CS Paper Radar

Adaptive carrier signal synthesis for frequency-division multiplexed cryogenic detector readout

Timo Muscheid, Benedikt Keppner, Daniel Crovo, Robert Gartmann, Marvin Fuchs, Lukas Scheller, Oliver Sander, Luis E. Ardila-Perez

eess.SP physics.ins-det ·submitted 2026-11-12 16:59 UTC · v1
unusual

Abstract

Frequency-domain multiplexing is a fundamental technology for readout of cryogenic detector arrays on a single transmission line. Synthesizing a large number of static carrier tones for resonator stimulation eventually drives the cryogenic low-noise amplifier beyond its P1dB, introducing detector signal distortion. Scaling array sizes to O(10^6) detector pixels therefore demands minimizing the total power on the transmission line by continuous tracking of the resonances, which requires the readout electronics to be capable of updating the carrier tones dynamically. This work presents an scalable FPGA-based implementation for carrier signal synthesis based on a numerically controlled oscillator and a polyphase filter bank, enabling real-time frequency adaptivity as well as frequency resolution of 4 mHz to precisely tune the operating point, while simultaneously reducing resource usage compared to the current memory-based implementation.

Comment
TWEPP26 Proceedings

Closest papers

Nearest neighbours by meaning across the whole index.

Compute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit Readout

cs.AR quant-phcs.ETeess.SP ·2026-11-17 ·Qirui Zhang, Ben Toby, He Wang, Benjamin Lienhard, David Blaauw +1 more
similarity 0.59
Abstract

We introduce DIRAC, an ADC-less in-cryostat qubit readout architecture that uses analog computing to redraw the analog-digital boundary. Directly operating on the front-end's analog output, passive complex mixers perform the equivalent of digital demodulation, ping-pong active-RC integrators average their outputs into down-sampled per-qubit traces, and a time-domain stage digitizes them, eliminating Nyquist-rate ADCs. A TX-RX co-design derives the mixers' local oscillators from the readout transmitter's baseband rather than per-tone PLLs. A per-line calibration flow trains the matched filter jointly with the neural network, improving fidelity and enabling low-bit-width, low-voltage digital processing. Designed in 22 nm FD-SOI and evaluated at 4 K on 1.12M experimental shots, DIRAC matches the fidelity of a floating-point (FP32) digital pipeline for readout windows down to 750 ns, at 31.6$\times$ and 238$\times$ lower energy than the fixed-point (FxP) and FP32 pipelines. It cuts the total 4 K power per physical qubit by 50.4% and 68.6% relative to FxP and room-temperature flex cables, respectively. At a fixed logical-qubit count and 4 K budget, this yields, against FxP, a code distance larger by 2 to 6 and a 1.6-7.3$\times$ (Willow) and 4.9-204$\times$ (SI1000, $p = 10^{-3}$) lower logical error rate.

0.26

Cryogenic Recharacterization of a Commercial 22 nm FD-SOI Foundry Standard-Cell Library

cs.AR quant-ph ·2026-10-18 ·Mohamed Gharib, Rami Rasheedi, Salma Abdelzaher, Henry Shi, Mike Hammer +4 more
similarity 0.50
Abstract · Submitted to the 2027 IEEE International Symposium on Circuits and Systems (ISCAS 2027)

Wiring and bandwidth bottlenecks between a quantum processor and room-temperature electronics can be reduced by placing digital control at the cryogenic stage, but commercial foundry standard-cell libraries are not specified for operation at 4 K. A cryogenic recharacterization flow is therefore developed for a commercial 22 nm FD-SOI foundry standard-cell library using commercially available cryogenic compact-device models, while retaining the original cell circuits, layouts, logic functions, and implementation semantics and remaining compatible with the commercial synthesis, place-and-route, and signoff methodology used at room temperature. Body-bias dependence is quantified over 38,640 matched slew/load points at zero, +/-0.9 V, and +/-1.8 V body bias. Relative to full bias, zero-bias operation increases the median rising and falling delays by 38.6x and 33.0x, while approximately 90% of transitions exceed the foundry-defined maximum-transition envelope. The 0.8 V-to-0.4 V level shifter is even more sensitive to body bias: its worst-case falling delay decreases from 30.6 ns at zero bias to 0.56 ns at +/-1.8 V. For the outbound 0.4 V-to-0.8 V crossing, driving the 0.8 V receiver without a level shifter dissipates 57.7 uW of static power per bit at full bias, against 0.196 nW when level-shifted. In post-route analysis of the unchanged extracted physical database of a fabricated 32-bit ALU, the register-to-register setup boundary increases from 1.3 MHz at zero bias to 37.9 MHz at +/-0.9 V and 132.9 MHz at +/-1.8 V.

