CS Paper Radar

CARB: A Characterization-Guided Framework for CNN Inference Cost Prediction and Deployment Screening

Linh Nguyen, Zhixin Pan

cs.AR cs.LGcs.PF ·submitted 2026-08-11 05:27 UTC · v1

Abstract

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.72
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

Local Zero-Shot Latency Prediction for Low-End GPUs

cs.DC cs.PF ·2026-11-02 ·Arno Geimer, Beltran Fiz, Dimitris Stripelis
similarity 0.72
Abstract

Quantifying execution latency is an important consideration across Machine Learning. Existing latency-prediction approaches typically train ML models on traces collected from workload execution on target hardware. Collection of representative traces across many consumer GPUs is expensive both in organizing the devices and in manpower, causing existing work to mainly focus on a limited set of high-end GPUs available in cloud computing. To offset this cost, we show that a local host GPU can be configured to reproduce the execution performance of less powerful target GPUs. Through selectively modifying device parameters, we obtain locally measured latencies that closely approximate those observed on the target hardware. We reformulate the latency-prediction task: instead of fitting a prediction model to a dataset of execution traces, we identify local configurations that best reproduce target devices' performance, enabling zero-shot prediction. We evaluate our approach against real measurements from 60 computer-vision models executed on 21 consumer GPU models. Our method achieves a mean absolute percentage error (MAPE) of 14.21%, compared with more than 25% for comparable baselines, reducing relative prediction error by 43.6%. Predicted and measured latencies exhibit an average Spearman correlation of 0.961 across training tasks, demonstrating that the method also accurately preserves performance rankings across devices.

0.20

Mosaic: GPU Sharing with Latency Guarantees through Kernel-Level Interference Prediction

cs.DC ·2026-10-05 ·Foteini Strati, Ethan Graham, Leo Stephan, Paul Elvinger, Ana Klimovic
similarity 0.71
Abstract

GPUs are increasingly in demand for AI workloads, yet often remain substantially underutilized, motivating workload colocation. However, colocation introduces interference that can degrade latency-critical workloads. Existing approaches mitigate interference using either heuristic-based scheduling or interference predictors. Heuristics rely on coarse-grained metrics that overlook important interference sources, while predictors often depend on simulator-specific or similarly coarse metrics. However, GPU interference is complex and arises from multiple mechanisms, including thread-block placement, memory hierarchy contention, and intra-SM resource contention. We present Mosaic, a kernel-level interference predictor that explicitly models these mechanisms using a combination of analytical and lightweight learned models. Across four GPU architectures, Mosaic reduces prediction error by up to an order of magnitude compared to prior predictors. We integrate Mosaic into a scheduler, MosaicSched, that performs online kernel admission control and selects between full-GPU colocation and SM partitioning to maximize best-effort throughput while satisfying latency SLOs. Across all workloads, MosaicSched keeps the p99 latency below or very close to the target SLO.

0.36

Architecting the Next Generation of Asynchronous, Distributed GPUs for the AI Era

cs.AR ·2026-08-23 ·Junrui Pan, Weili An, Cesar Avalos Baddouh, Christin David Bose, Ni Kang +7 more
highly cited similarity 0.71
Abstract

The rapid evolution of machine learning workloads has fundamentally transformed GPU hardware, driving architectures toward Multi-Chip Module (MCM) topologies, asynchronous execution primitives, and persistent, multi-phase kernel behaviors. Despite these shifts, cycle-level simulation infrastructure has lagged behind, lacking the native capability to model the physical non-uniformity of modern GPUs alongside the massive scale of state-of-the-art AI workloads. To bridge this gap, we present a cycle-level simulation framework designed to accurately model modern GPU generations, including Ampere, Hopper, and Blackwell. Rigorously validated against physical silicon, the simulator achieves a 99% Pearson correlation coefficient and a 13.4% mean absolute cycle error on the H100 GPU. Utilizing this infrastructure, we conduct architectural case studies to evaluate emerging design trajectories, including chiplet topology scaling, expanded SRAM capacity and bandwidth, and inter-GPU prefetching strategies.

0.39

Mira: Memory-Efficient MoE Inference Using Adaptive Caching and Predictive Expert Staging

