CS Paper Radar

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones

cs.CV cs.LGcs.PF ·submitted 2026-09-23 15:23 UTC · v1
publishedcode/data

Abstract

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

Comment
Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davidpob99/ramp-mpq

Closest papers

Nearest neighbours by meaning across the whole index.

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.79
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

Why Sub-4-Bit Vision CNNs Collapse and Where Mixed-Precision Recovery Stops

cs.AI cs.CVcs.LG ·2026-11-17 ·Michael Schroeder
similarity 0.78
Abstract · 8 pages, 6 figures, 2 tables

Deep vision models operating in resource-constrained environments depend heavily on low-bit quantization, yet compressing weights below 4 bits frequently induces catastrophic accuracy collapse. While mixed-precision recovery strategies aim to rescue accuracy by selectively retaining high-precision parameters, the fundamental mechanics of where and why these models collapse remain poorly understood. In this study, we systematically analyze the anatomy of quantization collapse across standard Vision CNNs (including ResNet and EfficientNet backbones) evaluated on the full 50,000-image ImageNet-1k validation set. First, we map the exact progression of degradation, demonstrating that collapse is highly non-linear and concentrated in late-stage pointwise projections and depthwise layers. Second, we introduce a structured, multi-step recovery waterfall that evaluates selective integer precision (INT4/INT8) and selective floating-point scales. We show that keeping less than 5% of critical layer activations in 8-bit precision recovers up to 92% of the accuracy lost during aggressive sub-4-bit compression. Finally, we bridge the hardware reality gap by evaluating deployment performance on standard ARM and x86 CPU architectures. We show that while low-bit quantization reduces memory storage requirements, standard runtime software bit-unpacking introduces a 1.48x to 21.5x execution slowdown depending on batch size, highlighting a critical trade-off between model footprint and actual edge throughput. Our findings provide a practical blueprint for navigating the limits of sub-4-bit deployment without sacrificing hardware performance.

0.23

Q-PACE: Dynamic Precision Allocation for Quantization-Aware Training

cs.LG ·2026-10-06 ·Alexandra Volkova, Matin Ansaripour, Erik Schultheis, Christoph H. Lampert, Dan Alistarh
similarity 0.76
Abstract

Quantization-aware training (QAT) leverages lower-precision arithmetic to reduce the cost of LLM deployment, but aggressive quantization degrades final model performance. A common remedy is mixed-precision training, in which high precision is assigned to some of the layers to maintain performance while keeping the cost constrained. This approach then requires precision assignments for model layers during training. We provide a new approach, called Q-PACE, consisting of a second-order sensitivity model that predicts the loss increase as a sum of quantization noise MSE weighted by per-layer curvature coefficients. During training, we periodically re-compute these coefficients using perturbations across layers, and re-assign precision. Pretraining and supervised fine-tuning experiments on LLMs of up to 4B parameters show that Q-PACE consistently improves over existing mixed-precision training recipes, and achieves comparable loss at substantially lower total memory budgets. We further find that quantization sensitivity is highly predictable by depth and layer type, and its stability during training allows for infrequent, cheap recalibration.

0.15

ShiftQAT: Quantization-Aware Training for the Numerical Contract of a Fixed-Function Edge CNN Accelerator

cs.LG ·2026-10-15 ·Oguzhan Buyuksolak, Osman Erman Okman, Mehmet Gorkem Ulkar
code/data similarity 0.72
Abstract

Fixed-function CNN accelerators make edge inference fast and energy-efficient, but they execute only networks that obey a precise numerical contract. On the MAX7800x family, this contract requires power-of-two, per-tensor, symmetric scales, 8-bit activations and biases, integer-only arithmetic, and one statically configured shift per layer. We present ShiftQAT, the quantization-aware training (QAT) flow we developed for this family, which produces networks satisfying the contract by construction. It is the default training path of ai8x-training, the family's open-source training toolchain. ShiftQAT resolves residual, concatenation, and weight-sharing dependencies so that activation scales propagate statically and each layer's requantization reduces to one offline-configured shift. It also trains weights and biases on a joint power-of-two grid that fits the 8-bit bias budget. Among the compared methods, only ShiftQAT satisfies all of the contract's scaling constraints, including signed 8-bit activation storage. Even so, on ImageNet it matches the W8A8 accuracy drop of less constrained QAT methods and stays within 2.9 percentage points of FP32 at W4A8. On MAX78002 silicon, ShiftQAT-trained MobileNetV2 and ResNet-18 classify ImageNet images in 14.6 and 8.4 ms at 5.1 and 2.8 mJ per inference.

