CS Paper Radar

FIREQ: FPGA Instrumentation for Readout and Qubit control

Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone, Deborah Volpe, Angelo Nucciotti, Roldolfo Carobene, Claudio Gatti, Andrea Giachero, Fabrizio Riente

eess.SY quant-ph ·submitted 2026-08-29 18:55 UTC · v2
code/data

Abstract

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

Comment
15 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A high-isolation wideband channelizer for MKID readouts: a custom HLS implementation on RFSoC

eess.SP astro-ph.IM ·2026-08-25 ·Alberto Hernandez Fernandez, David Diaz Martin, Jose Javier Diaz Garcia, Roger John Hoyland, Luis Fernando Rodriguez Ramos +2 more
benchmark similarity 0.62
Abstract · 18 pages, 7 figures. Submitted to the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS). Extended version of Proc. SPIE 1…

We present a high-performance channelizer for Microwave Kinetic Inductance Detectors (MKIDs), designed to mitigate spectral leakage and scalloping loss through a 50% overlapping polyphase filter bank (PFB). The design is implemented on a Xilinx Zynq UltraScale+ RFSoC ZCU111 using a custom design - primarily in Vitis High-Level Synthesis (HLS), with the time-critical output serializer and glue logic in VHDL - that processes a 4.096 GSPS input stream with a per-branch super-sample rate (SSR) of 16. Rather than relying on aggressive 512 MHz clocking and vendor IP cores, our split-path architecture computes the delayed and non-delayed polyphase branches concurrently, so that the bulk of the channelizer operates at a robust 256 MHz while a single 512 MHz subdomain is confined to the BRAM-to-FFT section. This architectural parallelism enables a deep 16-tap prototype filter that doubles the filter depth of comparable high-speed systems and substantially improves channel isolation. We report the complete internal architecture of the reordering engine that implements the overlap, including two implementation hazards not documented in prior art: a pipeline-stage skew affecting state toggles in HLS, and the state-preservation requirements of a restartable design. The 2/1 overlapped channel response is validated in simulation - recovering the ~3.9 dB scalloping loss of a critically sampled channelizer to below 0.1 dB across the full 2 MHz channel - and characterized systematically with a 100-tone batch frequency sweep, while the parent readout system has been operated cryogenically with an MKID array in an adiabatic demagnetization refrigerator (ADR), identifying individual resonators in total darkness. The result is a resource-efficient, high-isolation benchmark for wideband frequency-division-multiplexed readouts.

0.38

Time-Deterministic and Instruction-Dynamic Execution: A field-programmable gate array quantum-control processor

cs.AR quant-ph ·2026-08-15 ·Xiaoqin Luo, Jiayun Song, Xiaolu Su
published similarity 0.61
Abstract · 15 pages, 4 figures

Long-running quantum computations, including error-corrected workloads, demand instruction availability, measurement-dependent control, and calibration updates. We present Time-Deterministic and Instruction-Dynamic Execution, an FPGA quantum-control processor supporting runtime revision at both instruction and parameter levels. Dynamic Instruction Parameter Update supplies one-shot, next-match patches before parameter capture, while Dynamic Instruction Stream Overwrite provides guarded replacement, logical deletion, and out-of-line insertion in eligible future regions of a resident program. A moving fetch-visibility guard coordinates instruction updates with execution, and event commitment isolates complete descriptors for independent hardware-timed dispatch. Revision applicability depends on update timing and execution progress; deterministic service applies to committed events under the stated scheduling conditions. The Xilinx ZCU102 implementation uses a 250-MHz control core and a 425-MHz timing/update domain. FPGA-resident measurements at the registered digital interfaces confirmed programmed-cycle dispatch for all tested descriptors committed at least one timing-domain cycle before their timestamps, with downstream ready and the stated FIFO ordering conditions. Separate tests confirmed post-commit timestamp and payload invariance. The minimum all-success mapped DIPU margin was four control-domain cycles, and a replacement of L instruction words completed in L+5 update-domain cycles under continuous payload delivery. Within the tested guard-distance range, rejected DISO requests reported an error and preserved the resident path, whereas all admitted revisions tested here executed complete revised sequences. These results provide a hardware execution basis for incorporating runtime-generated sequences and parameter corrections into precisely timed quantum computations with feedback.

