CS Paper Radar

RAPID-DNN: Reliability-Aware Partitioning for Robust DNN Inference Deployment on Edge AI

Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay

cs.ET ·submitted 2026-10-08 15:08 UTC · v1

Abstract

Deep neural networks (DNNs) deployed on heterogeneous edge accelerators are increasingly exposed to runtime hardware faults. Tight power and resource budgets push these platforms toward aggressive voltage scaling and limit the use of hardware fault mitigation, while process variation, thermal stress, and device aging raise fault rates further. The resulting transient bit level corruptions propagate through inference and can sharply reduce prediction accuracy. Existing DNN partitioning frameworks optimize latency and energy under fault free assumptions, so their deployment strategies often fail to sustain reliable inference in realistic operating conditions. This paper presents RAPID DNN, a reliability aware partitioning framework that adds runtime reliability as a third optimization objective alongside latency and energy. RAPID DNN first characterizes layer wise reliability through systematic fault injection in the weight and activation domains to identify vulnerability critical layers. The resulting sensitivity profile guides a three objective NSGA II optimizer that jointly minimizes inference latency, energy consumption, and expected fault induced accuracy degradation. We evaluate RAPID DNN on AlexNet, SqueezeNet, ResNet18, VGG16, and MobileNetV2 using heterogeneous Eyeriss and SIMBA accelerator profiles. Across fault models and injection probabilities, it consistently improves inference robustness over the fault agnostic baseline. Under the representative mixed random fault configuration, RAPID DNN raises average Top 1 accuracy by 9.81 percentage points and reduces average expected fault induced accuracy degradation by 36.86%, at a cost of 2.38% average latency overhead and 3.34% average energy overhead. These results show that treating reliability as a partitioning objective enables robust DNN deployment on heterogeneous edge accelerators under runtime hardware faults.

Closest papers

Nearest neighbours by meaning across the whole index.

JASPER: Special Session on Joint Reliability And Security Assessment of SPlit Computing for Edge Robustness

cs.CR cs.ARcs.DCcs.LG ·2026-10-03 ·Enrico Magliano, Giuseppe Esposito, Amir Hossein Shahdadian, Rama Mounika Kodamanchili, Juan David Guerrero Balaguera +11 more
published similarity 0.75
Abstract · 11 pages, 9 figures. Accepted as a special session paper at the 2026 IEEE International Symposium on Defect and Fault Tolerance in VLSI and …

Split Computing (SC) enables efficient deployment of Deep Neural Networks (DNNs) by partitioning inference between edge devices and cloud servers. However, intermediate feature representations are simultaneously exposed to hardware faults and adversarial attacks, which are traditionally evaluated independently. This paper presents a unified framework for the joint assessment of reliability and security in Split Computing. First, reliability is characterized through neuron-level fault injection using the Mean Relative Accuracy Degradation (MRAD) while security through feature-map-aware adversarial attacks simulations using the Attack Success Rate (ASR). Based on these complementary analyses, the Joint Vulnerability Score (JVS) is introduced, along with a confidence-aware extension that jointly captures prediction errors and confidence degradation. The framework is evaluated on ten Split Computing configurations based on ResNet-50 trained on ILSVRC-2012. Experimental results show substantial differences across compression strategies, with MRAD ranging from 44.3% to 61.2% under fault injection, while adversarial attacks achieve up to 98.8% ASR. Furthermore, the proposed joint metrics reveal vulnerability trends that remain hidden when reliability and security are analyzed independently, providing a more comprehensive methodology for designing dependable Split Computing systems.

0.27

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.71
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.71
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

TreeFI: Value-Aware Statistical Fault Injection for Deep Neural Networks

cs.AR cs.AI ·2026-09-04 ·Noam Bires, Marcello Traiola, Angeliki Kritikakou, Elisa Fromont
top venuehot direction similarity 0.70
Abstract · Accepted at ICCAD 2026

Reliability evaluation of deep neural networks under hardware faults commonly relies on fault injection, but exhaustive campaigns are intractable for modern models and datasets. Statistical fault injection reduces this cost, yet existing approaches still require large injection budgets because they do not explicitly exploit a key property of floating-point faults: the effect of a bit flip depends strongly on the value being corrupted. We propose TreeFI, a value-aware statistical fault-injection methodology for FP32 single-bit faults in DNN activations and weights. TreeFI partitions each layer's value distribution into intervals with similar expected bit-flip behavior, learned using regression trees, and allocates injections across these intervals according to their relevance for failure-rate estimation. This stratified allocation preserves the target confidence and error margin while avoiding unnecessary injections in low-impact regions of the fault space. We validate TreeFI on CNN and Transformer models using CIFAR-10 and ImageNet. On ResNet8, where exhaustive activation fault injection is feasible, TreeFI provides more accurate estimates than state-of-the-art statistical FI baselines under the same campaign setting. Across the evaluated models, TreeFI reduces the required injection budget by up to 72.1x, with average reductions of 44.9x for activation faults and 11.2x for the executed weight campaigns.

