CS Paper Radar

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

Subhradip Chakraborty, Zihan Yin, Xuming Chen, Chengwei Zhou, Gourav Datta, Akhilesh Jaiswal

cs.AR ·submitted 2026-09-02 20:01 UTC · v1

Abstract

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

Closest papers

Nearest neighbours by meaning across the whole index.

SPARC: Accurate Photonic Matrix Multiplication via Representative Vectors

cs.AI ·2026-11-12 ·Yasuhiro Fujiwara, Tatsuhiro Nakamori, Hideyuki Kawashima
similarity 0.61
Abstract · 11 pages, 5 figures, 3 tables

Photonic neural network accelerators have emerged as a promising solution for reducing the power consumption of deep neural network (DNN) inference by executing matrix multiplication on analog photonic hardware. However, their inference accuracy is limited by low-bit quantization required for photonic processing and by analog photonic noise. This paper proposes an approach for improving inference accuracy by exploiting the high similarity among activation vectors in DNNs. Specifically, our approach constructs a representative vector for each group of similar activation vectors, computes its inner product digitally with high precision, and offloads the residual inner products to the photonic accelerator. Since the activation vectors within each group are highly similar, the residual vectors have much smaller norms, thereby reducing the effects of quantization errors and analog photonic noise. Furthermore, our approach preserves the photonic inner-product computation pipeline, allowing seamless integration into existing and future photonic accelerators without hardware modification. Experimental results on six representative DNN models demonstrate that the proposed approach can improve inference accuracy across diverse network architectures and application domains.

0.26

Versatile Photonic Encoding Platform with Selectable Back Ends for Automotive Edge Processing

cs.ET ·2026-10-29 ·Isamu Takai, Makoto Nakai, Ayana Mizuno, Atsutaka Miyamichi
similarity 0.57
Abstract · 21 pages, 10 figures, 3 tables, 4 supplementary tables

The increasing diversity and computational demands of automotive edge functions require hardware architectures that support heterogeneous processing while limiting implementation complexity and system overhead. We investigate a system-level approach in which a common, fixed photonic front end provides a shared physical transformation for multiple processing functions, while application adaptation is handled by lightweight peripheral processing. We propose the Versatile Photonic Encoding Platform (VPEP), implemented using a fabricated silicon-photonic chip with 32 phase-modulated inputs, a passive fixed encoding core, and 17 on-chip photodetector outputs. Without reconfiguring the photonic core, the same chip is evaluated across four representative functions relevant to automotive edge systems: classification and regression for machine learning, analog-to-digital conversion for mixed-signal processing, and photonic information encoding and recovery for communication-related processing. Compared with linear baselines without photonic encoding, VPEP improves the mean macro-F1 score on 12 of 13 classification datasets and the mean coefficient of determination on 9 of 12 regression benchmarks. For analog-to-digital conversion, the best configuration achieves an in-sample normalized root-mean-square error of approximately 0.75% of full scale. For information encoding and recovery, a lightweight nonlinear decoder reconstructs four-character (32-bit) inputs from 17-channel encoded outputs with approximately 94% character accuracy for a 26-symbol set. These results demonstrate the feasibility of cross-application processing with a single fixed silicon-photonic encoding core and suggest a system-level design approach, complementary to reconfigurable photonic architectures, that combines common photonic hardware with lightweight application-specific processing for future automotive edge systems.

0.29

A 140.5$μ$W, 99.8% Accuracy, 96.1dB SNR BioZ IC for Real-Time Cell Analysis with On-Demand Push-Pull Excitation and Continuous-Time $ΔΣ$ T-D Readout

eess.SP ·2026-10-24 ·Jiayang Li, Junzhe Chen, Xin Zhang, Peiqing Li, Liwen Zhang +13 more
published similarity 0.57
Abstract · Accepted for publication in ISSCC 2027, Paper 12.6. 8 pages, 7 figures

This paper presents a bioimpedance IC combining an on-demand push-pull driver and continuous-time $ΔΣ$ T-D readout to address the trade-off between SNR, accuracy and power consumption. The driver delivers 200$μ$App with $\leq$0.14% THD while consuming 80.3$μ$A. Using a 6MHz clock, the readout achieves 53.6ps effective timing resolution at a 4k$Ω$ load (0.1-4Hz noise integration). The IC achieves 96.1dB peak SNR, 99.8% magnitude accuracy and 0.13$^{\circ}$ phase error at a maximum power consumption of 140.5$μ$W.