0.51

Precision and resource scaling of real-time flux distortion compensation for superconducting quantum control

cs.AR quant-ph ·2026-09-23 ·Qi Zhou, Zi-Hao Mei, Peng Duan, Peng Wang, Liang-Liang Guo +5 more
similarity 0.50
Abstract · 17 pages, 9 figures

Real-time waveform generation supports dynamic quantum circuits without pre-storing complete waveforms for every execution path. However, long-lived distortions in flux-control lines degrade gate fidelity, requiring compensation to account for the actual pulse history. A frequency-domain inversion and time-domain fitting method is proposed for resource-efficient real-time flux distortion compensation. The method fits the reconstructed compensation impulse response with a compact hybrid infinite impulse response (IIR) and finite impulse response (FIR) filter. Look-ahead parallelization enables this filter to process synthesized waveforms at 1.2GSa/s on a field-programmable gate array (FPGA). Two-qubit cross-entropy benchmarking shows that real-time IIR filtering achieves a median controlled-Z Pauli fidelity close to the software-reference value of 99.57%. Numerical analysis and FPGA synthesis indicate approximately logarithmic growth in hardware resource use with compensation timescale. Extending compensation from microsecond to hundred-microsecond timescales increases look-up table (LUT) and digital signal processing (DSP) resource use by only about 14% and 4%, respectively, while maintaining a relative arithmetic error below $10^{-4}$. This work provides a scalable hardware foundation for high-fidelity flux control in dynamic superconducting quantum circuits.

0.26

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.49
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35

A single-precision floating-point systolic Givens-QRD Triangular Solver for MVDR Beamforming

cs.AR eess.SP ·2026-09-02 ·Athi Ram R S, Alwin A, S. G. Sreejeesh, J. U. Kidav
similarity 0.48
Abstract · 18 pages, 14 figures, 18 tables

Computation of adaptive beamforming weights in Minimum Variance Distortionless Response (MVDR) processing is a latency-critical operation that poses significant challenges for real-time hardware implementation. This paper presents an FPGA implementation of a systolic Givens-rotation QR decomposition pipeline for MVDR beamforming on a simulated 32-element ultrasound transducer array, using single-precision floating-point arithmetic. The design is deployed on a Zynq UltraScale+ FPGA at 100 MHz with three parallel kernel instances operating concurrently, achieving a measured throughput of 31,123 weight vectors/s at 90.9% parallel efficiency relative to the measured single-instance rate. At an estimated 2.451 W of programmable-logic power, and 5.286 W including the processing system, this corresponds to 12,698 and 5,888 weight vectors/s/W, respectively. Under a matched three-way dispatch, a 24-core Intel Xeon Gold 5220R at 2.20 GHz achieves 465,699 weight vectors/s at a measured 83.08 W package power, corresponding to 5,606 weight vectors/s/W. The FPGA therefore attains 2.3x the power-normalised throughput of the processor on a programmable-logic basis and 1.05x on a total on-chip basis. In contrast, the processor retains a raw throughput advantage of approximately 15x at this operating point. Numerical precision is validated against MATLAB float32 reference outputs from a Field II cyst phantom simulation, achieving a 100% pass rate with a root mean square error of 5.10x10^-7, confirming near-theoretical finite-precision behaviour without systematic bias.

