CS Paper Radar

Alias-Free Oscillator Synchronization via Additive Synthesis

Jonas Roth, Domenic Keller, Oscar Castañeda, Christoph Studer

eess.AS eess.SP ·submitted 2026-08-27 19:36 UTC · v1
publishedunusual

Abstract

Oscillator synchronization is a widely used sound-synthesis technique, but straightforward digital implementations suffer from aliasing artifacts. This paper presents an alias-free method for digital emulation of oscillator synchronization of arbitrary periodic waveforms based on additive synthesis. Starting from a finite set of Fourier-series coefficients representing a bandlimited free-running waveform, we derive linear spectral-resampling transforms that map these coefficients to those of the bandlimited synchronized waveform. Beyond conventional hard synchronization, the proposed approach also supports two additional soft-synchronization modes. To address the high computational complexity of the proposed method, we introduce HASY, a 6 mm^2 application-specific integrated circuit (ASIC) fabricated in 65 nm CMOS technology. HASY generates one 96 kHz, 24 bit alias-free synchronized waveform with up to 512 harmonics and computes the spectral-resampling transform within only five audio-sample periods.

Comment
To be presented at DAFx26

Closest papers

Nearest neighbours by meaning across the whole index.

Monophonic Audio Synthesizer Using FPGAs

cs.AR cs.SD ·2026-08-10 ·Michael Smith, D. G. Perera
similarity 0.54
Abstract · 16 pages, 3 figures

Signal synthesis is used in every aspect of the electronics world, where sinusoidal waveforms are used to perform functions such as clocking, signal transmission, feedback controls, and other applications. Digital synthesis is the method of approximating sinusoidal waveforms using digital logic, where the waveform is approximated to an accurate degree at a specific frequency which can be either implemented digitally or converted into the analog domain for use elsewhere. This project details the creation of a digital synthesizer commonly used for professional audio applications through the implementation of hardware in an FPGA.

0.10

Real-Time Arbitrary Resampling for Phase-Continuous Microtuning in Audio Streams

cs.SD ·2026-11-08 ·Andreas Falkenberg
similarity 0.51
Abstract · 6 pages, 1 figure

This paper develops an output-driven resampling formulation for fine pitch adjustment of recorded signals. A fractional input-position increment combines the desired frequency ratio with independently specified input and output sample rates. Each output sample is evaluated from neighboring input samples, and gradual rate changes preserve the current input position. Musical interval mapping and direct sine synthesis are treated as distinct layers. The formulation separates tuning resolution, numerical accuracy, interpolation quality, and streaming correctness. Optional rational-factor representations use freely chosen approximation parameters; numerical illustrations do not define constants required by the algorithm. Linear interpolation provides a low-cost evaluation kernel but does not establish a universal signal-quality or frequency-accuracy guarantee.

0.27

Exact Factorisation and Fast Computation of Invertible Constant-Q Transforms

eess.SP cs.SDeess.ASmath.NA ·2026-09-24 ·Facundo Franchino, Eloi Moliner, Vesa Välimäki
similarity 0.50
Abstract · 5 pages, 2 figures, 2 tables. Submitted to ICASSP 2027

The constant-Q transform (CQT) represents audio on a logarithmic frequency axis. Its nonstationary Gabor formulation is exactly invertible, but the unequal numbers of time coefficients in its bands complicate GPU computation. An exact factorisation combines spectral selection, conjugation, windowing, and reordering into a fixed map between one packed Fourier transform and the shorter band inverse transforms. The factors give waveform reconstruction, real adjoints for backpropagation, and bounds on arithmetic depth and block width; overlapping slices permit streaming with bounded memory. Tests on two GPU models show that Flash-CQT reduces analysis-synthesis round-trip time by factors of two to eight relative to a baseline computing the same CQT. The proposed implementation also uses over 30% less peak temporary workspace and reaches a negligible reconstruction error, with a signal-to-noise ratio of about 130 dB, in single-precision floating-point arithmetic. These advances make Flash-CQT a practical, computationally efficient front end for spectral analysis and modern audio machine-learning systems.

0.28

Ambisonics: Introducing an Accessible, Distributed Approach

cs.SD eess.AS ·2026-10-29 ·Thomas A Rushton, Romain Michon, Tanguy Risset, Clemens Wegener, Pierre Lecomte
publishedunusual similarity 0.50
Abstract

This paper presents an accessible, distributed approach to higher order ambisonics using a network of low-cost microcontroller-based devices. Leveraging recent advances in embedded computing, networked audio, and precise time synchronization, the system offers an alternative to conventional centralized architectures that typically require expensive multichannel interfaces and high-performance digital signal processing hardware. The proposed architecture combines an audio plugin for soundfield design with a modular network of ambisonics processing units, which, exploiting the parallelisable nature of ambisonics decoding, are each responsible for a subset of loudspeaker outputs. Synchronization is achieved through the IEEE 1588 Precision Time Protocol, complemented by adaptive clock correction to maintain sub-microsecond alignment between devices. A third-order ambisonics implementation demonstrates the viability of the approach, with potential scalability to higher orders and larger arrays. Overall, this work contributes to the development of frugal, distributed solutions for immersive audio, expanding access to ambisonics-based systems for a wide range of applications.

