CS Paper Radar

Format-Aware Fusion for Fast FP4 Pretraining

Robert Hu

cs.LG ·submitted 2026-09-04 00:42 UTC · v1

Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

Closest papers

Nearest neighbours by meaning across the whole index.

UE5M3 FP4 Block Scaling for Stable Language Model Pretraining

cs.LG ·2026-09-02 ·Robert Hu, Carlo Luschi, Paul Balanca
similarity 0.71
Abstract

Stable 4-bit floating-point (FP4) pretraining is difficult because the E2M1 payload represents only a narrow range of magnitudes. NVIDIA's Transformer Engine \nv{} recipe addresses this with current-tensor scaling, a randomized Hadamard transform (RHT), and bfloat16 (BF16) final layers, adding work outside the FP4 matrix multiplications. We instead pair E2M1 payloads with unsigned E5M3 (\ue{}) block scales. Their wider range permits periodic tensor scaling, while our recipe applies selective stochastic rounding to backward gradients, omits RHT, and uses FP4 in all eligible internal linears. We pretrain a Nemotron-H 8B model for nearly 190 billion tokens. Compared with Transformer Engine \nv{}, the proposed block-16 recipe finishes with lower final-window training loss and, under their respective quantized-inference policies, lower validation loss measured as held-out negative log-likelihood. Its quantized-inference downstream point estimates are also higher on all three reported aggregates. A native \nv{} execution ablation that jointly removes RHT and the BF16 final-block exemption increases measured model-body token throughput by 21.2\%. These results demonstrate end-to-end software-emulated \uefp{} pretraining with a simpler recipe and motivate native support for \ue{} block scaling.

0.45

Gradient-Guided Hardware-Native MIXFP4

cs.LG cs.AI ·2026-11-12 ·Jian-Jia Chen, Brian J. Chan, Wen-Hung Lee, Yi-Ting Li, Po-Shen Chen +6 more
code/data similarity 0.69
Abstract

Blackwell tensor cores support native inference with 4-bit weights and activations (W4A4), but NVFP4 leaves a perplexity (PPL) gap to BF16. Choosing a format for each 16-element block can improve accuracy, but current matrix multiply instructions cannot execute choices this fine. Applying these rules at hardware-compatible tiles loses most of their benefit. We introduce FlipQuant, which selects E2M1 or E0M3 for each MMA weight tile. It keeps both quantized weight candidates fixed and learns a binary format map from end-to-end gradients of a bucketed KL loss to a BF16 teacher, re-evaluating them after each update. Native kernels execute 16 x 64 tiles on SM120 and 256 x 64 tiles on SM100 with median GEMM overheads of 1.9% and 1.7%, respectively. Across six language models and two corpora, FlipQuant at 16 x 64 closes 42.5% of NVFP4's PPL gap to BF16 on average, compared with 13.3% for FourOverSix. Code is available at https://github.com/brian030128/flipquant.

0.37

FP4Quant: Efficient 4-Bit Communication Compression for Model-Parallel LLM Training

cs.AI ·2026-11-03 ·Man Liu, Xingchen Liu, Hairui Zhao, Guangming Tan, Dingwen Tao
published similarity 0.69
Abstract · 5 figures, 3 tables, accepted by IFIP NPC 2026

The rapid scaling of large language models (LLMs) has made communication overhead a critical bottleneck in distributed model-parallel training. Although existing low-precision compression methods can effectively reduce communication costs, further reducing the communication footprint to ultra-low-bit formats such as FP4 introduces new challenges, including limited numerical range, sub-byte storage overhead, and increased computational cost from fine-grained quantization. In this paper, we present \textbf{FP4Quant}, a micro-grouped FP4 compression framework for efficient model-parallel LLM training. FP4Quant integrates a micro-grouped dual-scale FP4 quantization mechanism to preserve local tensor distribution characteristics, a warp-cooperative FP4 packing scheme to enable efficient sub-byte data representation, and a hybrid two-level FWHT pipeline to mitigate quantization errors with GPU-aware execution optimization. Experiments on NVIDIA H100 GPUs with Qwen-7B demonstrate up to 1.56$\times$ end-to-end throughput improvement over BF16, revealing a trade-off between throughput and model quality.