0.58

Gateway-Free Kafka Streaming from FPGA-Based Detectors: A Bare-Metal Pipelined Producer on Zynq-7000

cs.NI cs.AR ·2026-11-17 ·Fernanda Zapata Bascuñán, Matías Hampel
published similarity 0.59
Abstract · Accepted for pucblishing at IEEE Explore proceedings of ARGENCON 2026

We present a bare-metal Apache Kafka producer implemented on a Zynq-7000 System-on-Chip (SoC) for event-driven data acquisition. Events are generated in Programmable Logic (PL), transferred to the Processing System (PS) through AXI4-Stream and AXI DMA, and published to a standard Kafka broker without an intermediate gateway computer. The PS constructs ProduceRequest messages and transmits them through the lwIP raw TCP/IP API. A configurable pipeline limits the number of outstanding Kafka requests. Pipeline depths of D = 1, 2, 4, and 8 were evaluated with two independent DMA sources. For each depth, 20 independent runs of 5,000 events were acquired, for 400,000 event records in total. Each event carries a 32-bit frame counter and a 32-bit PL timestamp. PS-side instrumentation records DMA start and completion, publication, successful local tcp_write() acceptance, and reception of the corresponding Kafka acknowledgement. Measurement records are exported to a separate Kafka topic after the timed event stream has completed. Each of the 80 runs contained 5,000 records with frame values from 0 to 4,999, with no sequence discontinuities in the exported metric records and no recorded Kafka errors. Mean operational throughput was approximately 5.3 kevents/s at D = 1, 9.4-9.6 kevents/s at D = 2, 16.2 kevents/s at D = 4, and 16.8-17.5 kevents/s at D = 8. The median publish-to-acknowledgement interval was 1.62-1.64 ms at D = 1, 0.98 ms at D = 2, 0.66 ms at D = 4, and 0.83-0.86 ms at D = 8. At D = 4, the corresponding P95 values were 0.81-0.83 ms.

0.35

Precision and resource scaling of real-time flux distortion compensation for superconducting quantum control

cs.AR quant-ph ·2026-09-23 ·Qi Zhou, Zi-Hao Mei, Peng Duan, Peng Wang, Liang-Liang Guo +5 more
similarity 0.58
Abstract · 17 pages, 9 figures

Real-time waveform generation supports dynamic quantum circuits without pre-storing complete waveforms for every execution path. However, long-lived distortions in flux-control lines degrade gate fidelity, requiring compensation to account for the actual pulse history. A frequency-domain inversion and time-domain fitting method is proposed for resource-efficient real-time flux distortion compensation. The method fits the reconstructed compensation impulse response with a compact hybrid infinite impulse response (IIR) and finite impulse response (FIR) filter. Look-ahead parallelization enables this filter to process synthesized waveforms at 1.2GSa/s on a field-programmable gate array (FPGA). Two-qubit cross-entropy benchmarking shows that real-time IIR filtering achieves a median controlled-Z Pauli fidelity close to the software-reference value of 99.57%. Numerical analysis and FPGA synthesis indicate approximately logarithmic growth in hardware resource use with compensation timescale. Extending compensation from microsecond to hundred-microsecond timescales increases look-up table (LUT) and digital signal processing (DSP) resource use by only about 14% and 4%, respectively, while maintaining a relative arithmetic error below $10^{-4}$. This work provides a scalable hardware foundation for high-fidelity flux control in dynamic superconducting quantum circuits.

0.26

VesperCSI: A High-Performance and Extensible CSI Acquisition Framework for Edge Wi-Fi Sensing

cs.NI cs.PFeess.SP ·2026-10-15 ·Kaan Baydemir, Sajjad Baghaee, Ilkay Ulusoy
code/data similarity 0.58
Abstract · 25 pages, 13 figures, 9 tables. Open-source implementation available at https://github.com/technicaluserx/vespercsi