0.41

A Timing-Robust Frequency-Interleaved ADC with Embedded Analog Fourier Transform

eess.SP ·2026-10-02 ·Xingchen Chao, Yunqiang Xu, Qiang Yu, Christian Adam, Qiang Li
similarity 0.49
Abstract

Timing errors represent a fundamental challenge in high-speed analog-to-digital converters (ADCs). This paper presents a frequency-interleaved architecture with inherent robustness to timing errors. The frequency interleaving is achieved by an embedded analog Fourier transform (AFT), allowing accurate channel spacing. The charge-based passive AFT is able to share the capacitor array with the capacitive DAC of the subsequent data conversion. A circuit implementation for the complex-valued irrational coefficients in the AFT matrix is proposed, which eliminates the device-ratio-induced systematic errors. Measured at 10b 13GS/s, the calibration-free ADC achieves 45.8-dB SNDR and 56.1-dB SFDR at Nyquist. The ADC consumes 26.4mA from a single 1V supply, resulting in a Walden FoM of 12.7 fJ/conv.-step.

0.25

HC-AINet: An Auditory-Inspired Network with Harmonic Compensation for Low-Complexity Speech Enhancement

eess.AS ·2026-10-22 ·Nan Li, Xiaoxiong Wu, Huawei Liu, Ziping Zhao
similarity 0.49
Abstract · 12 pages, 5 figures, 9 tables

Speech enhancement on resource-constrained devices requires noise suppression with limited computation and minimal loss of spectral detail. Auditory-inspired subband processing reduces computation, but its smooth gains have limited ability to distinguish harmonic peaks from neighboring noise. We propose a harmonic-compensated auditory-inspired network (HC-AINet) for low-complexity speech enhancement. A triangular equivalent rectangular bandwidth (ERB) filterbank supplies compact features to a lightweight network comprising inverted-residual units, temporal Conformer layers, and parallel frequency-gated convolutions. The network predicts global and harmonic gains together with fusion weights. A harmonic-location map derived from the noisy spectrum confines the harmonic contribution to selected bins on the original frequency grid, while the global branch controls the broader spectral envelope. The compensated magnitude, noisy phase, and a magnitude-derived minimum-phase cue jointly condition a compact phase estimator for waveform reconstruction. On VoiceBank-DEMAND, the 64-band model achieves a PESQ of 3.20 and a STOI of 0.95 with approximately 0.27 million parameters.

0.20

A Frequency-Domain Artificial Reverberator Plug-In

eess.AS ·2026-08-27 ·Jonas Roth, Nishanth Kumar, Silvan Krebs, David Wieland, Christoph Studer
publishedcode/data similarity 0.48
Abstract · To be presented at DAFx26

We present FDverb, a frequency-domain artificial reverberator, based on the idea of a vocoder with a noise carrier signal. Using a short-time Fourier transform (STFT) for analysis and synthesis, FDverb generates late reverberation by weighting spectral noise components with envelopes. We extend FDverb with early reflections, nonlinear decay, and pitch shifting. These extensions enable creative sound-design applications. We provide FDverb as an open-source DAW plug-in, using the JUCE framework.

0.42

Adaptive carrier signal synthesis for frequency-division multiplexed cryogenic detector readout

eess.SP physics.ins-det ·2026-11-12 ·Timo Muscheid, Benedikt Keppner, Daniel Crovo, Robert Gartmann, Marvin Fuchs +3 more
unusual similarity 0.45
Abstract · TWEPP26 Proceedings

Frequency-domain multiplexing is a fundamental technology for readout of cryogenic detector arrays on a single transmission line. Synthesizing a large number of static carrier tones for resonator stimulation eventually drives the cryogenic low-noise amplifier beyond its P1dB, introducing detector signal distortion. Scaling array sizes to O(10^6) detector pixels therefore demands minimizing the total power on the transmission line by continuous tracking of the resonances, which requires the readout electronics to be capable of updating the carrier tones dynamically. This work presents an scalable FPGA-based implementation for carrier signal synthesis based on a numerically controlled oscillator and a polyphase filter bank, enabling real-time frequency adaptivity as well as frequency resolution of 4 mHz to precisely tune the operating point, while simultaneously reducing resource usage compared to the current memory-based implementation.

0.25