CS Paper Radar

UE5M3 FP4 Block Scaling for Stable Language Model Pretraining

Robert Hu, Carlo Luschi, Paul Balanca

cs.LG ·submitted 2026-09-02 17:32 UTC · v1

Abstract

Stable 4-bit floating-point (FP4) pretraining is difficult because the E2M1 payload represents only a narrow range of magnitudes. NVIDIA's Transformer Engine \nv{} recipe addresses this with current-tensor scaling, a randomized Hadamard transform (RHT), and bfloat16 (BF16) final layers, adding work outside the FP4 matrix multiplications. We instead pair E2M1 payloads with unsigned E5M3 (\ue{}) block scales. Their wider range permits periodic tensor scaling, while our recipe applies selective stochastic rounding to backward gradients, omits RHT, and uses FP4 in all eligible internal linears. We pretrain a Nemotron-H 8B model for nearly 190 billion tokens. Compared with Transformer Engine \nv{}, the proposed block-16 recipe finishes with lower final-window training loss and, under their respective quantized-inference policies, lower validation loss measured as held-out negative log-likelihood. Its quantized-inference downstream point estimates are also higher on all three reported aggregates. A native \nv{} execution ablation that jointly removes RHT and the BF16 final-block exemption increases measured model-body token throughput by 21.2\%. These results demonstrate end-to-end software-emulated \uefp{} pretraining with a simpler recipe and motivate native support for \ue{} block scaling.

Closest papers

Nearest neighbours by meaning across the whole index.

Format-Aware Fusion for Fast FP4 Pretraining

cs.LG ·2026-09-04 ·Robert Hu
similarity 0.71
Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

0.13

What Matters for NVFP4 Training? A Comparative Study of Low-Precision Pretraining Recipes

cs.CL cs.AIcs.LG ·2026-10-17 ·Anjulie Agrusa, Andrei Panferov, Elizabeth Wei, Keith Wyss, Paul Gibbons +5 more
published similarity 0.70
Abstract · 10 pages, 4 figures, 4 tables. Accepted at the ICML 2026 Workshop on Resource-Adaptive Foundation Model Inference (AdaptFM), Seoul, South Ko…

Training large language models directly in 4-bit floating-point (FP) formats promises substantial improvements in throughput and energy efficiency. While some recipe design choices have been validated at scale, many promising approaches remain untested beyond small models and short token horizons, leaving open the question of which trends will hold. We present a systematic comparison of recent NVFP4 recipes at medium model scale, evaluating dense 8B and 30B-A3B MoE models trained for up to 1T tokens, with a focus on which ingredients are necessary for accuracy recovery. We propose a final recipe grounded in the principles behind established stable NVFP4 training at scale, incorporating state-of-the-art techniques such as unbiased gradient estimation with lower quantization error than stochastic rounding. To the best of our knowledge, this is the strongest FP4 training result demonstrated at this scale to date in loss gap to BF16. Through ablation studies, we find that: (i) each technique in the optimized recipe measurably improves loss trajectory, (ii) selective high-precision layers are necessary for recovering accuracy at scale, (iii) not all tensors in the backward pass benefit equally from de-biasing, leaving room to apply complementary error-reduction techniques to the remaining tensors.

0.28

Training an MoE LLM in MXFP4: How We Closed the Gap to BF16

cs.AI ·2026-10-23 ·Han Wang, Zhitao Wang, Natalia Frumkin, Xuanwu Yin, Alireza Khodamoradi +2 more
benchmarkcode/data similarity 0.70
Abstract

