CS Paper Radar

Exploring the Trade-Off Between Structured Pruning and Fault Tolerance in Deep Neural Networks for Space Applications

Toon Vinck, Naïn Jonckers, Jaro De Roose, Jeffrey Prinzie, Peter Karsmakers

cs.LG ·submitted 2026-10-02 10:36 UTC · v2

Abstract

Deep Neural Networks (DNNs) inherently exhibit a degree of robustness to bit-level faults due to their distributed representation of information. As a model increases in width, this information becomes more dispersed, theoretically reducing the impact of any single bit fault. In this paper, we empirically investigate the relationship between model width and robustness to Single Event Upsets (SEUs). We conduct a comprehensive experiment in which baseline models undergo iterative structured pruning to reduce their width while preserving task performance as much as possible. At each pruning stage, we run a targeted fault-injection campaign to evaluate the model's performance under simulated bit-flip scenarios. Our results show that, although structured pruning increases per-inference sensitivity to faults by reducing redundancy, this effect is effectively counterbalanced by shorter execution time, which lowers the probability of encountering an SEU. These findings suggest that structured pruning can yield significant energy and latency savings without compromising overall reliability, providing useful guidance for designing robust AI systems for space applications.

Comment
5 pages, 3 figures, SPAICE 2026 Conference

Closest papers

Nearest neighbours by meaning across the whole index.

TreeFI: Value-Aware Statistical Fault Injection for Deep Neural Networks

cs.AR cs.AI ·2026-09-04 ·Noam Bires, Marcello Traiola, Angeliki Kritikakou, Elisa Fromont
top venuehot direction similarity 0.72
Abstract · Accepted at ICCAD 2026

Reliability evaluation of deep neural networks under hardware faults commonly relies on fault injection, but exhaustive campaigns are intractable for modern models and datasets. Statistical fault injection reduces this cost, yet existing approaches still require large injection budgets because they do not explicitly exploit a key property of floating-point faults: the effect of a bit flip depends strongly on the value being corrupted. We propose TreeFI, a value-aware statistical fault-injection methodology for FP32 single-bit faults in DNN activations and weights. TreeFI partitions each layer's value distribution into intervals with similar expected bit-flip behavior, learned using regression trees, and allocates injections across these intervals according to their relevance for failure-rate estimation. This stratified allocation preserves the target confidence and error margin while avoiding unnecessary injections in low-impact regions of the fault space. We validate TreeFI on CNN and Transformer models using CIFAR-10 and ImageNet. On ResNet8, where exhaustive activation fault injection is feasible, TreeFI provides more accurate estimates than state-of-the-art statistical FI baselines under the same campaign setting. Across the evaluated models, TreeFI reduces the required injection budget by up to 72.1x, with average reductions of 44.9x for activation faults and 11.2x for the executed weight campaigns.

0.52

A Radiation-Hardened, Fault-Aware Quantized Neural Network That Self-Heals

cs.LG astro-ph.IMhep-exnucl-ex+1 ·2026-10-20 ·Peter Xiangyuan Ma, Joshua S. Bloom
similarity 0.70
Abstract · 22 pages, 4 figures, 11 tables

Deep learning (DL) models are increasingly being deployed into radiation-challenging environments in spacecraft, particle accelerators, and, soon, space-based data centers. Instantiated as a learned orchestration of numbers stored in persistent memory, models are susceptible to continual degradation as high-energy particles corrupt data. At inference time, new data passed through the network fundamentally break the off-line assumptions and guarantees of a static model determined during training. To preserve the quality and efficacy of the models, fault tolerance against bit flips is a clear objective. In this work we developed a runtime method for repairing the quantized weights of neural networks (NNs) after bit flips on commodity, commercial off-the-shelf (COTS) hardware, without storing extra replicas. Our work extends the well-established Fault-Aware Training (FAT) paradigm by adding an alignment penalty to concentrate undamaged activations and weights into a low-rank subspace, and we then reconstruct flagged corrupted coordinates from the uncorrupted survivors. We call this method {\it Projection Healing} and apply it to six regression benchmarks on quantized NNs. Holding a FAT checkpoint fixed and toggling only the runtime heal gives a further ${\sim}23\%$ reduction in the native-unit excess integral. Across those datasets the method extends the operational scrub interval by a median of $2.04\times$ at a $+5\%$ RMSE degradation and $1.96\times$ at $+50\%$, compared with $1.62\times$ and $1.07\times$ for classical Single Error Correction, Double Error Detection (SECDED). This introduces a new path towards designing resilient data-driven models, complementing established hardware redundancy, ECC, and FAT-based techniques.