0.52

BARE-AI: Bit-Flip Attack Resilience in AI Hardware through Built-in Performance Monitors

cs.CR ·2026-10-06 ·Habibur Rahaman, Swastik Bhattacharya, Sanjay Das, Kanad Basu, Swarup Bhunia
similarity 0.69
Abstract

Deep Neural Networks (DNNs) are integral to many safety critical systems, yet they remain highly vulnerable to bit-flip attacks (BFAs), where a few memory level perturbations can drastically degrade accuracy. Existing defenses incur significant hardware overhead, depend on retraining, or fail against targeted flips. We propose BARE-AI, a runtime framework that detects, localizes, and mitigates BFAs during inference. BARE-AI introduces AI Performance Counters (APCs), lightweight hardware monitors in the accelerator datapath that capture per-layer activation statistics such as sparsity, entropy, kurtosis, and spectral shift. These are analyzed by the Predictive Unit for Layer Security Evaluation (PULSE), a compact detector trained offline as an ensemble of classifiers and realized on-chip as a small neural engine. For explainability and recovery, BARE-AI introduces an Activation Shift Index (ASI) for layer level fault localization and a z-score based repair that resets anomalous weights toward clean layer statistics. Across CNNs, Vision Transformers, and Large Language Models under random, targeted, adaptive, and magnitude based BFAs, BARE-AI achieves up to 98% detection accuracy on vision models and 74% to 95% on language models, restores near clean accuracy for CNNs and ViTs, and provides partial recovery for LLMs. Synthesized at 28nm, the monitoring infrastructure incurs under 3% energy, under 4% area, and about 10% latency overhead, with a configurable operating point that reduces latency overhead to about 6%. Unlike error correcting codes, whose redundancy grows with the number of tolerated flips, BARE-AI's overhead remains constant regardless of attack strength, making it attractive for resource constrained, safety critical edge applications such as autonomous systems, energy, and healthcare.

0.44

Exploring the Trade-Off Between Structured Pruning and Fault Tolerance in Deep Neural Networks for Space Applications

cs.LG ·2026-10-02 ·Toon Vinck, Naïn Jonckers, Jaro De Roose, Jeffrey Prinzie, Peter Karsmakers
similarity 0.69
Abstract · 5 pages, 3 figures, SPAICE 2026 Conference

Deep Neural Networks (DNNs) inherently exhibit a degree of robustness to bit-level faults due to their distributed representation of information. As a model increases in width, this information becomes more dispersed, theoretically reducing the impact of any single bit fault. In this paper, we empirically investigate the relationship between model width and robustness to Single Event Upsets (SEUs). We conduct a comprehensive experiment in which baseline models undergo iterative structured pruning to reduce their width while preserving task performance as much as possible. At each pruning stage, we run a targeted fault-injection campaign to evaluate the model's performance under simulated bit-flip scenarios. Our results show that, although structured pruning increases per-inference sensitivity to faults by reducing redundancy, this effect is effectively counterbalanced by shorter execution time, which lowers the probability of encountering an SEU. These findings suggest that structured pruning can yield significant energy and latency savings without compromising overall reliability, providing useful guidance for designing robust AI systems for space applications.

0.11

Faults That Fortify: CNN Adversarial Robustness via GPU Undervolting

cs.LG cs.ARcs.CR ·2026-08-20 ·Behnam Omidi, Ahmad Tahmasivand, Husam Alsyouri, Saba Al-Sayouri, Chongzhou Fang +2 more
similarity 0.68
Abstract · 6 pages, 4 figures, 1 table. Submitted to IEEE HOST 2027

Convolutional Neural Networks (CNNs) face a dual challenge: vulnerability to adversarial attacks and prohibitive training cost. Adversarial training is effective but expensive, a burden that grows as learning shifts to the energy-constrained edge. This paper addresses both through GPU undervolting during training. Reducing supply voltage introduces stochastic perturbations that act as implicit regularization, improving robustness while lowering power. We characterize undervolting-induced faults at the bit level, then train LeNet, VGG-6, and MobileNetV3 on MNIST and CIFAR-10 under two training regimes, standard and adversarial, each at nominal and undervolted voltage, and evaluate all models against adversarial attacks. In both regimes, the undervolted model consistently achieves higher adversarial accuracy than its nominal-voltage counterpart, showing that hardware-induced faults strengthen even adversarial training. Because dynamic power scales quadratically with supply voltage, these robustness gains arrive with substantial energy savings. GPU undervolting is therefore a readily deployable hardware-level defense requiring no algorithmic change, and opens a promising direction in which robustness and energy efficiency move together.

0.38

UniExit: A Unified Latency-Aware Early-Exit Runtime for Heterogeneous Edge AI

cs.DC ·2026-11-06 ·Yuhang Guan, Huanle Zhang, Xiaomin Ouyang, Zhidan Liu
published similarity 0.67
Abstract · 15 pages, 20 figures. Accepted to ACM SenSys 2027 (The International Conference on Embedded Artificial Intelligence and Sensing Systems)

Edge applications increasingly combine CNN-based perception with edge-deployable Transformer-based language models, but deploying such heterogeneous workloads on resource-constrained devices is challenging because inference latency varies with both input difficulty and runtime hardware state. Early-exit inference reduces computation by terminating at intermediate stages, yet existing methods are often model-specific and rely on static latency profiles that become stale under dynamic edge conditions. This paper presents UniExit, a unified latency-aware early-exit runtime for heterogeneous edge AI. UniExit abstracts CNN blocks and Transformer layers as ordered stages and applies a common latency-aware routing policy while retaining model-specific quality mechanisms. It predicts the cost of reaching the next exit from runtime state and inference progress to make budget-aware continue-or-exit decisions. UniExit combines runtime-state-aware latency prediction, cache-based prediction reuse, trend-aware fallback, and CNN-specific exit stabilization to provide low-overhead and robust online control. We implement UniExit on multiple edge and edge-cloud platforms and evaluate it with representative CNN and Transformer-based language-model workloads. Across single-workload, concurrent heterogeneous, and edge-cloud settings, UniExit consistently improves deadline satisfaction and latency-accuracy trade-offs over existing progressive inference baselines, while reducing redundant exit-module computation and task-level energy consumption.

0.32