CS Paper Radar

Monophonic Audio Synthesizer Using FPGAs

Michael Smith, D. G. Perera

cs.AR cs.SD ·submitted 2026-08-10 18:33 UTC · v1

Abstract

Signal synthesis is used in every aspect of the electronics world, where sinusoidal waveforms are used to perform functions such as clocking, signal transmission, feedback controls, and other applications. Digital synthesis is the method of approximating sinusoidal waveforms using digital logic, where the waveform is approximated to an accurate degree at a specific frequency which can be either implemented digitally or converted into the analog domain for use elsewhere. This project details the creation of a digital synthesizer commonly used for professional audio applications through the implementation of hardware in an FPGA.

Comment
16 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Alias-Free Oscillator Synchronization via Additive Synthesis

eess.AS eess.SP ·2026-08-27 ·Jonas Roth, Domenic Keller, Oscar Castañeda, Christoph Studer
publishedunusual similarity 0.54
Abstract · To be presented at DAFx26

Oscillator synchronization is a widely used sound-synthesis technique, but straightforward digital implementations suffer from aliasing artifacts. This paper presents an alias-free method for digital emulation of oscillator synchronization of arbitrary periodic waveforms based on additive synthesis. Starting from a finite set of Fourier-series coefficients representing a bandlimited free-running waveform, we derive linear spectral-resampling transforms that map these coefficients to those of the bandlimited synchronized waveform. Beyond conventional hard synchronization, the proposed approach also supports two additional soft-synchronization modes. To address the high computational complexity of the proposed method, we introduce HASY, a 6 mm^2 application-specific integrated circuit (ASIC) fabricated in 65 nm CMOS technology. HASY generates one 96 kHz, 24 bit alias-free synchronized waveform with up to 512 harmonics and computes the spectral-resampling transform within only five audio-sample periods.

0.32

A Frequency-Domain Artificial Reverberator Plug-In

eess.AS ·2026-08-27 ·Jonas Roth, Nishanth Kumar, Silvan Krebs, David Wieland, Christoph Studer
publishedcode/data similarity 0.52
Abstract · To be presented at DAFx26

We present FDverb, a frequency-domain artificial reverberator, based on the idea of a vocoder with a noise carrier signal. Using a short-time Fourier transform (STFT) for analysis and synthesis, FDverb generates late reverberation by weighting spectral noise components with envelopes. We extend FDverb with early reflections, nonlinear decay, and pitch shifting. These extensions enable creative sound-design applications. We provide FDverb as an open-source DAW plug-in, using the JUCE framework.

0.42

Learned Continuous Synthesis of Quadratic Difference Tone Spectra

cs.SD ·2026-09-09 ·Esteban Gutiérrez, Behzad Haki, Christopher Haworth, Xavier Serra, Rodrigo Cádiz
published similarity 0.51
Abstract · Accepted at the AI Music Creativity (AIMC) 2026 Conference held in Berlin, Germany. 8 pages and 3 figures

Quadratic difference tones (QDTs) are a species of auditory distortion product in which a "phantom" pure tone, absent from the acoustic signal, is clearly audible to listeners. Exploiting this phenomenon, one can synthesize harmonically rich tones for musical purposes, a technique called Quadratic Difference Tone Spectrum (QDTS) synthesis. Previous works have introduced numerical methods to synthesize QDTS based on the distortion function, which links a target QDTS and an overtone-structured carrier signal. While accurate, these methods were stochastic and discontinuous, making them difficult to control for musical purposes and effectively limiting them to stationary signals. This paper proposes a neural network-based approach that learns an approximate inverse of the distortion mapping in an autoencoder-like configuration, producing a continuous approximation that addresses prior limitations. Experimental results show that, although slightly less numerically precise, the method is sufficient for perceptual and musical applications. We also implement a real-time version in Max and evaluate its performance. Various sound examples demonstrate its expressive and musical potential. The source code, audio examples, tutorials, and software accompanying this work are available at https://cordutie.github.io/projects/qdts.html

0.52

Arbitrary Polygon Oscillator: Generalizing Polygonal Synthesis to Arbitrary Shapes, Morphing, and Three-Dimensional Polyhedra

cs.SD cs.CL ·2026-08-25 ·Antonio Argentieri, Francesco Scagliola
publishedunusual similarity 0.49
Abstract · Accepted at 29th International Conference on Digital Audio Effects September 1 - 4, 2026 MIT, Cambridge, MA, USA

Polygonal synthesis generates audio by traversing the perimeter of a polygon with a phasor; prior work uses a constant angular velocity, whereas the proposed system adopts constant arc-length (perimeter) velocity. Existing formulations operate on regular, parametrically defined polygons, producing smooth timbral transitions within a single family of shapes. This paper generalizes polygonal synthesis around a unified arc-length engine: vertex data of any origin feed the same DSP pipeline. First, we adapt the oscillator to accept arbitrary vertex configurations from an external buffer, opening the possibility for a broad class of closed polygons -- regular, irregular, or star-shaped -- to function as a waveform generator. Second, a hybrid interpolation algorithm enables smooth morphing between polygons with unequal vertex counts, passing through intermediate shapes that have no parametric description. Third, we extend the paradigm to three dimensions: a convex polyhedron rotated about three axes is sliced by a fixed horizontal plane, and the resulting cross-section yields a continuously variable polygon controlled by the solid's orientation. The system runs in RNBO (Cycling~'74) with a geometry caching strategy that avoids per-sample recomputation. Antialiasing combines a four-point polyBLAMP correction derived from runtime Bézier tangents with adaptive oversampling, adapting the correction geometrically to general vertex configurations without per-shape analytical derivation.