0.20

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.72
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

ProQuant: Progressive Quantization-aware Training for Edge MLLMs

cs.CV cs.CL ·2026-11-05 ·Yufei Xue, Yushi Huang, Jiawei Shao, Pingcheng Dong, Yonghao Tan +3 more
code/data similarity 0.71
Abstract

Multi-modal large language models (MLLMs) with impressive perception and understanding capabilities will enable a range of downstream applications. However, their substantial computational and memory requirements hinder the real-world implementation, particularly for resource-constrained edge devices. Quantization has emerged as an effective solution for deploying large models. While post-training quantization (PTQ) successfully retains the performance at moderate bit-width (e.g., W8A8), it suffers from severe performance degradation under low-bit quantization (e.g., W4A8), especially for small-scale models that are more suitable for edge deployment. In this paper, we propose ProQuant, a novel weight-activation quantization-aware training (QAT) framework tailored for low-bit MLLMs. First, to align the limited finetuning dataset distribution with the pretrained dataset distribution, we propose a self-relabeling (SRL) scheme to resample the responses of the open-source multimodal dataset. Second, we are the first to take a decoupled view of multi-modal (MM) understanding and language modeling abilities. We propose a progressive block activation (PBA) mechanism to prioritize the MM understanding recovery. We also introduce a vision-sensitive factor $\vecτ$ that effectively identifies the MM-critical layers. Extensive experiments across various benchmarks, covering models with 2B-8B parameters, show that ProQuant significantly outperforms existing methods. For example, our W4A8 Qwen3-VL-2B-Instruct improves average accuracy by impressively 6.6% and achieves performance comparable to full precision counterparts with only approximately 1% performance drop. Code is available at https://github.com/yufeixue-ai/ProQuant/.

0.28

RAPID-DNN: Reliability-Aware Partitioning for Robust DNN Inference Deployment on Edge AI

cs.ET ·2026-10-08 ·Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay
similarity 0.71
Abstract

Deep neural networks (DNNs) deployed on heterogeneous edge accelerators are increasingly exposed to runtime hardware faults. Tight power and resource budgets push these platforms toward aggressive voltage scaling and limit the use of hardware fault mitigation, while process variation, thermal stress, and device aging raise fault rates further. The resulting transient bit level corruptions propagate through inference and can sharply reduce prediction accuracy. Existing DNN partitioning frameworks optimize latency and energy under fault free assumptions, so their deployment strategies often fail to sustain reliable inference in realistic operating conditions. This paper presents RAPID DNN, a reliability aware partitioning framework that adds runtime reliability as a third optimization objective alongside latency and energy. RAPID DNN first characterizes layer wise reliability through systematic fault injection in the weight and activation domains to identify vulnerability critical layers. The resulting sensitivity profile guides a three objective NSGA II optimizer that jointly minimizes inference latency, energy consumption, and expected fault induced accuracy degradation. We evaluate RAPID DNN on AlexNet, SqueezeNet, ResNet18, VGG16, and MobileNetV2 using heterogeneous Eyeriss and SIMBA accelerator profiles. Across fault models and injection probabilities, it consistently improves inference robustness over the fault agnostic baseline. Under the representative mixed random fault configuration, RAPID DNN raises average Top 1 accuracy by 9.81 percentage points and reduces average expected fault induced accuracy degradation by 36.86%, at a cost of 2.38% average latency overhead and 3.34% average energy overhead. These results show that treating reliability as a partitioning objective enables robust DNN deployment on heterogeneous edge accelerators under runtime hardware faults.

0.16

Achieving Near-Zero-Overhead Multi-Model Hierarchical Classification in Real-Time Detection Pipelines

cs.CV cs.DCcs.LG ·2026-08-12 ·Vaishnav Raju
similarity 0.69
Abstract · 14 pages, 17 figures, 5 tables. Submitted to Journal of Real-Time Image Processing

Edge-deployed vision systems in target recognition, surveillance, autonomous vehicles, and drone domains require hierarchical inference pipelines where a detection model identifies objects of interest and downstream classifiers provide fine-grained attribute analysis. Running all models on the GPU creates a serial bottleneck that limits real-time throughput as pipeline stages grow. Modern edge SoCs pair GPUs with dedicated neural accelerators (NPUs, DLAs) capable of concurrent execution, yet deploying custom models on these accelerators remains impractical due to strict operator constraints, quantization incompatibilities, and an undocumented end-to-end pipeline. We target NVIDIA Jetson DLA cores as the representative platform. We present a five-step methodology for zero GPU fallback DLA INT8 deployment of classification backbones, comprising architecture adaptation, manual dynamic range workaround to rescue TensorRT's implicit quantization (recovering 94.0% accuracy from implicit quantization's 75%) for rapid pipeline validation before explicit quantization, quantization-aware training, ONNX graph surgery for DLA compilation, and a concurrent GPU-detection/DLA-classification inference pipeline. We document nine engineering constraints with root-cause analysis and generalizable solutions. Validation on a dual-head person attribute classifier running on DLA alongside a GPU object detector on a Jetson Orin NX demonstrates near-zero pipeline overhead (12.5 vs. 13.3~FPS detector-only at 1080p), with dual-DLA scaling at no additional cost. The methodology is backbone-agnostic and generalizes to any detection-classification edge pipeline.

0.12