CS Paper Radar

Timing Skew Estimation of Time-Interleaved ADC based on Inter-Channel Correlations without Computing Derivative of Input Signal

Bibhu Datta Sahoo, Gabriele Manganaro

eess.SP eess.SY ·submitted 2026-10-19 08:04 UTC · v1

Abstract

Time-interleaved analog-to-digital converters (TI-ADCs) enable multi-gigasample-per-second throughput in high-speed applications, but sub-picosecond timing skews among interleaved channels introduce large spectral artifacts that degrade dynamic performance. To continuously track parametric drifts without interrupting normal operation, background calibration is required. However, extracting timing skews under unknown inputs is challenging, and many existing correlation-based methods rely on resource-heavy derivative filters that restrict input bandwidth. This article proposes a novel background timing-skew estimation technique for two-channel TI-ADCs that overcomes these limitations. Closed-form timing-skew expressions are derived using: (a) adjacent-channel cross-correlation combined with single-channel auto-correlation for sinusoidal inputs, and (b) adjacent-channel cross-correlation for Wide-Sense Stationary (WSS) inputs, specifically bandpass-filtered wideband noise and Orthogonal Frequency Division Multiplexed (OFDM) signals. The derived analytical models are validated through comprehensive simulations, offering an efficient framework for real-time background calibration in high-speed data converters.

Closest papers

Nearest neighbours by meaning across the whole index.

A Timing-Robust Frequency-Interleaved ADC with Embedded Analog Fourier Transform

eess.SP ·2026-10-02 ·Xingchen Chao, Yunqiang Xu, Qiang Yu, Christian Adam, Qiang Li
similarity 0.68
Abstract

Timing errors represent a fundamental challenge in high-speed analog-to-digital converters (ADCs). This paper presents a frequency-interleaved architecture with inherent robustness to timing errors. The frequency interleaving is achieved by an embedded analog Fourier transform (AFT), allowing accurate channel spacing. The charge-based passive AFT is able to share the capacitor array with the capacitive DAC of the subsequent data conversion. A circuit implementation for the complex-valued irrational coefficients in the AFT matrix is proposed, which eliminates the device-ratio-induced systematic errors. Measured at 10b 13GS/s, the calibration-free ADC achieves 45.8-dB SNDR and 56.1-dB SFDR at Nyquist. The ADC consumes 26.4mA from a single 1V supply, resulting in a Walden FoM of 12.7 fJ/conv.-step.

0.25

SMART-AIMC: Sensitivity-Aware Mixed ADC Resolution with Fine-Grained Tunability for Analog In-Memory Computing

cs.AR cs.AI ·2026-11-01 ·Yung-Chin Chen, Ourania Stouraiti, Naveen Verma
similarity 0.52
Abstract

Analog In-Memory Computing (IMC) is a promising paradigm for accelerating GEMM-based AI workloads by executing computations directly within the memory array in the analog domain. While IMC delivers substantial energy and throughput improvements, it can suffer from significant task accuracy degradation due to analog-to-digital converter (ADC) quantization noise, which occurs at the GEMM output and is thus different from weight/activation quantization, which occurs at the GEMM input. Mixed ADC resolution allows IMC modules to choose between high- and low-resolution ADC modes with different energy costs, offering a compelling accuracy-energy trade-off. However, selecting ADC resolutions across IMC units while respecting hardware granularity constraints remains challenging. In this paper, we propose SMART-AIMC, a Sensitivity-aware Mixed ADC Resolution framework with fine-grained Tunability for Analog In-Memory Computing. SMART-AIMC correlates the algorithmic task loss to hardware ADC quantization noise in the form of an ADC Channel Sensitivity (ACS) metric. Using this metric, SMART-AIMC systematically, and in a disciplined manner, allocates ADC resources to critical computations. Furthermore, we introduce a sensitivity-based channel reordering scheme that overcomes the hardware granularity constraints with no runtime overhead and approaches the optimal ADC quantization possible for the model. Evaluated across diverse workloads, SMART-AIMC unlocks a superior accuracy-energy Pareto frontier, providing (1) higher task accuracy at matched energy budgets and (2) fine-grained tuning across efficiency targets, from aggressive energy savings to near-digital inference accuracy. At the latter operating point, SMART-AIMC achieves $6.99\times$ higher modeled system-level energy efficiency for linear projections than the INT8 digital baseline with negligible accuracy degradation.

0.23

Burst-mode timing recovery based on fourth-power phase detector for passive optical networks

cs.NI ·2026-09-14 ·Ji Zhou, Haide Wang, Xiaofeng Zhang, Zhiyang Liu, Miao Yu +3 more
publishedunusual similarity 0.52
Abstract

Driven by the ever-increasing capacity demands, 50G passive optical network (50G-PON) is ready for practical application. It is highly challenging to realize 50GHz burst-mode analog components; therefore, based on 25GHz burst-mode analog devices, burst-mode digital signal processing (DSP) is introduced to achieve the reception and processing of 50Gb/s on-off keying burst signals. To optimize the power consumption and area of the DSP chip, a one-sample-per-symbol (1-SPS) analog-to-digital converter has been applied in 50G-PON. One of the main challenges is implementing burst-mode timing recovery (BM-TR) for the 1-SPS burst signal in 50G-PON. In this paper, we first propose a BM-TR based on the fourth-power phase detector (4PPD) for 50G-PON. We mathematically verify that 4PPD can directly compute the timing phase offset (TPO) from the 1-SPS signal without using training sequences, allowing for immediate BM-TR initialization within 20 cycles to prevent long convergence times. After the initialization, the feedback loop structure tracks the TPO changes based on the sign of 4PPD, the loop filter, and the numerically controlled oscillator. In conclusion, training-sequence-free 4PPD-based BM-TR achieves low burst overhead via fast convergence and is particularly effective for handling burst signals in 50G-PON.