Training large language models (LLMs) in sub-8-bit arithmetic promises substantial gains in memory bandwidth and compute throughput, yet FP4 formats introduce quantization error severe enough to destabilize optimization if left unaddressed. We present ALTO, an open-source training recipe for GPT-OSS-20B, a 20-billion-parameter mixture-of-experts (MoE) model, on the MLPerf Small MoE Training benchmark under the MXFP4 microscaling format. The recipe combines established techniques from Abecassis, Felix et al. [arXiv:2509.25149] (hybrid 1D/2D block quantization, randomized Hadamard transforms, and stochastic rounding) with a simplified weight de-oscillation scheme adapted from TetraJet-v2 [arXiv:2510.27527]. On C4 validation at global batch size 16, MXFP4 + RHT + SR + de-oscillation reaches a validation loss of 3.3350 at 16,128 steps, only 0.007 above the BF16 baseline (3.3283), closing roughly 50% of the gap left by MXFP4 without de-oscillation (3.3418). Measured by steps to reach the MLPerf quality target (validation loss 3.34), de-oscillation cuts the FP4 convergence overhead relative to BF16 from +20.0% to +5.0%. We also report negative end-to-end results from differential gradient estimation, outlier clipping, and macro-block scaling, despite each showing operator-level SNR gains. All experiments use simulated MXFP4 kernels on AMD MI300X hardware and wall-clock speed has not been optimized.

0.26

FP4Quant: Efficient 4-Bit Communication Compression for Model-Parallel LLM Training

cs.AI ·2026-11-03 ·Man Liu, Xingchen Liu, Hairui Zhao, Guangming Tan, Dingwen Tao
published similarity 0.69
Abstract · 5 figures, 3 tables, accepted by IFIP NPC 2026

The rapid scaling of large language models (LLMs) has made communication overhead a critical bottleneck in distributed model-parallel training. Although existing low-precision compression methods can effectively reduce communication costs, further reducing the communication footprint to ultra-low-bit formats such as FP4 introduces new challenges, including limited numerical range, sub-byte storage overhead, and increased computational cost from fine-grained quantization. In this paper, we present \textbf{FP4Quant}, a micro-grouped FP4 compression framework for efficient model-parallel LLM training. FP4Quant integrates a micro-grouped dual-scale FP4 quantization mechanism to preserve local tensor distribution characteristics, a warp-cooperative FP4 packing scheme to enable efficient sub-byte data representation, and a hybrid two-level FWHT pipeline to mitigate quantization errors with GPU-aware execution optimization. Experiments on NVIDIA H100 GPUs with Qwen-7B demonstrate up to 1.56$\times$ end-to-end throughput improvement over BF16, revealing a trade-off between throughput and model quality.

0.28

Replay the Curvature: Accurate and Scalable NVFP4 Quantization for Large Language Model Inference

cs.LG cs.CLcs.DC ·2026-09-29 ·Ruiyi Ding, Jie Li, Kang He, Ziyan Liu, Chengru Song +2 more
similarity 0.68
Abstract · 33 pages

Large language models make weight storage and memory traffic major inference costs, motivating low-precision formats that represent each weight with only a few bits. Such formats use a scale to map floating-point values into a small codebook; NVFP4 improves local range utilization by letting every 16 E2M1 weights share an E4M3 block scale. Choosing that scale is difficult in GPTQ because quantizing one column updates those that follow, so evaluating a block independently can misestimate its final reconstruction error. Large models pose a second challenge: full-precision weights, calibration activations, and second-order state cannot all remain on one accelerator, while assigning complete layers to devices leaves each time-consuming layer solve serial. We introduce \emph{Schur Replay}, a scale-selection algorithm that reproduces the GPTQ updates caused by each block scale and scores the resulting block error after accounting for compensation from unquantized columns. Separately, our execution infrastructure keeps only the active layer resident, tiers activations across device, host, and disk, retires full-precision layers after export, and distributes independent output rows across tensor-parallel ranks. Together, the algorithm and infrastructure attain $99.35\%$ and $100.84\%$ question-weighted recovery from BF16 across seven benchmarks on Qwen3.5-397B-A17B and Llama-3.3-70B-Instruct. On the 397B model, the infrastructure reduces measured per-layer time by $15.17\times$ over ModelOpt and $23.14\times$ over LLM Compressor, with lower memory used per GPU.