0.35

Hardware-Aware Learned Representation Compression for Distributed In-Sensor Vision

cs.LG cs.AIcs.AR ·2026-09-12 ·Chengwei Zhou, Abu Masum, Xuming Chen, Mehran Moghadam, Sreetama Sarkar +5 more
published similarity 0.55
Abstract · Under submission at IEEE Transactions on Emerging Topics in Computing

In-sensor computing reduces the cost of transmitting high-resolution image data by performing early-stage processing near the sensor. However, the logic chip integrated with a CMOS image sensor (CIS) is tightly constrained in compute and memory, limiting conventional deep neural network partitioning. We present OASIS, a distributed in-sensor vision framework that uses a lightweight encoder to generate compact, task-relevant representations before off-chip transmission. The encoder is trained end-to-end using task, entropy, and reconstruction objectives, while the decoder is used only during training. OASIS supports two complementary deployment paths. The first applies 4-bit quantization and Huffman coding while preserving the spatial structure required by classification and dense-prediction tasks. The second uses Sobol-based hyperdimensional computing (HDC) to transform the encoder latent into a fixed-dimensional binary hypervector for associative-memory classification. For the SwinViT-based VWW model, mapping a $3\times3\times8$ latent to a 64-dimensional hypervector provides an additional $1.77\times$ communication reduction with less than one percentage point of accuracy loss relative to the 128-dimensional configuration, yielding an overall $18{,}816\times$ reduction compared with raw 8-bit image transmission. We implement the digital near-sensor pipeline on an AMD Xilinx Zynq UltraScale+ FPGA and characterize it using direct board-level power measurements and Vivado post-implementation analysis, together with circuit-simulated CIS models and a 7-nm ASIC projection. Across visual wake-word classification, hand tracking, and eye tracking, OASIS reduces total system energy by approximately $2\times$-$4.5\times$ while maintaining competitive accuracy, demonstrating a practical hardware-algorithm co-design path for communication-efficient in-sensor vision.

0.21

ECO-COMM: An Ultra Low-Latency Event Camera based Optical Communication System

cs.NI ·2026-08-25 ·Chengling Xu, Keigo Hirakawa, Feng Ye
published similarity 0.55
Abstract · Conditionally accepted to appear ACM MobiHoc 2026

Ultralow-latency communication is critical for emerging next-generation applications such as XR, real-time control, and distributed sensing. We present ECO-COMM, an event-camera-based optical communication system for ultra-low-latency device association and lightweight information exchange. By exploiting the asynchronous sensing and microsecond-level temporal resolution of event cameras, ECO-COMM captures high-frequency optical signals without frame-based acquisition delays. We identify and analyze key hardware-induced challenges in event-camera communication, including timestamp inconsistency, readout contention, trailing effects, and the inevitable refractory period, and develop hardware-aware mitigation techniques to address them. Focusing on a single transmitter-receiver optical link, ECO-COMM establishes the feasibility of practical ultra-low-latency event-camera communication using commercially available hardware.A prototype implementation using an eight-LED transmitter and an off-the-shelf event camera achieves device association within 15 microseconds, symbol latency as low as 100 microseconds, and end-to-end latency below 8 milliseconds for 32-byte payloads at 0.1% bit error rate. ECO-COMM establishes a practical and complementary communication paradigm for ultra-low-latency systems where responsiveness and temporal precision are paramount.

