CS Paper Radar

Exploring and optimizing the Vivado Flow on large FPGA designs: A Practical Analysis of Strategies and Their Impact on Timing

Kachkachi Nor Eddine

cs.AR eess.SPhep-ex ·submitted 2026-10-28 10:07 UTC · v1

Abstract

Achieving timing closure in FPGA designs is crucial, especially for high-performance applications. The Vivado Design Suite offers several strategies for optimization, but finding the best configuration for a given project remains challenging. This paper explores the various Vivado's timing directives and strategies to improve performance across timing, area, and runtime. Through two test-case designs, an NQR spectrometer SoC-FPGA and a digital readout ASIC prototype for high energy physics particle detector's, different strategies and configurations are compared to identify the most efficient flow.

Comment
This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

SYNTLOG: FSM Benchmarks Evaluation for FPGA

cs.AR ·2026-08-24 ·Samary Baranov, Danila Gorodecky
benchmark similarity 0.56
Abstract

We introduce a curated benchmark collection of \num{101} FSM descriptions organized into five size classes (\emph{small}, \emph{medium}, \emph{large}, \emph{huge}, \emph{super-huge}), spanning tens to thousands of states and up to hundreds of inputs and outputs. Using these benchmarks we compare an architecture-independent synthesis tool SYNTLOG against Xilinx Vivado at the synthesis (technology-mapping) level, under six optimization strategies. We compare three post-synthesis parameters: number of LUTs, number of logic levels, and runtime. SYNTLOG in area-driven mode uses substantially fewer LUTs than Vivado's area baseline at every size ($-45\%$ to $-66\%$), and its delay-driven mode is simultaneously shallower in logic depth than Vivado's default synthesis mode. SYNTLOG synthesis includes embedded functional validation. Runtime of SYNTLOG is faster by one to two orders of magnitude than Vivado synthesis. The proposed tool synthesizes and validates every \emph{huge} and \emph{super-huge} circuit in minutes, whereas Vivado fails to terminate on these designs after hours.

0.21

Naviq: An Open-Source System-on-Chip Simulator for Rapid Prototyping, Verification, and Design Space Exploration

cs.AR ·2026-11-01 ·Scott Smith, Lukas Zscherpel, Alyssa Huang, Marissa Lanz, Deming Chen
publishedcode/data similarity 0.56
Abstract · 9 pages, 10 figures. This work is accepted to ASPDAC'27

Modern FPGA SoCs are no longer just collections of accelerators on top of a programmable fabric. They combine programmable logic with hardened processors, NoCs, and components that dominate end-to-end performance. Evaluating individual pieces is insufficient; system performance depends on the interplay of SoC components. However, current FPGA SoC simulations provide limited support for this style of evaluation. Vendor simulations capture these interactions but are prohibitively slow for iterative design-space exploration. At the same time, generic software models overly abstract the hardware components that determine real behavior, resulting in less accurate simulations. Fast, easy-to-use simulators that accurately model real SoCs are critical for system debugging and design space exploration. We present Naviq, an open-source, cycle-level software simulator for FPGA SoCs, tuned to AMD Versal-class architectures. Naviq bridges accurate but slow vendor simulation and fast software modeling: it captures key behaviors of modern commercial FPGA SoCs while being fast enough for debugging and design-space exploration. Naviq models hardened SoC infrastructure in C++ and integrates accelerators through Verilator, allowing designers to evaluate custom hardware in a full-system environment. At the center of Naviq is an AXI4-compliant NoC model that captures transaction ordering, packetization, routing, backpressure, and memory interactions. Naviq provides CPU and memory integration, protocol checking, checkpointing, tracing, and performance-analysis tools for debugging and design-space exploration. Experimental results show Naviq closely reproduces the bandwidth and latency of Vivado's RTL NoC model while accelerating the evaluated simulations by 81x-182x. We present five case studies demonstrating Naviq's capabilities. Naviq enables practical full-system evaluation of modern FPGA SoC designs.

0.38

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.56
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35

A high-isolation wideband channelizer for MKID readouts: a custom HLS implementation on RFSoC

eess.SP astro-ph.IM ·2026-08-25 ·Alberto Hernandez Fernandez, David Diaz Martin, Jose Javier Diaz Garcia, Roger John Hoyland, Luis Fernando Rodriguez Ramos +2 more
publishedbenchmark similarity 0.55
Abstract · 18 pages, 7 figures. Submitted to the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS). Extended version of Proc. SPIE 1…

We present a high-performance channelizer for Microwave Kinetic Inductance Detectors (MKIDs), designed to mitigate spectral leakage and scalloping loss through a 50% overlapping polyphase filter bank (PFB). The design is implemented on a Xilinx Zynq UltraScale+ RFSoC ZCU111 using a custom design - primarily in Vitis High-Level Synthesis (HLS), with the time-critical output serializer and glue logic in VHDL - that processes a 4.096 GSPS input stream with a per-branch super-sample rate (SSR) of 16. Rather than relying on aggressive 512 MHz clocking and vendor IP cores, our split-path architecture computes the delayed and non-delayed polyphase branches concurrently, so that the bulk of the channelizer operates at a robust 256 MHz while a single 512 MHz subdomain is confined to the BRAM-to-FFT section. This architectural parallelism enables a deep 16-tap prototype filter that doubles the filter depth of comparable high-speed systems and substantially improves channel isolation. We report the complete internal architecture of the reordering engine that implements the overlap, including two implementation hazards not documented in prior art: a pipeline-stage skew affecting state toggles in HLS, and the state-preservation requirements of a restartable design. The 2/1 overlapped channel response is validated in simulation - recovering the ~3.9 dB scalloping loss of a critically sampled channelizer to below 0.1 dB across the full 2 MHz channel - and characterized systematically with a 100-tone batch frequency sweep, while the parent readout system has been operated cryogenically with an MKID array in an adiabatic demagnetization refrigerator (ADR), identifying individual resonators in total darkness. The result is a resource-efficient, high-isolation benchmark for wideband frequency-division-multiplexed readouts.