0.28

CertiSum: Bitwise-Identical MXFP4 Training Across Platforms and Parallelism Layouts

cs.LG cs.DC ·2026-11-16 ·Steve Rhyner, Yubo Gao, Stefan de Lasa, Sankeerth Durvasula, Nandita Vijaykumar
similarity 0.68
Abstract

Training with MXFP4, a 4-bit microscaling format, is non-deterministic: identical inputs can produce different results across parallelism layouts and GPU vendors. These differences complicate debugging and training audits and can cause training and inference engines to disagree. We present CertiSum to make MXFP4 training bitwise invariant across runs, parallelism layouts, and GPU vendors. Its key insight is that native FP32 accumulation of MXFP4 products is often already exact for every summation order. CertiSum collects statistics during quantization to certify native matrix multiplication results, recomputes uncertified outputs exactly, and uses exact kernels directly where certification rarely succeeds. CertiSum keeps quantization blocks unchanged across layouts and merges partial sums without rounding, including in attention and weight-gradient computation. In 200-step Qwen3-8B-Base experiments, CertiSum preserves training states bit for bit across AMD MI350X and NVIDIA GB200 and across changes in data, tensor, and context parallelism on MI350X. Across three 8B--14B models on FineWeb-Edu using MI350X, it adds 11.8--60.5% to training-step latency relative to its non-exact MXFP4 counterpart at the larger evaluated input shapes, with speedups of up to $1.24\times$ over BF16 and $1.70\times$ over deterministic BF16.

0.12

Hardware-Aware FP4 FlashAttention-4

cs.LG ·2026-09-03 ·Robert Hu
highly cited similarity 0.68
Abstract

Blackwell's 4-bit floating-point (FP4) tensor cores do not automatically make attention faster because softmax conversion and on-chip dependencies dominate once its matrix products shrink. We address this with \emph{Direct-P} for noncausal inference and a causal path that passes the forward quantization directly into backward. Direct-P maps scores directly to FP4 probabilities and reaches up to 2.13$\times$ the bfloat16 (BF16) forward throughput on an NVIDIA GB200. The causal path reconstructs probabilities from saved quantized queries and keys and uses 8-bit floating-point (FP8) gradient operands, accelerating a complete single-GPU 8-billion-parameter update by up to 1.14$\times$. Matched distributed training retains FP8 probabilities and values; every tested MXFP4 probability/value training trajectory diverges.

0.41

FIGFLEX: A Mixed-Precision FP-INT GEMM Accelerator Co-Designed with Low-Bit LLM Quantization

cs.AR cs.LG ·2026-10-21 ·Faraz Tahmasebi, Haocheng Xu, Andrew Trauger, Yomal Perera, Zhenyu Tang +2 more
similarity 0.67
Abstract · 15 pages, 12 Figures

Weight-only quantization keeps LLM activations in floating point and stores weights as low-bit integers, turning the dominant workload into floating-point-integer (FP-INT) general matrix multiplication. Recent quantizers reach a 2-3-bit average with mixed precision, but hardware has not kept pace: GPUs dequantize weights to FP16 before the tensor-core multiply-accumulate, and bit-parallel FP-INT accelerators run at a single weight precision, so fewer bits save memory but not computation. In this paper, we present FIGFLEX, an algorithm-hardware co-designed mixed-precision accelerator whose bit-parallel datapath scales throughput as precision falls. FIGFLEX contributes (1) a shift-add, radix-4 reformulation of FP-INT multiplication that fuses the multiply-accumulate into a unified, precision-flexible partial-product reduction and roughly halves the partial products, together with a novel INT3 optimization that reclaims the idle datapath radix-4 leaves at that precision; and (2) a mixed-precision quantizer that assigns each channel group its bit-width according to the error GPTQ cannot compensate, with a per-input-channel column scaling whose power-of-two normalization keeps the scaled activations out of the FP16 subnormal range, so that the quantized model maps directly onto FIGFLEX's datapath with the same accuracy as on a GPU. On LLaMA-2-7B, FIGFLEX attains 5.85 and 8.77 WikiText-2 perplexity at 3- and 2-bit average precision, lower than GPTQ, AWQ, SliM-LLM, AMQ, and QuIP# (without fine-tuning), while delivering 1.56x and 1.42x higher whole-chip throughput per area on the linear GEMMs of a 3-bit mixed-precision model than AxCore and FIGLUT, respectively.

