalescing, and 2.9x-4.3x for INT4, where native mma.sync.m16n8k64.s4 execution avoids the software-emulated sequence used by the WMMA path. Relative to the FP16 WMMA baseline, the best quantized kernels reach 34.4x (INT8) and 98.7x (INT4) at $N=8192$. Across these experiments, occupancy is a poor predictor of throughput. For large matrices, performance instead tracks memory-system behavior -- particularly global-load coalescing and DRAM-active cycles -- more closely than Tensor Core utilization. These results identify the precisions and operating regimes in which the additional complexity of hand-written PTX is justified.

0.30

The Missing Fourth Term for the Emulation Tensor Memory Equilibrium (TME) Model: The Residue Deconstruction Cost

cs.AR cs.AIcs.PF ·2026-10-07 ·Harun Bayraktar, John Gunnels, Peter Caday
similarity 0.67
Abstract

The Tensor-Memory Equilibrium (TME) model of "FP8 is All You Need (Part 1)" calculates the execution time of Ozaki Scheme II emulation of fp64 as the maximum of a tensor-core term and a High-Bandwidth Memory (HBM) traffic term, plus a per-output reconstruction term. However, it omits the per-input deconstruction cost: every streamed fp64 operand must be scaled, rounded, and reduced modulo each of the $r$ moduli on SIMT pipes before any matrix multiply can issue. In this note we add this fourth term, calibrate its constant from the cuBLAS emulation path, and derive a closed-form operational-intensity threshold $\mathrm{OI}^{*} = c_q r P_{\mathrm{fp64}}/(8P_{\mathrm{int}})$ below which emulation cannot match native fp64 regardless of tensor-core throughput. On the NVIDIA B300 GPU the threshold is $\mathrm{OI}^{*}\approx 0.56$ FLOP/B. As a result, GEMV, SpMV, and low-batch GEMV, which are the memory-bound kernels the original paper claims to accelerate, are limited to 0.3-0.9x of native performance, and the 7-point stencil to 1.8x rather than the claimed 3.1x. Dense GEMM is unaffected as expected. We also show that precomputing and storing the residues moves the same cost into the bandwidth term, and we state the instruction count that an implementation would have to achieve to invalidate the bound.

0.08

Format-Aware Fusion for Fast FP4 Pretraining

cs.LG ·2026-09-04 ·Robert Hu
similarity 0.65
Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

0.13

Spec Sheets Are Not Kernels: An ISA- and Source-Level Audit of INT8 Availability on NVIDIA Blackwell Ultra

cs.AR ·2026-08-12 ·Teng-Ruei Chen
code/data similarity 0.65
Abstract · 8 pages (IEEEtran two-column), 2 figures, 3 tables. All sources pinned to commits/digests with access dates; no performance measurements (co…

NVIDIA's published specifications give the Blackwell Ultra GPU (B300) a dense-compute ratio of roughly 30:1 between FP8 and INT8 tensor-core throughput; its predecessors, H200 and B200, both provide 1:1. We audit what this deprioritization means in practice by tracing INT8 W8A8 support through four layers of the stack: the published specifications, the PTX ISA, NVIDIA's CUTLASS kernel library, and the two major open-source LLM serving engines (vLLM and SGLang). We find a consistent, layered withdrawal: (i) the PTX ISA never exposes the fifth-generation tensor-core integer path (tcgen05.mma with .kind::i8) on sm_103a, even though the same PTX revision extends the FP4 kinds to that target, leaving legacy warp-level IMMA as the only architecturally legal integer tensor-core path on B300; (ii) CUTLASS's kernel generator explicitly skips INT8 UMMA generation for any build targeting 103a, while generating FP8 unconditionally; (iii) vLLM ships no INT8 GEMM for Blackwell and fails with a hard runtime error at the first forward pass, after the model has loaded; and (iv) SGLang's ahead-of-time INT8 GEMM stops at Sm90, while its FP8 tuning configurations already cover B200. We document an escape hatch (rerouting vLLM's INT8 path to a JIT-compiled Triton backend via an environment variable), a false-negative trap in the obvious profiler methodology for detecting "native INT8" on sm_103, and the practical failure semantics that make naive testing expensive. Together, these findings show that a quantization format's availability is a property of the whole stack rather than of the model or the spec sheet. Four distinct layers, three of them NVIDIA's own, withdrew INT8 support in mutually consistent ways, and a format that is nominally present on the datasheet is, by default, undeployable on this hardware.