Channel State Information (CSI) captures fine-grained changes in Wi-Fi channel propagation and provides a foundation for device-free sensing applications such as activity recognition, localization, and occupancy detection. The development of such applications depends on an acquisition system that can handle high-rate CSI streams while remaining extensible to the requirements of individual experiments. VesperCSI is an open-source, GPL-3.0-licensed redesign of FeitCSI for CSI acquisition with Intel AX200 and AX210 Wi-Fi interfaces. It targets high-rate acquisition on amd64 and aarch64 Linux hosts using fixed-capacity preallocated object pools and separate capture and consumer threads. A loadable plugin interface supports experiment-specific monitoring, storage, and processing. We evaluate VesperCSI and FeitCSI on Raspberry Pi CM4 receivers in a burst-traffic software crossover. At a 600-MHz all-core frequency ceiling and a target rate of 2500 frames/s, VesperCSI achieves mean sequence retention of 99.017-99.087% in 10,000-frame bursts, compared with 43.972-46.553% for FeitCSI. This ordering persists after exchanging the userspace programs between two receivers while retaining their respective drivers. The comparison therefore characterizes the tested software-and-driver packages rather than isolating userspace effects. These results support VesperCSI as a reusable acquisition component for edge-hosted Wi-Fi sensing under the evaluated workload and platform conditions.

0.50

Exploring and optimizing the Vivado Flow on large FPGA designs: A Practical Analysis of Strategies and Their Impact on Timing

cs.AR eess.SPhep-ex ·2026-10-28 ·Kachkachi Nor Eddine
similarity 0.56
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Achieving timing closure in FPGA designs is crucial, especially for high-performance applications. The Vivado Design Suite offers several strategies for optimization, but finding the best configuration for a given project remains challenging. This paper explores the various Vivado's timing directives and strategies to improve performance across timing, area, and runtime. Through two test-case designs, an NQR spectrometer SoC-FPGA and a digital readout ASIC prototype for high energy physics particle detector's, different strategies and configurations are compared to identify the most efficient flow.

0.34

SpinControl: Control Software for Prototyping and Benchmarking of Spin-Qubit Devices and Measurement Protocols

cs.SE quant-ph ·2026-10-16 ·Harold B. Meerwaldt, Daniël P. van der Velde, Pieter T. Eendebak, Michiel J. Haye
code/data similarity 0.56
Abstract · 11 pages, 8 figures

Quantum computers require software to control the states of the qubits. As the actions on qubits grow in complexity with circuit execution, calibration, and benchmarking, the complexity of the control software grows in tandem. Spin-qubit quantum computers are at a stage where experimentalists need low-level access for tuning and calibration, and quantum algorithm researchers want high-level circuit-level access. In this article, we present the software design of SpinControl. SpinControl integrates three architectural metrics: 1) customizability, to allow prototyping devices and measurement protocols, is achieved by separating data and behaviour; 2) modularity and extensibility are achieved by separating functionalities into different components; and 3) robustness, to reliably execute quantum circuits on many qubits, is achieved by CI pipelines and input validation. SpinControl allows different types of measurements while customizing the instruments used, the pulse or circuit program executed, and the data processing. It allows building standardized experiments from measurement and analysis building blocks and executing these for calibration in a custom and conditional order. SpinControl implements these functionalities alongside robust configuration and data management, a connection to the cloud, and calibration scheduling. Pulse and circuit compilation, virtual gate matrices, as well as spin-qubit-specific GUIs integrated by SpinControl, make heavy use of software packages developed by Delft University of Technology: pulse lib, core-tools (both open source), and QConstruct

0.41

MagiCFirm: A Runtime for Magic-State Cultivation with Algorithm-Hardware Co-Design

cs.AR quant-phcs.DC ·2026-09-24 ·Jubo Xu, Abbas B. Ziad, Prakash Murali, Hongxiang Fan
code/data similarity 0.55
Abstract

Magic-state cultivation offers a promising alternative for lowering the cost of non-Clifford operations in fault-tolerant quantum computing (FTQC). However, realizing cultivation in practice exposes two challenges: (i) the lack of an open-source classical runtime layer between logical software and physical control, and (ii) the latency constraints on protocol-specific decisions that determine magic-state readiness. To address these challenges, we adopt an algorithm--hardware co-design approach. At the algorithm level, we develop a two-stage early-escape scheme that identifies an informative subset of detectors offline, constructs a compact decoding problem, and performs partial decoding in parallel with complete decoding at runtime, allowing high-confidence attempts to advance before full decoding completes. At the hardware level, we present MagiCFirm, a configurable runtime that combines offline-compiled microprograms with dedicated datapaths for detector construction, event processing, and protocol control, enabling end-to-end execution of magic-state cultivation. Across evaluated configurations, MagiCFirm reduces wall-clock magic-state preparation time by up to 39.3% at matched logical error rate. For a representative magic-state-bound workload, this translates to an estimated 11% reduction in overall application runtime.

0.20