CS Paper Radar

Precision and resource scaling of real-time flux distortion compensation for superconducting quantum control

Qi Zhou, Zi-Hao Mei, Peng Duan, Peng Wang, Liang-Liang Guo, Hao-Ran Tao, Wei-Cheng Kong, Hui Yang, Guo-Ping Guo, Zhao-Yun Chen

cs.AR quant-ph ·submitted 2026-09-23 07:23 UTC · v1

Abstract

Real-time waveform generation supports dynamic quantum circuits without pre-storing complete waveforms for every execution path. However, long-lived distortions in flux-control lines degrade gate fidelity, requiring compensation to account for the actual pulse history. A frequency-domain inversion and time-domain fitting method is proposed for resource-efficient real-time flux distortion compensation. The method fits the reconstructed compensation impulse response with a compact hybrid infinite impulse response (IIR) and finite impulse response (FIR) filter. Look-ahead parallelization enables this filter to process synthesized waveforms at 1.2GSa/s on a field-programmable gate array (FPGA). Two-qubit cross-entropy benchmarking shows that real-time IIR filtering achieves a median controlled-Z Pauli fidelity close to the software-reference value of 99.57%. Numerical analysis and FPGA synthesis indicate approximately logarithmic growth in hardware resource use with compensation timescale. Extending compensation from microsecond to hundred-microsecond timescales increases look-up table (LUT) and digital signal processing (DSP) resource use by only about 14% and 4%, respectively, while maintaining a relative arithmetic error below $10^{-4}$. This work provides a scalable hardware foundation for high-fidelity flux control in dynamic superconducting quantum circuits.

Comment
17 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Real-Time Adaptive Filtering and the Boxcar Limit in Superconducting Qubit Readout

eess.SP quant-ph ·2026-09-30 ·Hans Johnson, Tanay Roy, Leonardo Bove, David van Zanten, Silvia Zorzetti +1 more
similarity 0.67
Abstract · 16 pages, 12 figures, 2 tables, 27 equations

Control and readout systems for superconducting quantum computing support real-time control and high-fidelity qubit-state discrimination. We examine when additional digital processing improves readout fidelity. A common baseline for dispersive readout uses a boxcar averager to compute a uniformly weighted average over a fixed window followed by threshold-based state assignment. We evaluated an adaptive finite-impulse-response (FIR) filter trained in real time using the least-mean-squares (LMS) algorithm on a field-programmable gate array (FPGA) quantum controller. We also analyzed measured readout shots offline to compare the frozen filter with boxcar averaging, and evaluate per-sample weighting plus sequential detection. For the fixed FIR filters tested, summing the filtered samples gives the boxcar sum multiplied by one complex number apart from a small edge correction. We call this the kernel collapse. The multiplication scales the state separation and noise equally without improving state discrimination, and we call this the boxcar limit. The frozen LMS filter reduces trace noise, but shows no resolved improvement in readout fidelity. On a 2D transmon, optimizing the readout window accounted for much of the improvement over full-window integration. We then examined how changing the decision method could reduce calibration effort and decision time. On a higher-fidelity 3D ancilla readout, our modeled template estimation reached the same fidelity target as direct averaging with 89.8% fewer labeled shots per state. Offline sequential replay assigned most shots before the acquisition window ended. These results distinguish waveform denoising from state-discrimination improvement, and motivate direct control of decision weights and assignment time in dispersive readout.

0.25

State-Space-Based FIR Filtering on a Quantum Computer

eess.AS cs.SDeess.SPquant-ph ·2026-09-17 ·Roope Salmi, Davide Rocchesso, Vesa Välimäki
similarity 0.62
Abstract · Submitted to ICASSP 2027

Many signal processing tasks require intensive computations. Quantum computing promises to accelerate certain tasks, but algorithms must be designed around the limitations of quantum mechanics. This paper provides a quantum implementation of finite impulse response (FIR) filters, which are a widely used tool in classical signal processing. The filter can be parallelized and composed as part of larger quantum algorithms, with potential for speedups using quantum amplitude estimation and future fault-tolerant quantum hardware. To accomplish these properties, we introduce a state-space framework wherein sample-based signal processing is performed with unitary quantum circuits. We present the quantum delay gate as the quantum analog of the delay line in discrete-time signal processing. Unitary circuits intrinsically describe lossless systems, but we also implement lowpass and other bounded filters by emulating a projection operator. The FIR filter implementation is tested and demonstrated with a quantum circuit simulator.