0.62

Ozaki 2.5: Engineering the Deconstruction Path of fp64-Emulated Dense Matrix Multiplication on FP8 Tensor Cores

cs.MS cs.ARcs.DCcs.PF ·2026-09-08 ·Satoshi Matsuoka
similarity 0.63
Abstract · Essentially a part 3 paper of the FP8 is all you need work but also standalone work to significantly enhance the Ozaki II scheme as well as …

FP8 Ozaki II emulates FP64 matrix multiplication by tensor-core products over a CRT residue system; converting the operands into residue planes (the deconstruction term in the Tensor-Memory Equilibrium model of the companion paper "FP8 is All You Need, Part 1") costs integer-pipe and memory resources before tensor instructions issue. This paper engineers that path; every result is a model projection pending measurement. First, a deconstruction-aware model: on the NVIDIA Rubin GPU the emulated rate reaches the arithmetic roof $P_{\rm FP8}/(3r+1)$ ($\approx 473$ TFLOPS at $r=12$) only within one thread-block cluster; larger outputs are re-split on the fly and held at a floor of $\approx 235$ TFLOPS (half the roof, a ratio of three design integers, not a fit), while real solvers' tall/skinny shapes stay near the crossover, $1.6$-$1.9\times$ over simple deconstruction today. Second, the method: convert-once residue workspaces, an exact two-limb constant-reduction GEMM on integer tensor pipes (or pure-SIMT dp4a), and conversion pipelined behind the MMAs, moving the crossover from $\approx 1211$ to $\approx 480$-$730$. Third, modulus co-design: all-byte and hybrid sets, two supply bounds and a carry-corrected E4M3 split of tail moduli. Fourth and central, the closed-form floor names its hardware escape, and the prize is Rubin's: a stream-side residue-conversion mode on the asynchronous copy path (Option C), a narrow fixed-function block sized as a bill of materials, takes plane formation off the arithmetic pipes and lifts the floor from 235 TFLOPS to the full 473-TFLOPS roof at unchanged cluster reach, about doubling HPL-class FP64 per Rubin GPU, and unbinds conversion-bound sparse kernels. The NVIDIA GB300 GPU, whose 135-TFLOPS roof sits at its own floor, gains little; floor and remedy are Rubin-scale. Application traces ground the analysis; constants are script-checked.

0.49

Instruction-Aware Transfer of GPU Implementation Crossovers: a Tensor-Product Discontinuous Galerkin Operator on GB200, H100, and A100

cs.PF cs.DC ·2026-11-11 ·Seiya Nishizawa, Yuta Kawai, Xuanzhengbo Ren
hot direction similarity 0.63
Abstract · 35 pages, 6 figures. Includes supplementary material. Submitted to The International Journal of High Performance Computing Applications

We compare up to six implementations of an FP64 tensor-product discontinuous Galerkin operator at p = 7-1023 on GB200, H100, and A100 with fixed numerics, input, and code. The fastest path is machine dependent: at p = 511, a fused-epilogue GEMM path is 5.0% faster than a fused Tensor Core kernel on GB200 and 6.9% slower on A100. Nominal-peak scaling reproduces the A100 ranking but fails on H100, where the cost of FP64 arithmetic in the profiler-defined FP64 budget depends on the instruction. We therefore price each issued instruction at its architecture-dependent cost in that budget, using a calibration-side counter profile and one derived calibration factor per kernel, with no fit to the target. A retrospective leave-one-GPU-out evaluation, holding out target timings and counters but not the model form, transfers the p >= 511 path times with 1.9% median error at the common MMA shape, and the direction of the crossover at the H100 shape. Restricting the streaming multiprocessors of one A100, with nothing fitted, reproduces the A100-to-GB200 reversal. At roduction-relevant orders the model does not resolve the fastest fused path; the result identifies the crossover mechanism.

