CS Paper Radar

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy

cs.AR cs.AI ·submitted 2026-10-30 19:17 UTC · v1
published

Abstract

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

Comment
7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027
DOI
10.1145/3840404.3848163

Closest papers

Nearest neighbours by meaning across the whole index.

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.72
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

CARB: A Characterization-Guided Framework for CNN Inference Cost Prediction and Deployment Screening

cs.AR cs.LGcs.PF ·2026-08-11 ·Linh Nguyen, Zhixin Pan
similarity 0.72
Abstract

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

0.04

AI Hardware Accelerators for Large Language Models: Architectures and the Memory Wall

cs.AR cs.DC ·2026-08-28 ·Siddharth Patel, Rohit Singh
similarity 0.70
Abstract · Review/survey article on AI hardware accelerators for large language models; compares GPUs, ASICs, FPGAs, processing-in-memory/near-memory, …

Large language models (LLMs) place unprecedented and still-growing demands on the hardware that trains and serves them. This review surveys the full landscape of AI hardware accelerators for LLMs, including general-purpose GPUs, custom ASICs such as TPUs, Trainium, Groq, and Cerebras, reconfigurable FPGAs, processing-in-memory and near-memory architectures, and emerging neuromorphic and photonic approaches across cloud and edge deployment. Using the transformer's computational structure and roofline analysis as a common framework, we show that the decisive constraint on LLM acceleration is not arithmetic but memory: the autoregressive decode phase is bandwidth-bound, the key-value cache can rival the model weights in size, and data movement dominates energy. Comparing platforms on compute, memory, energy, programmability, and scalability, we find that no single architecture is optimal across workloads: GPUs remain the flexible default and the workhorse of training; domain-specific ASICs win at scale for stable, high-volume workloads; processing-in-memory is the most promising near-term response to the memory wall, entering systems as a heterogeneous complement; and neuromorphic and photonic computing, while promising, are not yet production-ready at frontier scale. Future progress depends on hardware-algorithm co-design and heterogeneous, memory-centric systems: for large language models, the memory system has become the computer.

0.29

CHARMING: Parallel Edge AI Acceleration Across Tensor Processing and In-Memory Computation

cs.AR ·2026-11-13 ·Md Omar Faruque, Jingang Jin, João Paulo C. de Lima, Shouzhi Fang, William C. Tegge +3 more
similarity 0.70
Abstract

Edge AI increasingly relies on specialized accelerators for low-latency inference under tight resource and energy constraints, yet their efficiency remains limited by data movement. Prior work, CHARM, mitigates this overhead by overlapping data movement with computation. We observe that in-memory computing can further supplement tensor processing as a parallel accelerator while eliminating certain data movements entirely. We present CHARMING, a heterogeneous edge AI architecture that uses accuracy- and quantization-aware partitioning to distribute and concurrently execute inference workloads across tensor processing and in-memory computation. CHARMING partitions attention heads between an AIE array and an in-DRAM compute unit, balancing execution according to model architecture, sequence length, and precision while selecting heads to minimize accuracy degradation. CHARMING also integrates quantization into the AIE projection stage to further reduce data movement. We validate CHARMING end-to-end in hardware on AMD Versal VCK5000 and Alveo U200 platforms and evaluate LLM and video-generation models across multiple precisions using measured hardware results and simulation of the latest in-memory compute hardware. CHARMING improves prefill performance by up to 23.6 percent and decode performance by up to 44 percent over AIE-only acceleration. With int4 x int4 fixed-point in-memory computation, CHARMING reduces per-layer energy by up to 7.6 percent and improves energy-delay product by up to 24.7 percent, while maintaining accuracy similar to a 32-bit floating-point baseline.