0.24

Scaling classical hardware for accurate real-time quantum error correction

cs.AR quant-phcs.LG ·2026-11-19 ·Chenyang Jin, Susanne F. Yelin, Andi Gu
similarity 0.61
Abstract · 13 pages, 5 figures, 4 Extended Data figures, 1 Extended Data table

Fault-tolerant quantum computation requires a classical decoder fast enough to process syndrome measurements at the rate at which they are generated, and to return its decisions with low latency. This is most demanding for superconducting processors, whose fast syndrome cycles force a trade-off between decoding speed and accuracy. Decoders fast enough to keep up sacrifice accuracy, which must be compensated for with larger codes and thus additional physical qubits. Here we introduce Rapids, a streaming neural decoder that is both fast and accurate. We achieve this by co-designing the decoder with a field-programmable gate array (FPGA): the network is built from operations that map cheaply onto the device and trained in its integer arithmetic. For the distance-19 surface code, Rapids decodes each round of syndromes in under a microsecond on a single FPGA, fast enough for superconducting processors, and returns its decisions with the low latency that fault-tolerant algorithms require. Its logical error rate is 240 times lower than that of existing real-time hardware decoders. The same design extends to the color code and the [[144,12,12]] bivariate-bicycle code, on which our decoder is 16 times more accurate than the real-time Relay decoder. We further show that the decoder scales: spread over several FPGAs or hardened into custom silicon, it becomes faster, more accurate, or able to decode larger codes. Classical hardware thus becomes a further resource, alongside qubits, that can be scaled to improve fault-tolerant quantum computers.

0.19

Lifting: Quantum State Discrimination Framework for Mid-Circuit Measurements

cs.ET quant-phcs.LG ·2026-10-13 ·Chi Zhang, Neel Vora, Yilun Xu, Gang Huang, Fan Chen +1 more
theory similarity 0.58
Abstract

Quantum computing promises new capabilities beyond classical computation. Mid-circuit measurements (MCMs) enable error correction and outcome-dependent control, but their reliability is limited by noise on superconducting hardware. These operations depend on accurate quantum state discrimination (QSD), which assigns measured signals to state labels. Neural network-based (NN-based) QSD improves this assignment, yet its error remains bounded below by the Bayes risk of the available readout distributions. A complementary challenge is state deterioration as successive measurements accumulate and circuit execution advances, making static calibration less representative of the workload. We present Lifting, a QSD framework that addresses both challenges through repetition encoding, neural decoding, and in situ calibration. Encoding supplies joint in-phase and quadrature (I-Q) readout signals from the target and auxiliary qubits, while contextual calibration trains the decoder for the conditions encountered during execution. Our theoretical analysis shows that retaining additional channels from a fixed joint distribution cannot increase Bayes risk and establishes sufficient conditions for contraction of an overlap-based upper bound. Experiments across three IBM processors evaluate the framework on repeated stabilizer measurement, parity-check, and teleportation workloads.

0.09

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.58
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35

Architecting Instruction Execution for Scalable Fault-Tolerant Quantum Computing

cs.ET quant-ph ·2026-10-12 ·Dmitry Filippov, Justin Hogaboam, Mathias Soeken, Raghu Gatta, Prakash Murali +1 more
published similarity 0.58
Abstract · Published in IISWC 2026