0.30

FOSCAR: Accelerating Decode Attention over 2- and 4-Bit KV Caches through Affine Folding

cs.AI ·2026-11-06 ·Donglin Zhuang, Pragaash Ponnusamy, Xiaoxia Wu, Shuaiwen Leon Song, Zhongzhu Zhou
benchmarkcode/datahot direction similarity 0.63
Abstract

Large-language-model decode attention streams the key-value (KV) cache for every generated token. Packing that cache into 2-bit or 4-bit quantized integers reduces memory traffic but does not automatically translate into latency saving. Existing 2-bit fused kernels reach under 31%/15% of peak HBM throughput on H100/B200. Converting each value and applying its scale and offset before feeding Tensor Cores is a major bottleneck because instruction-issue throughput is scarce on modern GPUs. Instead of applying scale and offset to each KV value, FOSCAR uses affine folding to apply them to the other operand or the output of decode-attention matrix products, depending on the quantization scheme (token-wise or channel-wise). This reduces scale-and-offset operations by up to two orders of magnitude while preserving the dequantized attention output in exact arithmetic. FOSCAR also uses bit manipulation to feed KV operands to Tensor Cores efficiently, requiring only 1 and 0.19 ALU instructions per INT2 element on H100 and B200, respectively. Finally, FOSCAR builds warp-specialized GPU pipelines for Hopper (H100) and Blackwell (B200) using wgmma and tcgen05. On H100, FOSCAR INT2 and INT4 kernels achieve geo-mean speedups of $3.36\times$ and $2.83\times$ over FlashInfer BF16, and $2.03\times$ and $1.71\times$ over TensorRT-LLM FP8. On B200, the corresponding INT2 and INT4 speedups are $2.67\times$ and $2.30\times$ over FlashInfer BF16, $1.48\times$ and $1.28\times$ over TensorRT-LLM FP8, and $1.16\times$ and $1.00\times$ over TensorRT-LLM NVFP4. We integrate FOSCAR into SGLang to benchmark serving efficiency. On long-context serving workloads, FOSCAR increases peak aggregate throughput by up to 170% and 341% over 2-bit and 16-bit baselines, respectively. We open-source FOSCAR as a kernel library at https://github.com/FutureMLS-Lab/FOSCAR.

0.38

ZYFA: Speed and Accuracy of FP8 FlashAttention on AMD CDNA4

cs.DC cs.LG ·2026-11-05 ·Quentin Anthony, Ganesh Bikshandi, Praneeth Medepalli, Stephen Ebert
code/datahot direction similarity 0.62
Abstract · 36 pages, 28 figures, 19 tables

Attention is a core building block of frontier models and often dominates compute-bound prefill at long context. FP8 matrix instructions offer twice the peak throughput of BF16, but they accelerate only matrix multiplication, and the softmax between the two matrix multiplications of attention runs on vector units that FP8 does not accelerate. On the AMD Instinct MI355X, the vendor's AITER kernels reach 39% of peak FP8 matrix throughput at 32K tokens, compared with 49% in BF16. Attention is also more numerically sensitive to quantization than feed-forward layers, and unlike NVIDIA's Hopper and Blackwell GPUs, the MI355X does not track the completion of matrix instructions in hardware, so overlapping the softmax with the matrix multiplications depends on instruction order. We present ZYFA, prefill kernels for the MI355X built on three techniques: (1) computing each FP8 probability directly from its score with a multiply-add and an integer conversion instead of an exponential; (2) a ping-pong schedule in which one group of threads computes its softmax while another executes its matrix multiplications; and (3) scaling each block of probabilities up by a power of two before rounding, and normalizing by the sum of the rounded probabilities. On attention inputs captured from three models and timed at sustained clock speeds, ZYFA achieves 1.16-1.76x the throughput of AITER. On the Gaussian inputs of kernel benchmarks at 32K tokens, it achieves 1.26-1.37x at head dimension 128 and 1.99x for DeepSeek-style multi-head latent attention. The sustained clock of the MI355X depends on operand values, so throughput on random inputs does not reliably predict throughput on real model activations. At head dimension 128, ZYFA's numerical error is within a few percent of that of Composable Kernel and Triton and 62-78% lower than that of AITER's. The source code is available at https://github.com/Zyphra/zyfa.

0.41