0.48

LLM Agent-Based Design of RISC-V CPUs with FPGA-in-the-Loop Evaluation

cs.AR cs.AI ·2026-10-29 ·Leo Itoh, Junichiro Kadomoto
code/data similarity 0.54
Abstract · 5 pages, 6 figures, 2 tables. Submitted to IEEE ISCAS 2027. Code and data: https://github.com/kadomoto-lab/llm-cpu-fpga-loop

Long-run RTL simulation of CPU candidates can take hours, while short diagnostic runs may miss performance degradation that emerges later in execution. This evaluation cost can delay design decisions in LLM-agent-based CPU development. We present a development environment in which LLM agents implement CPU candidates on an FPGA and use on-board performance measurements to guide design decisions. We applied it to the human-supervised development of a single-cycle RV32I core into a three-wide out-of-order RV32IM core. The final design reaches 5.61 CoreMark/MHz at 130 MHz on a Artix-7 FPGA. For the same CPU candidate running 8,000 CoreMark iterations, FPGA evaluation, including implementation, was 9.6x faster than single-threaded RTL simulation. In one case, board measurements revealed long-run performance degradation in a candidate that improved in a short diagnostic run. The result guided candidate selection and led to RTL-based root-cause analysis and a fix.

0.37

Leveraging Industrial Foundation Models at the Edge of Particle Physics Detectors via Distillation Learning and Hardware Co-design

cs.LG physics.ins-dethep-ex ·2026-09-20 ·Gia Ancone, Qibin Liu, Liangyu Wu, Julia Gonski
similarity 0.53
Abstract · 7 pages, 1 figure, 1 table

Data acquisition (DAQ) systems at future particle physics experiments stand to benefit from the extremes of AI/ML development: large-scale foundation models can enhance the performance of feature extraction algorithms, and small-scale on-detector deployments can enable real-time intelligent data handling. This work provides the first fine-tuning of an industrial foundation model for particle physics DAQ. Starting from the backbone of Google Research's TimesFM (Time Series Foundation Model), we demonstrate fine-tuning on real-time regression tasks for drift chamber trackers and dual-readout calorimeters. Furthermore, the fine-tuned TimesFM model is distilled into a student and co-designed with FPGA implementation to enable these models to run in real-time at future colliders. The fine-tuned distillations meet or exceed the performance of previously published AI/ML solutions for each task. Further, the pipeline of distillation and model compression from TimesFM is generic and can be easily adapted to a variety of 1D waveform tasks across domains.

0.28

Benchmarking StreamNTT with a Verilog-to-Routing Toolchain

cs.AR ·2026-09-19 ·Wei He, Young-kyu Choi, Hyunwoo Park, Sunwoong Kim
code/data similarity 0.53
Abstract · Accepted to the 2nd Workshop on Domain-Specialized FPGAs (WDSFPGA), co-located with ISFPGA 2026

As post-quantum cryptography algorithms move toward large-scale data center deployment, hardware acceleration of their computational bottleneck, which is the number theoretic transform (NTT), has gained increasing attention. StreamNTT, a high-level synthesis- and field-programmable gate array-based accelerator, achieves state-of-the-art throughput through various optimization techniques. However, its reliance on a commercial tool and a device makes direct comparisons difficult for researchers without access. We address this by building StreamNTT on an open-source Verilog-to-Routing toolchain, which achieves similar digital signal processing and multiplier usage. Significant differences in internal memory utilization indicate that further memory-level optimization is needed to approach commercial tool performance.

0.32

Model Compression and Hardware-Aware Acceleration for Deep Learning on FPGAs: A Co-Design Taxonomy and Comparative Analysis

cs.AR ·2026-08-21 ·Peter Forcha, H. Kajekusumadhar, Mbua Peter, Muhammed Kawser, Audrey Cyriell Mo +1 more
survey similarity 0.52
Abstract

Deploying deep neural networks on Field-Programmable Gate Arrays (FPGAs) requires joint reasoning about model compression and hardware acceleration, however the most comprehensive existing cross-platform treatment of this space, Deng et al.~\cite{deng2020model}, compared compression techniques against CPU, GPU, FPGA, and ASIC targets at the level of broad, qualitative trade-offs, and not specific FPGA resource consequences. This survey instead restricted the scope to FPGAs alone and organized 25 compression-hardware co-design case studies (2015--2026) into a five-category taxonomy defined by which FPGA resources each strategy primarily reshapes: DSP-eliminating, DSP-repurposing/mixed-precision, sparsity-exploiting, memory-hierarchy-driven, and toolchain/deployment-level. Normalizing these case studies along a common set of dimensions (compression ratio, accuracy change, throughput, energy efficiency, and DSP/LUT/BRAM utilization) surfaces a central, quantitative finding; of the 25 reviewed works, only \emph{one} reported a compression ratio and accuracy change measured against a single common baseline, and only \emph{two} reported energy efficiency normalized against a common GPU baseline, exposing a field-wide characterization gap that no individual toolchain (FINN, HLS4ML, Vitis AI, or DNNWeaver) resolves on its own. Building on this taxonomy and meta-analysis, we formalize six open challenges: toolchain fragmentation, accuracy--efficiency characterization, automated mixed-precision optimization, sparse computation reliability, persistent memory bottlenecks, and FPGA-based training. Each is paired with a concrete next step grounded in extending an existing, cited technique, not a general call for future work.

0.21