Scaling fault-tolerant quantum computing (FTQC) requires orchestrating millions of operations continuously across a tightly coupled classical-quantum control stack. A critical challenge in this orchestration is determining the optimal hardware-software boundary, i.e., the Quantum Instruction Set Architecture (QISA). We focus on cryogenic, fixed-connectivity qubit platforms, such as superconducting and topological Majorana qubits. For these, existing QISA choices either operate at too low a level, violating cryogenic thermal budgets at scale, or at too high a level, imposing unrealizable complexity on the control engine. To reason about these tradeoffs, we introduce the ARIES instruction set hierarchy, which categorizes QISAs into distinct abstraction levels. To systematically evaluate these levels, we develop an end-to-end evaluation toolflow featuring a cycle-accurate classical driver and hardware engine simulator. Using eight quantum applications across superconducting and topological qubit platforms, we measure instruction bandwidth, transceiver power dissipation, and measurement processing overheads. We demonstrate that while physical-level abstractions exceed the thermal limits of dilution refrigerators by orders of magnitude, canonical-level abstractions significantly underestimate hardware routing congestion and execution runtimes. Our Level 4 QISA (local logical operations) offers an optimal architectural balance. As quantum hardware platforms scale toward FTQC in the coming years, our findings provide concrete architectural guidance for the design of their classical control stacks and instruction interfaces.

0.24

Spiking neural networks for streaming qubit readout

cs.NE quant-ph ·2026-10-01 ·Barry M. Dillon, Aqib Javed, Jim Harkin, Patryk Dabkowski, Benjamin Lienhard
similarity 0.57
Abstract · 25 pages, 9 figures, 6 tables

Fast and accurate qubit-state assignment is essential for feedback, calibration, and error correction in quantum processors. In superconducting platforms, frequency-multiplexed readout makes this task intrinsically multivariate as measured traces can encode crosstalk, qubit-state relaxation events, and other transient nonidealities that are not fully captured by conventional matched filtering. Here, we introduce spiking neural network (SNN) discriminators for superconducting qubit readout. By processing the measurement window in successive time chunks, the networks exploit temporal structure and update classification scores as data arrive, rather than waiting until the end of the readout window. The spiking networks outperform matched-filter discrimination and approach the accuracy of a full-trace artificial neural network. Beyond reaching the performance of artificial neural networks, the key advantage of SNNs is that they provide a streaming, time-resolved estimate of the qubit state that evolves as the readout signal is acquired. Using quantisation-aware training and hls4ml synthesis, we further demonstrate that each FPGA inference update can be completed before the next readout chunk arrives. These results establish spiking neural networks as a promising route to low-latency, real-time qubit readout on FPGA hardware, with broader implications for time-critical quantum-control and scientific-inference applications.

0.22

SpinControl: Control Software for Prototyping and Benchmarking of Spin-Qubit Devices and Measurement Protocols

cs.SE quant-ph ·2026-10-16 ·Harold B. Meerwaldt, Daniël P. van der Velde, Pieter T. Eendebak, Michiel J. Haye
code/data similarity 0.57
Abstract · 11 pages, 8 figures

Quantum computers require software to control the states of the qubits. As the actions on qubits grow in complexity with circuit execution, calibration, and benchmarking, the complexity of the control software grows in tandem. Spin-qubit quantum computers are at a stage where experimentalists need low-level access for tuning and calibration, and quantum algorithm researchers want high-level circuit-level access. In this article, we present the software design of SpinControl. SpinControl integrates three architectural metrics: 1) customizability, to allow prototyping devices and measurement protocols, is achieved by separating data and behaviour; 2) modularity and extensibility are achieved by separating functionalities into different components; and 3) robustness, to reliably execute quantum circuits on many qubits, is achieved by CI pipelines and input validation. SpinControl allows different types of measurements while customizing the instruments used, the pulse or circuit program executed, and the data processing. It allows building standardized experiments from measurement and analysis building blocks and executing these for calibration in a custom and conditional order. SpinControl implements these functionalities alongside robust configuration and data management, a connection to the cloud, and calibration scheduling. Pulse and circuit compilation, virtual gate matrices, as well as spin-qubit-specific GUIs integrated by SpinControl, make heavy use of software packages developed by Delft University of Technology: pulse lib, core-tools (both open source), and QConstruct

0.41