0.15

Mixed Precision Scaling Laws for Quantized Pretraining

cs.LG ·2026-10-13 ·Jinuk Kim, Rajarshi Saha, Muhammed Fatih Balin, Youngsuk Park
similarity 0.68
Abstract · Preprint

Since scaling laws were introduced for modern LLMs (Kaplan et al., 2020), several works have extended them to account for quantization, tracking the emerging low-precision data types supported on AI accelerators. We develop a more accurate scaling law for quantized pretraining with mixed precision across the forward and backward passes, grounded in optimization theory and validated empirically. Our formulation separates the effects of quantization on model capacity and on optimization efficiency, and explicitly models the persistent optimization error from forward and backward quantization identified through convergence analysis. To select the regimes for fitting and evaluating our law, we first decompose existing 4-bit training recipes into their forward and backward components, isolating those that most affect loss. Our Qwen3 experiments under selected 4-bit regimes, together with published Llama-style experiments, show that our law predicts loss with up to $11\times$ lower MSE than existing laws as model size and token count scale. Finally, we extend our law to layer-wise mixed precision and identify the optimal quantized-pretraining recipe, i.e., model size, training tokens, and per-layer forward/backward precision, under a hardware-aware compute budget. Unlike prior precision scaling laws, our law predicts that the optimal precision increases with the compute budget.

0.06

SoScale: Second-Order Scale Search for FP4 Quantization

cs.LG cs.AI ·2026-11-12 ·Pengxiang Zhao, Xing Li, Hui-Ling Zhen, Weizhe Lin, Xianzhi Yu +1 more
similarity 0.68
Abstract

Low-bit quantization reduces the memory footprint and inference cost of large language models (LLMs), yet accurate FP4 quantization remains challenging. Practical formats such as MXFP4, NVFP4, and HiF4 pair a 4-bit floating-point payload with block-wise or hierarchical scale codes, making accuracy highly sensitive to how each local distribution is scaled. Default maximum-absolute-value scaling preserves dynamic range, but can spend scarce FP4 levels on rarely occupied outlier regions and leave dense tensor values poorly resolved. Existing scale-search methods minimize local element-wise reconstruction error, optimizing tensor fidelity rather than layer-output fidelity. We propose SoScale, a second-order weight scale-code search method for hierarchical FP4 quantization. SoScale searches hardware-valid scale codes under a Hessian-aware layer reconstruction objective and couples this search with GPTQ-style error recovery, selecting scales by their impact on layer outputs. Across Qwen3 models, SoScale consistently reduces downstream quantization degradation under MXFP4, NVFP4, and HiF4.

0.04

Gradient-Guided Hardware-Native MIXFP4

cs.LG cs.AI ·2026-11-12 ·Jian-Jia Chen, Brian J. Chan, Wen-Hung Lee, Yi-Ting Li, Po-Shen Chen +6 more
code/data similarity 0.67
Abstract

Blackwell tensor cores support native inference with 4-bit weights and activations (W4A4), but NVFP4 leaves a perplexity (PPL) gap to BF16. Choosing a format for each 16-element block can improve accuracy, but current matrix multiply instructions cannot execute choices this fine. Applying these rules at hardware-compatible tiles loses most of their benefit. We introduce FlipQuant, which selects E2M1 or E0M3 for each MMA weight tile. It keeps both quantized weight candidates fixed and learns a binary format map from end-to-end gradients of a bucketed KL loss to a BF16 teacher, re-evaluating them after each update. Native kernels execute 16 x 64 tiles on SM120 and 256 x 64 tiles on SM100 with median GEMM overheads of 1.9% and 1.7%, respectively. Across six language models and two corpora, FlipQuant at 16 x 64 closes 42.5% of NVFP4's PPL gap to BF16 on average, compared with 13.3% for FourOverSix. Code is available at https://github.com/brian030128/flipquant.

0.30