0.32

Differentiable Digital Signal Processing Mixture Model-Guided Diffusion for Synthesis Parameter Estimation from Harmonic Sound Mixtures

cs.SD eess.AS ·2026-09-13 ·Kengo Takemoto, Tomohiko Nakamura, Hiroshi Saruwatari
publishedhot direction similarity 0.47
Abstract · 6 pages, 3 figures, Accepted for APSIPA Annual Summit and Conference 2026

A differentiable digital signal processing (DDSP) autoencoder reconstructs a monophonic harmonic sound through three types of synthesis parameters: fundamental frequency, loudness, and timbre features. To handle mixtures of harmonic sounds within the DDSP approach, we have previously proposed a DDSP mixture model (DDSPMM). It represents a mixture as the sum of source signals synthesized by the decoders of pretrained DDSP autoencoders. Although DDSPMM enables direct estimation of synthesis parameters of each source from mixtures, it does not explicitly model temporal variations in the synthesis parameters and can produce excessive temporal fluctuations. In this paper, we propose a method for estimating synthesis parameters with temporally plausible trajectories by incorporating a denoising diffusion probabilistic model (DDPM) into the DDSPMM-based estimation. The DDPM is trained as a generative model of synthesis parameters. During estimation, the proposed method guides the DDPM reverse diffusion process with the reconstruction error between the observed mixture and the mixture synthesized by DDSPMM from the current estimates. Experiments on woodwind and string instrument ensembles showed that the DDPM-based regularization improves synthesis parameter estimation by imposing temporal plausibility on the estimated trajectories.

0.46

Real-Time Arbitrary Resampling for Phase-Continuous Microtuning in Audio Streams

cs.SD ·2026-11-08 ·Andreas Falkenberg
similarity 0.46
Abstract · 6 pages, 1 figure

This paper develops an output-driven resampling formulation for fine pitch adjustment of recorded signals. A fractional input-position increment combines the desired frequency ratio with independently specified input and output sample rates. Each output sample is evaluated from neighboring input samples, and gradual rate changes preserve the current input position. Musical interval mapping and direct sine synthesis are treated as distinct layers. The formulation separates tuning resolution, numerical accuracy, interpolation quality, and streaming correctness. Optional rational-factor representations use freely chosen approximation parameters; numerical illustrations do not define constants required by the algorithm. Linear interpolation provides a low-cost evaluation kernel but does not establish a universal signal-quality or frequency-accuracy guarantee.

0.27

CTAG-FX: Reinterpreting Synthesizer Parameter Spaces for Expressive Tone-Shaping Audio FX Design

eess.AS cs.SD ·2026-10-06 ·Geonung Jo, Jongeun Choi
similarity 0.45
Abstract · 8 pages, 8 figures, 3 tables

Recent text-guided audio FX research has focused on translating natural-language descriptions into parameters or chain configurations within existing FX systems. However, comparatively little attention has been paid to how the internal control space of an individual FX processor can itself be constructed. To address this gap, we propose CTAG-FX, which functionally reinterprets the roles of 78 parameters in a text-conditioned synthesizer configuration as controls of a tone-shaping FX processor. Each synthesizer configuration defines a fixed tone-shaping processor that can be repeatedly applied to new audio inputs rather than producing only a one-off rendered output. The text-conditioned synthesizer configurations are generated using A&R-CTAG, a retrieval-enhanced extension of CTAG. We evaluate CTAG-FX through signal-level analysis, together with a scrambled-mapping ablation in which parameter-to-control assignments are randomly permuted to assess the contribution of the proposed role assignment. Role-based mapping produces prompt-distinct spectral and nonlinear behavior, whereas scrambling reduces this prompt-specific differentiation and yields a more prompt-insensitive nonlinear profile. Overall, these results suggest that synthesizer parameter spaces can serve not only as sound-generation spaces but also as design resources for constructing new audio-FX control spaces. Audio samples are available at https://taylor3527eg-hub.github.io/ctag-fx-platform-demo/.

0.33

Exhaustive Evaluation of Fixed-Point Reciprocal Architectures for FPGAs

cs.AR ·2026-11-15 ·Navaneeth Kutty, Anish Murali, Iacovos Ioannou, Priyan Mariappan, Prabagarane Nagaradjane
similarity 0.45
Abstract · 27 pages, 11 figures

Fixed-point reciprocals are used in normalization and division on field-programmable gate arrays (FPGAs). Designs that share an output format can differ in worst-case error and in their need for memory and multipliers. The effect of table width, internal precision and refinement was evaluated for reciprocal computation in the Q16.16 and Q8.24 formats. Every representable input in the interval from 0.5 to 2.5 was tested against an exact integer reference. Five arithmetic paths were reconstructed from register-transfer-level source. Guarded interpolation, Newton-Raphson refinement and residual correction were then evaluated alongside polynomial and digit-recurrence baselines. Correct rounding was verified for all 131,073 Q16.16 and 33,554,433 Q8.24 inputs by adding one residual check to a guarded interpolated seed and one refinement step. An implementation with product reuse was verified at one input per cycle with a latency of 10 cycles in both formats. The Q8.24 implementation used nine digital signal processing slices in 7 series synthesis. The exact radix-2 control used no such slices and had a latency of 28 cycles. The reconstructed refined paths reduced the maximum relative error by factors of 205 to 223 when eight fractional bits were added. The evaluated designs provide reproducible choices for fixed accuracy budgets. In particular, correct rounding can be obtained on the tested interval by using a compact seed and checking the integer residual before the result is returned.

0.24