0.37

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

cs.AR ·2026-09-02 ·Subhradip Chakraborty, Zihan Yin, Xuming Chen, Chengwei Zhou, Gourav Datta +1 more
similarity 0.50
Abstract

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

0.26

A 140.5$μ$W, 99.8% Accuracy, 96.1dB SNR BioZ IC for Real-Time Cell Analysis with On-Demand Push-Pull Excitation and Continuous-Time $ΔΣ$ T-D Readout

eess.SP ·2026-10-24 ·Jiayang Li, Junzhe Chen, Xin Zhang, Peiqing Li, Liwen Zhang +13 more
published similarity 0.49
Abstract · Accepted for publication in ISSCC 2027, Paper 12.6. 8 pages, 7 figures

This paper presents a bioimpedance IC combining an on-demand push-pull driver and continuous-time $ΔΣ$ T-D readout to address the trade-off between SNR, accuracy and power consumption. The driver delivers 200$μ$App with $\leq$0.14% THD while consuming 80.3$μ$A. Using a 6MHz clock, the readout achieves 53.6ps effective timing resolution at a 4k$Ω$ load (0.1-4Hz noise integration). The IC achieves 96.1dB peak SNR, 99.8% magnitude accuracy and 0.13$^{\circ}$ phase error at a maximum power consumption of 140.5$μ$W.

0.35

A Subsample Time-Delay Estimator with a Farrow Structure

eess.SP ·2026-10-27 ·Hugh L. Kennedy
unusual similarity 0.49
Abstract

A novel solution to the classical problem of subsample time-delay estimation (TDE) for a wideband signal received by two adjacent sensors is described. A mean squared-error (MSE) measure of dissimilarity is defined and evaluated using a variable fractional-delay (VFD) filter bank with a finite impulse response (FIR). Using a filter bank with a Farrow structure allows the MSE power to be expressed as a polynomial function of the filter delay with a local minimum at the unknown signal delay. In Monte-Carlo simulations, the proposed estimator outperforms the generalized cross-correlation (GCC) technique when the signal-to-noise ratio (SNR) is not low (less than 10 dB).

0.30

xCHEM: SDR-Based Multi-Link Channel Emulator for Real-Time Hardware-in-the-Loop Digital-Twin

eess.SP ·2026-10-28 ·Ali Saeizadeh, Gabriele Gemmi, Tamerlan Aghayev, Michele Polese, Pedram Johari +1 more
similarity 0.49
Abstract · 13 pages, 16 figures, 4 tables

This paper presents xCHEM, a radio-frequency channel emulator that inserts programmable channels between physical radios using a single NI USRP X4xx software-defined radio. External channel models stream impulse responses to its field-programmable gate array without firmware changes or interruption of signal processing. A streaming datapath implements six independently configurable directional channels across four radio interfaces. Each channel uses a sparse finite impulse response filter whose memory-backed delays decouple delay span from multiplier resources. The real and complex variants support 32 and 16 nonzero taps, respectively, with a maximum delay of 16666.62 ns and 4.069 ns resolution. Coefficient scaling and arithmetic right shifts control attenuation. Hardware measurements show root-mean-square errors of 9.5 ps in delay over the full span and 0.11 dB in attenuation. Multipath delays are recovered within one sample. An FPGA coefficient engine produces tested Doppler shifts from +/-1 Hz to +/-1 MHz with mean frequency errors below 0.032 Hz relative to quantized commands after carrier-offset calibration; at 200 Hz, it reduces the measured near-carrier spur by 53.3 dB compared with 1 kHz host updates.

0.39

A Hybrid Digital/Analog Polyphase Filtering Approach for High-Speed RF-DACs

eess.SP ·2026-11-06 ·Behdad Jamadi, Jungmin Lee, Tarun Cousik, Rohit Rangaraj, Jeffrey S. Walling
similarity 0.48
Abstract · 11 pages, 5 figures, 5 tables

This paper proposes a hybrid polyphase interpolation for RF-DACs that removes the need for full-rate digital commutation by using passive combining on the RF-DAC itself. A P-branch polyphase FIR filter is factored into M streams, each formed by a (P/M)-way digital commutator at fRF/M and driving a dedicated RF-DAC slice, giving either partial digital (1<M<P) or fully analog (M=P) recombination. We show that the slice array acts as a single full-rate DAC with an M-times longer zero-order hold, derive yield laws for slice gain, timing and unit-capacitor mismatch, and find that with retiming the binding requirement is sub-picosecond matching of the fRF clock arrival, so the best choice is the smallest M that closes digital timing. Two 28-nm digital macros, designed for a 12.8GSps output rate and verified by post-layout simulation, illustrate a 4-phase variant that closes timing up to 14.4GSps with its digital logic at fRF/4 and an 8-phase variant that closes timing up to 16GSps with its digital logic at fRF/8. The analog recombination is evaluated with a behavioral model of the slice array. The architectures target wideband software defined radio (SDR) platforms, including cognitive radio, electronic warfare, and satellite communications.

0.30