0.38

A high-isolation wideband channelizer for MKID readouts: a custom HLS implementation on RFSoC

eess.SP astro-ph.IM ·2026-08-25 ·Alberto Hernandez Fernandez, David Diaz Martin, Jose Javier Diaz Garcia, Roger John Hoyland, Luis Fernando Rodriguez Ramos +2 more
publishedbenchmark similarity 0.48
Abstract · 18 pages, 7 figures. Submitted to the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS). Extended version of Proc. SPIE 1…

We present a high-performance channelizer for Microwave Kinetic Inductance Detectors (MKIDs), designed to mitigate spectral leakage and scalloping loss through a 50% overlapping polyphase filter bank (PFB). The design is implemented on a Xilinx Zynq UltraScale+ RFSoC ZCU111 using a custom design - primarily in Vitis High-Level Synthesis (HLS), with the time-critical output serializer and glue logic in VHDL - that processes a 4.096 GSPS input stream with a per-branch super-sample rate (SSR) of 16. Rather than relying on aggressive 512 MHz clocking and vendor IP cores, our split-path architecture computes the delayed and non-delayed polyphase branches concurrently, so that the bulk of the channelizer operates at a robust 256 MHz while a single 512 MHz subdomain is confined to the BRAM-to-FFT section. This architectural parallelism enables a deep 16-tap prototype filter that doubles the filter depth of comparable high-speed systems and substantially improves channel isolation. We report the complete internal architecture of the reordering engine that implements the overlap, including two implementation hazards not documented in prior art: a pipeline-stage skew affecting state toggles in HLS, and the state-preservation requirements of a restartable design. The 2/1 overlapped channel response is validated in simulation - recovering the ~3.9 dB scalloping loss of a critically sampled channelizer to below 0.1 dB across the full 2 MHz channel - and characterized systematically with a 100-tone batch frequency sweep, while the parent readout system has been operated cryogenically with an MKID array in an adiabatic demagnetization refrigerator (ADR), identifying individual resonators in total darkness. The result is a resource-efficient, high-isolation benchmark for wideband frequency-division-multiplexed readouts.

0.48

An Ultra-Low-Noise Tunable TIA in 45nm Silicon Photonics for Electro-Optical Ultrasound Data Acquisition

eess.SP eess.SY ·2026-11-06 ·Marziyeh Rezaei, Sridhar Singhal, Alp A. Derin, Soner Sonmezoglu, Sajjad Moazeni
unusual similarity 0.47
Abstract

This paper presents the design and experimental characterization of a 32-channel, WDM-compatible electronic-photonic receiver array fabricated in the GlobalFoundries 45nm monolithic silicon photonics process. Optimized for miniaturized, millimeter-scale electro-optical ultrasound data acquisition probes for broadband photo-acoustic imaging (PAI), the chip utilizes integrated micro-ring resonator (MRR) demultiplexers and photodiode (PD) arrays to decode multi-wavelength acoustic signals outside the body. This work focuses specifically on the comprehensive characterization of the receiver front-end, evaluating both the optical WDM filter bank and the transimpedance amplifier (TIA) performance. Monolithic co-integration minimizes critical photodiode-to-TIA interface parasitics. The TIA incorporates a DC-offset cancellation loop that compensates for photodiode-induced offset currents while providing tunable low-frequency cutoff control over a range of 30 kHz to 1.5 MHz. This tunability enables effective suppression of flicker noise and improves overall signal integrity. The front-end achieves the peak transimpedance gain of 144 dB$Ω$ while maintaining an ultra-low input-referred noise current density of $1\text{ pA}/\sqrt{\text{Hz}}$, demonstrating a highly scalable architecture for high-sensitivity intravascular and endobronchial imaging.

0.29

A 140.5$μ$W, 99.8% Accuracy, 96.1dB SNR BioZ IC for Real-Time Cell Analysis with On-Demand Push-Pull Excitation and Continuous-Time $ΔΣ$ T-D Readout

eess.SP ·2026-10-24 ·Jiayang Li, Junzhe Chen, Xin Zhang, Peiqing Li, Liwen Zhang +13 more
published similarity 0.47
Abstract · Accepted for publication in ISSCC 2027, Paper 12.6. 8 pages, 7 figures

This paper presents a bioimpedance IC combining an on-demand push-pull driver and continuous-time $ΔΣ$ T-D readout to address the trade-off between SNR, accuracy and power consumption. The driver delivers 200$μ$App with $\leq$0.14% THD while consuming 80.3$μ$A. Using a 6MHz clock, the readout achieves 53.6ps effective timing resolution at a 4k$Ω$ load (0.1-4Hz noise integration). The IC achieves 96.1dB peak SNR, 99.8% magnitude accuracy and 0.13$^{\circ}$ phase error at a maximum power consumption of 140.5$μ$W.

0.35