0.19

Large Language Models for AI Infrastructure

cs.AI cs.CL ·2026-11-14 ·Bolin Shen, Shaoyi Huang, Yushun Dong
survey similarity 0.70
Abstract

Large language models (LLMs) are increasingly used to design, optimize, and operate the infrastructure behind AI training and serving, yet the literature remains fragmented across hardware design, machine learning systems, electronic design automation, and high-performance computing. We present a comprehensive survey of LLM-assisted AI infrastructure across its lifecycle, from accelerator design and kernel engineering to compilation, deployment, operations, data management, and energy optimization. We organize the literature by the primary resource the LLM manages: artifact-centric methods for computational artifacts, operational-centric methods for deployment context and system state, and resource-centric methods for data and energy. These categories span the lifecycle and cover AI-specific concerns such as distributed-training configuration, inference serving, GPU-cluster scheduling, and data loading. Building on this taxonomy, we conduct a cross-study quantitative synthesis of reported results. Because studies adopt heterogeneous benchmarks, baselines, hardware, and metrics, we compare methods only where evaluation conditions permit and align results along common dimensions: functional correctness, execution performance, throughput, resource and energy consumption, operational outcomes, and optimization cost, keeping each result's native metric, baseline, and setting rather than collapsing them into a single score. This comparison reveals where LLM-driven methods yield consistent gains, how reported gains in workload orchestration depend on the evaluation environment, from simulators to real clusters and production, and where evidence is still lacking. Together, the taxonomy, lifecycle perspective, and quantitative evaluation provide an evidence-grounded reference for LLM-driven engineering of AI infrastructure.

0.15

Beacon: LLM Multi-Agent Driven Hardware Design Space Exploration for Heterogeneous Multi-Chiplet Deep Learning Accelerators

cs.AR ·2026-08-31 ·Boyu Li, Zongwei Zhu, Qianyue Cao, Xi Li, Xuehai Zhou
similarity 0.69
Abstract

Heterogeneous multi-chiplet accelerators allow chiplets to be configured independently to better match different operator characteristics and improve inference efficiency. However, heterogeneity makes simulator evaluation expensive, limiting the number of iterations affordable for hardware design space exploration (HW-DSE). Mainstream data-driven methods rely mainly on final metrics and a few predefined states, and require many search iterations to implicitly learn the relationships between input parameters and optimization objectives, making them less effective in this setting. In practice, evaluators also generate detailed reports on execution timelines, resource utilization, memory accesses, and communication behavior. Large language models (LLMs) can combine domain knowledge with these reports to explicitly identify bottleneck locations, degradation causes, and parameter adjustment directions, thereby improving each design decision under limited iteration budgets. Based on this observation, we propose Beacon, a report-driven LLM multi-agent framework for heterogeneous multi-chiplet HW-DSE. Beacon employs hierarchical agents for bottleneck localization, root-cause diagnosis, and hardware candidate generation, together with an Analysis Toolbox and RAG memory for closed-loop search. Under the same limited iteration budget, Beacon reduces the composite latency-energy-monetary-cost objective by 25.1\%--93.5\% compared with random search, Bayesian optimization, and reinforcement learning.

0.16

Node-wise Feature Encoding for Neural Performance Prediction

cs.LG ·2026-08-28 ·Matthew Grenier, William Hammer, Andrew Heuer, Nikhil Krishna, Yi Wang +1 more
similarity 0.69
Abstract · 22 pages, 7 figures

As neural networks are increasingly deployed on resource constrained edge devices, accurate prediction of latency and energy is critical for efficient neural architecture search. Existing GNN and transformer based predictors achieve strong results but largely ignore node-level computational cost, limiting their ability to model performance critical operations. To address this, we introduce FeatureFormer, a neural performance predictor that incorporates explicit node-wise encodings of FLOPs, parameter counts, and memory proxies within a gated graph attention architecture. We also present NNEQ, a new large-scale energy consumption dataset that enables unified evaluation of latency and energy prediction. Extensive experiments demonstrate that FeatureFormer achieves state-of-the-art performance across both metrics, including challenging out-of-domain settings. Finally, we show that the proposed encoding is broadly applicable and consistently improves existing predictors with negligible overhead.

0.13

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.68
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33