CS Paper Radar

A 140.5$μ$W, 99.8% Accuracy, 96.1dB SNR BioZ IC for Real-Time Cell Analysis with On-Demand Push-Pull Excitation and Continuous-Time $ΔΣ$ T-D Readout

Jiayang Li, Junzhe Chen, Xin Zhang, Peiqing Li, Liwen Zhang, Navya Nayak, Yating Zou, Xuanyu Liang, Hubin Zhao, Roshan Weerasekera, Xiao Liu, Reza Haqshenas, Dai Jiang, Martin Cryan, Sohmyung Ha, Andreas Demosthenous, Edoardo Charbon, Dinesh Pamunuwa

eess.SP ·submitted 2026-10-24 13:02 UTC · v1
published

Abstract

This paper presents a bioimpedance IC combining an on-demand push-pull driver and continuous-time $ΔΣ$ T-D readout to address the trade-off between SNR, accuracy and power consumption. The driver delivers 200$μ$App with $\leq$0.14% THD while consuming 80.3$μ$A. Using a 6MHz clock, the readout achieves 53.6ps effective timing resolution at a 4k$Ω$ load (0.1-4Hz noise integration). The IC achieves 96.1dB peak SNR, 99.8% magnitude accuracy and 0.13$^{\circ}$ phase error at a maximum power consumption of 140.5$μ$W.

Comment
Accepted for publication in ISSCC 2027, Paper 12.6. 8 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

cs.AR ·2026-09-02 ·Subhradip Chakraborty, Zihan Yin, Xuming Chen, Chengwei Zhou, Gourav Datta +1 more
similarity 0.57
Abstract

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

0.26

A Timing-Robust Frequency-Interleaved ADC with Embedded Analog Fourier Transform

eess.SP ·2026-10-02 ·Xingchen Chao, Yunqiang Xu, Qiang Yu, Christian Adam, Qiang Li
similarity 0.53
Abstract

Timing errors represent a fundamental challenge in high-speed analog-to-digital converters (ADCs). This paper presents a frequency-interleaved architecture with inherent robustness to timing errors. The frequency interleaving is achieved by an embedded analog Fourier transform (AFT), allowing accurate channel spacing. The charge-based passive AFT is able to share the capacitor array with the capacitive DAC of the subsequent data conversion. A circuit implementation for the complex-valued irrational coefficients in the AFT matrix is proposed, which eliminates the device-ratio-induced systematic errors. Measured at 10b 13GS/s, the calibration-free ADC achieves 45.8-dB SNDR and 56.1-dB SFDR at Nyquist. The ADC consumes 26.4mA from a single 1V supply, resulting in a Walden FoM of 12.7 fJ/conv.-step.

0.25

Compute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit Readout

cs.AR quant-phcs.ETeess.SP ·2026-11-17 ·Qirui Zhang, Ben Toby, He Wang, Benjamin Lienhard, David Blaauw +1 more
similarity 0.52
Abstract

We introduce DIRAC, an ADC-less in-cryostat qubit readout architecture that uses analog computing to redraw the analog-digital boundary. Directly operating on the front-end's analog output, passive complex mixers perform the equivalent of digital demodulation, ping-pong active-RC integrators average their outputs into down-sampled per-qubit traces, and a time-domain stage digitizes them, eliminating Nyquist-rate ADCs. A TX-RX co-design derives the mixers' local oscillators from the readout transmitter's baseband rather than per-tone PLLs. A per-line calibration flow trains the matched filter jointly with the neural network, improving fidelity and enabling low-bit-width, low-voltage digital processing. Designed in 22 nm FD-SOI and evaluated at 4 K on 1.12M experimental shots, DIRAC matches the fidelity of a floating-point (FP32) digital pipeline for readout windows down to 750 ns, at 31.6$\times$ and 238$\times$ lower energy than the fixed-point (FxP) and FP32 pipelines. It cuts the total 4 K power per physical qubit by 50.4% and 68.6% relative to FxP and room-temperature flex cables, respectively. At a fixed logical-qubit count and 4 K budget, this yields, against FxP, a code distance larger by 2 to 6 and a 1.6-7.3$\times$ (Willow) and 4.9-204$\times$ (SI1000, $p = 10^{-3}$) lower logical error rate.

0.26

NOVA-CIM: Noise- and Correlation-Tolerant Stochastic Interfaces for Analog Compute-in-Memory

cs.AR ·2026-09-07 ·Jiachen Ren, Wenshuai Yao, Haobo Liu, Xincheng Feng, Chenxi Hu +4 more
similarity 0.51
Abstract

Analog compute-in-memory (CIM) enables energy-efficient model acceleration, but its reliance on ADC-based readout, which directly quantizes noisy column currents, makes inference accuracy highly sensitive to analog read noise, active-row scaling, and ADC precision. In this paper, we present NOVA-CIM, a noise- and correlation-tolerant stochastic interface for analog CIM by replacing multi-bit ADC readout with random-reference 1-bit sensing and reconstructing results through lightweight counting. By converting column currents into comparison probabilities, this probability-domain readout averages zero-mean dynamic read noise over stochastic samples while reducing dependence on high-resolution ADCs. We provide a unified robustness analysis showing that dynamic read noise is suppressed through temporal averaging and that spatial input-bitstream correlation increases instantaneous current variance rather than introducing first-order MAC bias. MAC-level experiments and end-to-end evaluation on ViT-Base validate the analysis: under read noise, Top-1 accuracy remains 84.48% near the 84.51% bfloat16 (BF16) baseline; under stochastic number generator (SNG) reuse, MAC bias stays near zero while root-mean-square error (RMSE) and stochastic cross-correlation (SCC) grow as predicted.