0.44

APEX: A Dual-Sparsity Accelerator for Precise and Efficient SNN Inference

cs.AR ·2026-08-19 ·Devgokul Bawa Venkatesh, Sreeram Radhakrishnan, Rajshekhar Rakshit, Gopalakrishnan Srinivasan
similarity 0.54
Abstract

Spiking Neural Networks (SNNs) have emerged as an energy-efficient alternative to Artificial Neural Networks (ANNs), leveraging sparse accumulate operations in the place of power-hungry multiply-and-accumulate operations. ANN-SNN conversion is a widely adopted approach to realize deep SNNs with accuracy comparable to that of ANNs. The Quantization-Clip-Floor-Shift (QCFS) activation minimizes conversion error, yet requires a large number of inference timesteps to match the source ANN accuracy on real-world vision datasets. PASCAL addresses this by proposing the Precise ANN-SNN Conversion Integrate-and-Fire (PASC-IF) neuron, which guarantees mathematical equivalence between the converted SNN and the source ANN, thereby achieving ANN-equivalent accuracy at significantly reduced timesteps. Despite this algorithmic advancement, the hardware implications of deploying the PASC-IF neuron remain unexplored. In this work, we present APEX, a dual-sparsity SNN inference accelerator that integrates the PASC-IF neuron into the LoAS hardware framework. The three-stage PASC-IF datapath is realized as a fully combinational circuit with no additional latency cost. APEX exploits dual sparsity in both input spikes and weights through a fully temporal-parallel dataflow, enabling efficient sparse computation and reduced memory traffic. Across all evaluated models, the PASC-IF neuron on average achieves up to 3% higher accuracy than the standard IF neuron, with a power overhead of only 1.3%-5.4%, an area overhead of 2.1%-2.7%, and 40% energy reduction for best accuracy configurations.

0.17

SMART-AIMC: Sensitivity-Aware Mixed ADC Resolution with Fine-Grained Tunability for Analog In-Memory Computing

cs.AR cs.AI ·2026-11-01 ·Yung-Chin Chen, Ourania Stouraiti, Naveen Verma
similarity 0.54
Abstract

Analog In-Memory Computing (IMC) is a promising paradigm for accelerating GEMM-based AI workloads by executing computations directly within the memory array in the analog domain. While IMC delivers substantial energy and throughput improvements, it can suffer from significant task accuracy degradation due to analog-to-digital converter (ADC) quantization noise, which occurs at the GEMM output and is thus different from weight/activation quantization, which occurs at the GEMM input. Mixed ADC resolution allows IMC modules to choose between high- and low-resolution ADC modes with different energy costs, offering a compelling accuracy-energy trade-off. However, selecting ADC resolutions across IMC units while respecting hardware granularity constraints remains challenging. In this paper, we propose SMART-AIMC, a Sensitivity-aware Mixed ADC Resolution framework with fine-grained Tunability for Analog In-Memory Computing. SMART-AIMC correlates the algorithmic task loss to hardware ADC quantization noise in the form of an ADC Channel Sensitivity (ACS) metric. Using this metric, SMART-AIMC systematically, and in a disciplined manner, allocates ADC resources to critical computations. Furthermore, we introduce a sensitivity-based channel reordering scheme that overcomes the hardware granularity constraints with no runtime overhead and approaches the optimal ADC quantization possible for the model. Evaluated across diverse workloads, SMART-AIMC unlocks a superior accuracy-energy Pareto frontier, providing (1) higher task accuracy at matched energy budgets and (2) fine-grained tuning across efficiency targets, from aggressive energy savings to near-digital inference accuracy. At the latter operating point, SMART-AIMC achieves $6.99\times$ higher modeled system-level energy efficiency for linear projections than the INT8 digital baseline with negligible accuracy degradation.

0.23

A Timing-Robust Frequency-Interleaved ADC with Embedded Analog Fourier Transform

eess.SP ·2026-10-02 ·Xingchen Chao, Yunqiang Xu, Qiang Yu, Christian Adam, Qiang Li
similarity 0.54
Abstract

Timing errors represent a fundamental challenge in high-speed analog-to-digital converters (ADCs). This paper presents a frequency-interleaved architecture with inherent robustness to timing errors. The frequency interleaving is achieved by an embedded analog Fourier transform (AFT), allowing accurate channel spacing. The charge-based passive AFT is able to share the capacitor array with the capacitive DAC of the subsequent data conversion. A circuit implementation for the complex-valued irrational coefficients in the AFT matrix is proposed, which eliminates the device-ratio-induced systematic errors. Measured at 10b 13GS/s, the calibration-free ADC achieves 45.8-dB SNDR and 56.1-dB SFDR at Nyquist. The ADC consumes 26.4mA from a single 1V supply, resulting in a Walden FoM of 12.7 fJ/conv.-step.

0.25