CS Paper Radar

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis

cs.AR cs.AI ·submitted 2026-10-24 17:42 UTC · v1
published

Abstract

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

Comment
Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA
DOI
10.1145/3831252.3834137

Closest papers

Nearest neighbours by meaning across the whole index.

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.72
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.71
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

RAPID-DNN: Reliability-Aware Partitioning for Robust DNN Inference Deployment on Edge AI

cs.ET ·2026-10-08 ·Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay
similarity 0.71
Abstract

Deep neural networks (DNNs) deployed on heterogeneous edge accelerators are increasingly exposed to runtime hardware faults. Tight power and resource budgets push these platforms toward aggressive voltage scaling and limit the use of hardware fault mitigation, while process variation, thermal stress, and device aging raise fault rates further. The resulting transient bit level corruptions propagate through inference and can sharply reduce prediction accuracy. Existing DNN partitioning frameworks optimize latency and energy under fault free assumptions, so their deployment strategies often fail to sustain reliable inference in realistic operating conditions. This paper presents RAPID DNN, a reliability aware partitioning framework that adds runtime reliability as a third optimization objective alongside latency and energy. RAPID DNN first characterizes layer wise reliability through systematic fault injection in the weight and activation domains to identify vulnerability critical layers. The resulting sensitivity profile guides a three objective NSGA II optimizer that jointly minimizes inference latency, energy consumption, and expected fault induced accuracy degradation. We evaluate RAPID DNN on AlexNet, SqueezeNet, ResNet18, VGG16, and MobileNetV2 using heterogeneous Eyeriss and SIMBA accelerator profiles. Across fault models and injection probabilities, it consistently improves inference robustness over the fault agnostic baseline. Under the representative mixed random fault configuration, RAPID DNN raises average Top 1 accuracy by 9.81 percentage points and reduces average expected fault induced accuracy degradation by 36.86%, at a cost of 2.38% average latency overhead and 3.34% average energy overhead. These results show that treating reliability as a partitioning objective enables robust DNN deployment on heterogeneous edge accelerators under runtime hardware faults.

0.16

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.70
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

You Only Charge Once 2.0 : A End-to-End Analog Computing-in-Memory Architecture with Reconfigurable Switched Capacitors

cs.AR ·2026-08-11 ·Zihao Xuan, Yewen Li, Jia Chen, Wei Xuan, Xiao Huo +1 more
similarity 0.69
Abstract · 13 pages, 19 figures

Analog Computing-in-Memory (ACiM) accelerates deep neural networks by keeping weights inside memory arrays and executing dot products in the analog domain. However, modern ACiM accelerators are often limited by the "ADC wall": analog-to-digital converters consume a large fraction of energy and area, while bit-sliced execution repeatedly invokes these converters. Existing designs reduce this cost with low-resolution readout or time multiplexing, but they either lose output fidelity or introduce serialization overhead. Charge-CIM addresses this bottleneck by using switched-capacitor charge redistribution as a unified computing and conversion substrate. The same capacitor fabric performs input conversion, analog MAC, weighted shift-and-add, and readout quantization, reducing both standalone converter overhead and intermediate ADC invocations. A differential readout path further combines paired partial sums during ADC quantization, providing a highly compact and energy-efficient solution for array integration. With dataflow architecture support, we evaluated Charge-CIM on a suite of DNN benchmarks, from CNNs to Transformer models, and experimental results show that Charge-CIM reduces ADC energy by 91.7% under our evaluation setup and improves energy efficiency by 2.7x and throughput by 2.0x compared to the state-of-the-art charge-domain CIM accelerator.

0.10

Q-PACE: Dynamic Precision Allocation for Quantization-Aware Training

cs.LG ·2026-10-06 ·Alexandra Volkova, Matin Ansaripour, Erik Schultheis, Christoph H. Lampert, Dan Alistarh
similarity 0.68
Abstract

Quantization-aware training (QAT) leverages lower-precision arithmetic to reduce the cost of LLM deployment, but aggressive quantization degrades final model performance. A common remedy is mixed-precision training, in which high precision is assigned to some of the layers to maintain performance while keeping the cost constrained. This approach then requires precision assignments for model layers during training. We provide a new approach, called Q-PACE, consisting of a second-order sensitivity model that predicts the loss increase as a sum of quantization noise MSE weighted by per-layer curvature coefficients. During training, we periodically re-compute these coefficients using perturbations across layers, and re-assign precision. Pretraining and supervised fine-tuning experiments on LLMs of up to 4B parameters show that Q-PACE consistently improves over existing mixed-precision training recipes, and achieves comparable loss at substantially lower total memory budgets. We further find that quantization sensitivity is highly predictable by depth and layer type, and its stability during training allows for infrequent, cheap recalibration.

0.15

Making Analog Training Scale: Co-Designing Mapping, Optimizer, and Converters

cs.LG cs.AR ·2026-09-29 ·Zhaoxian Wu, Tayfun Gokmen, Omobayode Fagbohungbe, T. Patrick Xiao, Tianyi Chen
similarity 0.68
Abstract

Analog in-memory computing (AIMC) offers an alternative for model training by executing matrix operations directly where weights are stored. However, scaling AIMC to train modern deep models remains an open challenge due to severe hardware non-idealities, including physical weights with finite dynamic range and write granularity, analog-digital converters with finite resolution, and noisy and asymmetric updates. Guided by the insight that gradient accumulation is sensitive to precision and rounding errors, we adopt a mixed-precision training paradigm: executing forward and backward matrix multiplications in the analog domain while computing weight gradients in the digital domain. To enable scalable training, we present a holistic system-algorithm co-design that co-optimizes weight mapping to ensure well-conditioned physical and logical weight profiles, couples a preconditioned optimizer with threshold-triggered open-loop pulsing to stabilize training trajectories, and aligns converter dynamic ranges to suppress quantization errors. Evaluated via hardware-calibrated architectural simulations calibrated with electrochemical RAM measurements, our framework scales Transformer training up to $123\text{M}$ parameters with validation loss scaling as $L\propto N^{-0.231}$, where $N$ is the parameter count, comparable to $L\propto N^{-0.238}$ for digital training.

0.47

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

cs.LG ·2026-09-14 ·Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning
published similarity 0.68
Abstract · Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

0.42