0.17

Timing Skew Estimation of Time-Interleaved ADC based on Inter-Channel Correlations without Computing Derivative of Input Signal

eess.SP eess.SY ·2026-10-19 ·Bibhu Datta Sahoo, Gabriele Manganaro
similarity 0.49
Abstract

Time-interleaved analog-to-digital converters (TI-ADCs) enable multi-gigasample-per-second throughput in high-speed applications, but sub-picosecond timing skews among interleaved channels introduce large spectral artifacts that degrade dynamic performance. To continuously track parametric drifts without interrupting normal operation, background calibration is required. However, extracting timing skews under unknown inputs is challenging, and many existing correlation-based methods rely on resource-heavy derivative filters that restrict input bandwidth. This article proposes a novel background timing-skew estimation technique for two-channel TI-ADCs that overcomes these limitations. Closed-form timing-skew expressions are derived using: (a) adjacent-channel cross-correlation combined with single-channel auto-correlation for sinusoidal inputs, and (b) adjacent-channel cross-correlation for Wide-Sense Stationary (WSS) inputs, specifically bandpass-filtered wideband noise and Orthogonal Frequency Division Multiplexed (OFDM) signals. The derived analytical models are validated through comprehensive simulations, offering an efficient framework for real-time background calibration in high-speed data converters.

0.17

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.49
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35

SLICE-CiM: Selective Layer-wise Inference Control Engine with Confidence-Based Early Exit for SRAM based Digital Compute-in-Memory

cs.AR cs.NE ·2026-10-27 ·Pratham Sharma, Mohd Faisal Khan, Santosh Kumar Vishvakarma
similarity 0.49
Abstract

Digital SRAM compute-in-memory (CIM) macros enable energy-efficient CNN inference by eliminating off-chip weight transfers; however, peripheral control logic introduces three inefficiencies: bit- slice over-activation at reduced precision (L1), unnecessary accumula- tion depth (L2), and idle precision-transition stalls (L3). To address these, we present four synthesizable peripheral blocks: a Flush-Merge Enable (FME) controller, a Confidence-Based Early-Exit (EE) module, a Precision Register with Decoder (PR/PD), and a Bit-Serial Cycle Controller (CC), co-designed to minimize switching activity, wordline overhead, and leakage. Implemented in TSMC 65-nm CMOS at 335 MHz, the peripheral framework occupies 1769.760 μm2 post-synthesis and 1982.131 μm2 post-PnR. Gate-level VCD analysis reports 6.0706 μW leakage and 288.2902 μW (post-synthesis) / 322.8850 μW (post-PnR) dynamic power, totaling 328.9556 μW (0.2402% of system power). The EE module dominates dynamic power (58.2%), while WLG dominates area (58.1%). System evaluation on MobileNetV2 (CIFAR-100) shows efficiency scaling from 31.35 TOPS/W (8b/8b, 1.2 V) to 454.91 TOPS/W (2b/8b, 0.8 V), achieving 13.33x improvement without bitcell modification or retraining. The framework targets CNN workloads exploiting sparsity, with Transformer extension as future work.

0.34

SMART-AIMC: Sensitivity-Aware Mixed ADC Resolution with Fine-Grained Tunability for Analog In-Memory Computing

cs.AR cs.AI ·2026-11-01 ·Yung-Chin Chen, Ourania Stouraiti, Naveen Verma
similarity 0.49
Abstract

Analog In-Memory Computing (IMC) is a promising paradigm for accelerating GEMM-based AI workloads by executing computations directly within the memory array in the analog domain. While IMC delivers substantial energy and throughput improvements, it can suffer from significant task accuracy degradation due to analog-to-digital converter (ADC) quantization noise, which occurs at the GEMM output and is thus different from weight/activation quantization, which occurs at the GEMM input. Mixed ADC resolution allows IMC modules to choose between high- and low-resolution ADC modes with different energy costs, offering a compelling accuracy-energy trade-off. However, selecting ADC resolutions across IMC units while respecting hardware granularity constraints remains challenging. In this paper, we propose SMART-AIMC, a Sensitivity-aware Mixed ADC Resolution framework with fine-grained Tunability for Analog In-Memory Computing. SMART-AIMC correlates the algorithmic task loss to hardware ADC quantization noise in the form of an ADC Channel Sensitivity (ACS) metric. Using this metric, SMART-AIMC systematically, and in a disciplined manner, allocates ADC resources to critical computations. Furthermore, we introduce a sensitivity-based channel reordering scheme that overcomes the hardware granularity constraints with no runtime overhead and approaches the optimal ADC quantization possible for the model. Evaluated across diverse workloads, SMART-AIMC unlocks a superior accuracy-energy Pareto frontier, providing (1) higher task accuracy at matched energy budgets and (2) fine-grained tuning across efficiency targets, from aggressive energy savings to near-digital inference accuracy. At the latter operating point, SMART-AIMC achieves $6.99\times$ higher modeled system-level energy efficiency for linear projections than the INT8 digital baseline with negligible accuracy degradation.

0.23