0.13

AutoEMatic: Runtime-Adaptive Mixed-Precision LLM Inference via Automatic Exponent-Mantissa Refinement

cs.AI ·2026-11-06 ·Akshat Ramachandran, Reena Elangovan, Rangharajan Venkatesan, Charbel Sakr, Tijmen Blankevoort +2 more
similarity 0.67
Abstract

Existing LLM post-training quantization techniques determine precision before inference begins, yet the precision a model requires varies dynamically across prompts, layers, and inference phases. We present AutoEMatic, a full-stack co-design that adapts the precision of weights, activations, and the KV cache at runtime. A lightweight policy selects each layer's precision at every prefill and decode step from two runtime signals: the entropy of the next-token distribution and the magnitude of each layer's update to its hidden states. This runtime adaptation is made practical by AutoFP, a multi-scale floating-point format that derives 2-, 4-, and 6-bit precisions from a single NVFP4 base format. We realize AutoEMatic on two targets: GPU kernels that execute AutoFP on NVFP4 Tensor Cores, and an accelerator whose vector MAC datapath executes all AutoFP formats natively. Across reasoning and agentic benchmarks, AutoEMatic improves accuracy by up to 21.7% over NVFP4 and matches group-scaled FP6 accuracy on most benchmarks, using 4.9 bits per weight versus 4.5 for NVFP4. On GB300 GPUs, AutoEMatic retains approximately 90-98% of NVFP4 decode throughput across the evaluated configurations. Furthermore, the AutoEMatic accelerator reduces latency by 1.6-2.3x and energy by 7-23% compared to an accelerator with NVFP4-only datapath at iso-accuracy.

0.23

Training an MoE LLM in MXFP4: How We Closed the Gap to BF16

cs.AI ·2026-10-23 ·Han Wang, Zhitao Wang, Natalia Frumkin, Xuanwu Yin, Alireza Khodamoradi +2 more
benchmarkcode/data similarity 0.67
Abstract

Training large language models (LLMs) in sub-8-bit arithmetic promises substantial gains in memory bandwidth and compute throughput, yet FP4 formats introduce quantization error severe enough to destabilize optimization if left unaddressed. We present ALTO, an open-source training recipe for GPT-OSS-20B, a 20-billion-parameter mixture-of-experts (MoE) model, on the MLPerf Small MoE Training benchmark under the MXFP4 microscaling format. The recipe combines established techniques from Abecassis, Felix et al. [arXiv:2509.25149] (hybrid 1D/2D block quantization, randomized Hadamard transforms, and stochastic rounding) with a simplified weight de-oscillation scheme adapted from TetraJet-v2 [arXiv:2510.27527]. On C4 validation at global batch size 16, MXFP4 + RHT + SR + de-oscillation reaches a validation loss of 3.3350 at 16,128 steps, only 0.007 above the BF16 baseline (3.3283), closing roughly 50% of the gap left by MXFP4 without de-oscillation (3.3418). Measured by steps to reach the MLPerf quality target (validation loss 3.34), de-oscillation cuts the FP4 convergence overhead relative to BF16 from +20.0% to +5.0%. We also report negative end-to-end results from differential gradient estimation, outlier clipping, and macro-block scaling, despite each showing operator-level SNR gains. All experiments use simulated MXFP4 kernels on AMD MI300X hardware and wall-clock speed has not been optimized.

0.26