cs.LG ·2026-09-29 ·Sanjali Yadav, Bahar Asgari
similarity 0.70
Abstract

Mixture-of-Experts (MoE) models are a compelling architecture for scaling model capacity, making them especially attractive for deployment on resource-constrained, single-GPU systems. However, this benefit is difficult to realize because expert parameters dominate memory, and token-level routing is dynamic, unpredictable, and skewed. Prior work using offloading and caching remains fundamentally reactive, as systems wait for router outputs before moving experts, leading to inefficient cache utilization and an inability to overlap transfers with compute under tight VRAM budgets. To address these challenges, we propose Mira, an algorithm-system co-design that enables high-capacity MoE inference on a single GPU. Mira shifts from a reactive to a proactive stance by coupling predictive expert management with a tailored quantization format. It introduces lightweight per-layer predictors that anticipate expert usage two layers ahead, enabling proactive prefetching. These predictions feed a two-tier HOT+STAGE GPU cache managed by token-level routing telemetry to retain frequently used experts while staging predicted ones. To minimize transfer overhead, Mira implements a custom compression for expert parameters, which reduces metadata and improves packing efficiency, while minimally degrading accuracy. Mira is implemented as a fully integrated runtime that coordinates predictors, caching policies, and quantized transfers to maximize overlap between communication and compute. Our experiments show that Mira reduces expert-induced stalls. Compared against state-of-the-art baselines, Mira achieves a 5.71x speedup in average throughput on a memory-constrained GPU. It accelerates Time-to-First-Token by 11.71x and achieves a 3.84$x average speedup in beam search inference, demonstrating its effectiveness across diverse inference scenarios.

0.12

Layer-wise CPU-GPU Scheduling for LLM Inference on Memory-Limited Consumer GPUs

cs.DC ·2026-11-01 ·Naoto Sugiura, Yuta Tokusashi, Hiroki Matsutani
published similarity 0.69
Abstract · Euro-Par 2026

As large language model inference environments expand toward consumer devices, it remains challenging to efficiently run models that exceed GPU memory capacity in single-GPU settings. The latency of transferring weights that do not fit in GPU memory accounts for about 98\% of inference time and remains a major obstacle. In this paper, we focus on the fact that during the decode phase, layer computation time on the CPU can be shorter than weight transfer time, presenting an opportunity to hide weight transfers by utilizing this computation time. Therefore, we propose a method to hide transfer latency by executing certain layers on the CPU during the decode phase while asynchronously transferring the next layer's weights to the GPU in the background of that computation. To realize this scheduling, we formulate the placement of CPU/GPU computation and weight transfers as a latency minimization problem and perform optimization using an approximation model with relaxed temporal constraints. Evaluation results confirm that in a consumer desktop environment, our approach accelerates OPT-30B inference by 3.5x compared to HuggingFace Accelerate and 6.3x compared to DeepSpeed Zero-Inference.

0.34

SpecSearch: Towards Hardware-Aware Efficient Speculative Decoding

cs.AI cs.DC ·2026-11-17 ·Selin Yildirim, Ali Zeyrek, Deming Chen
similarity 0.69
Abstract

Speculative decoding (SD) accelerates large language model (LLM) inference, but its optimal configuration depends jointly on workload characteristics, GPU hardware, and available memory. For example, on the RTX~5090, the state-of-the-art speculative drafter DFlash achieves $3.50\times$ the throughput of autoregressive (AR) decoding at low concurrency, but only $0.76\times$ at high concurrency with short outputs. We present SpecSearch, a hardware-aware search engine that jointly optimizes decoding strategy, draft length, and precision across workload--GPU pairs. Its analytical cost model captures memory and compute constraints to identify feasible configurations and narrow the search space for throughput optimization. Guided by this model, calibration measurements are collected from multiple GPUs. Using the measurements, a Jev-based predictor learns to select high-throughput decoding configurations on held-out GPUs without requiring deployment-GPU calibration. The predictor is parameter-efficiently trained on calibration data, while adapting a frozen Qwen3-4B using LoRA adapters and a linear correction layer. Across NVIDIA RTX~5090, H100, L40 and AMD MI300X GPUs, SpecSearch with full calibration achieves an average of $2.01\times$ the throughput of AR and $1.36\times$ the throughput of SD, both served by vLLM. The proposed Jev-based predictor closely matches this search performance with $1.30\times$ throughput improvement over SD with vLLM, while eliminating the need for held-out GPU calibration. Additionally, it retains $97.36\%$ of the throughput achieved by SpecSearch that utilizes full calibration.

0.16

VortexSynth: Profile-guided benchmark reconstruction for GPU architecture research

cs.AR cs.PL ·2026-10-08 ·Huanzhi Pu, Chulhyung Park, Chihyo Ahn, Ramyad Hadidi, Hyesoon Kim
benchmark similarity 0.69
Abstract · 14 pages, 6 figures

GPU architecture research requires representative benchmarks that can execute on new designs. However, many vendor-tailored workloads and library kernels cannot run directly on research architectures because their implementations are closed-source or rely on programming models unsupported by the target architecture. Migrating existing kernels requires manual effort to adapt their implementations and validate their behavior. This creates a need to automate workload migration to target platforms. We present VortexSynth, a framework that uses profile-guided benchmark reconstruction to construct GPU benchmarks from reference workloads. Our workflow selects hot kernels through profiling, synthesizes implementations in the target programming language, verifies output equivalence, and measures profile differences using a translated proxy implementation. The resulting profile signature gap is supplied to an agent for iterative refinement. We evaluate the method on Vortex, an open-ISA GPGPU, using robotics as the application domain. All active kernel pairs pass both output-equivalence checks, and the case studies show that iterative refinement can reduce profile distance.

0.19