0.25

RAPID-DNN: Reliability-Aware Partitioning for Robust DNN Inference Deployment on Edge AI

cs.ET ·2026-10-08 ·Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay
similarity 0.69
Abstract

Deep neural networks (DNNs) deployed on heterogeneous edge accelerators are increasingly exposed to runtime hardware faults. Tight power and resource budgets push these platforms toward aggressive voltage scaling and limit the use of hardware fault mitigation, while process variation, thermal stress, and device aging raise fault rates further. The resulting transient bit level corruptions propagate through inference and can sharply reduce prediction accuracy. Existing DNN partitioning frameworks optimize latency and energy under fault free assumptions, so their deployment strategies often fail to sustain reliable inference in realistic operating conditions. This paper presents RAPID DNN, a reliability aware partitioning framework that adds runtime reliability as a third optimization objective alongside latency and energy. RAPID DNN first characterizes layer wise reliability through systematic fault injection in the weight and activation domains to identify vulnerability critical layers. The resulting sensitivity profile guides a three objective NSGA II optimizer that jointly minimizes inference latency, energy consumption, and expected fault induced accuracy degradation. We evaluate RAPID DNN on AlexNet, SqueezeNet, ResNet18, VGG16, and MobileNetV2 using heterogeneous Eyeriss and SIMBA accelerator profiles. Across fault models and injection probabilities, it consistently improves inference robustness over the fault agnostic baseline. Under the representative mixed random fault configuration, RAPID DNN raises average Top 1 accuracy by 9.81 percentage points and reduces average expected fault induced accuracy degradation by 36.86%, at a cost of 2.38% average latency overhead and 3.34% average energy overhead. These results show that treating reliability as a partitioning objective enables robust DNN deployment on heterogeneous edge accelerators under runtime hardware faults.

0.16

BARE-AI: Bit-Flip Attack Resilience in AI Hardware through Built-in Performance Monitors

cs.CR ·2026-10-06 ·Habibur Rahaman, Swastik Bhattacharya, Sanjay Das, Kanad Basu, Swarup Bhunia
similarity 0.68
Abstract

Deep Neural Networks (DNNs) are integral to many safety critical systems, yet they remain highly vulnerable to bit-flip attacks (BFAs), where a few memory level perturbations can drastically degrade accuracy. Existing defenses incur significant hardware overhead, depend on retraining, or fail against targeted flips. We propose BARE-AI, a runtime framework that detects, localizes, and mitigates BFAs during inference. BARE-AI introduces AI Performance Counters (APCs), lightweight hardware monitors in the accelerator datapath that capture per-layer activation statistics such as sparsity, entropy, kurtosis, and spectral shift. These are analyzed by the Predictive Unit for Layer Security Evaluation (PULSE), a compact detector trained offline as an ensemble of classifiers and realized on-chip as a small neural engine. For explainability and recovery, BARE-AI introduces an Activation Shift Index (ASI) for layer level fault localization and a z-score based repair that resets anomalous weights toward clean layer statistics. Across CNNs, Vision Transformers, and Large Language Models under random, targeted, adaptive, and magnitude based BFAs, BARE-AI achieves up to 98% detection accuracy on vision models and 74% to 95% on language models, restores near clean accuracy for CNNs and ViTs, and provides partial recovery for LLMs. Synthesized at 28nm, the monitoring infrastructure incurs under 3% energy, under 4% area, and about 10% latency overhead, with a configurable operating point that reduces latency overhead to about 6%. Unlike error correcting codes, whose redundancy grows with the number of tolerated flips, BARE-AI's overhead remains constant regardless of attack strength, making it attractive for resource constrained, safety critical edge applications such as autonomous systems, energy, and healthcare.

0.44

JASPER: Special Session on Joint Reliability And Security Assessment of SPlit Computing for Edge Robustness

cs.CR cs.ARcs.DCcs.LG ·2026-10-03 ·Enrico Magliano, Giuseppe Esposito, Amir Hossein Shahdadian, Rama Mounika Kodamanchili, Juan David Guerrero Balaguera +11 more
published similarity 0.65
Abstract · 11 pages, 9 figures. Accepted as a special session paper at the 2026 IEEE International Symposium on Defect and Fault Tolerance in VLSI and …

Split Computing (SC) enables efficient deployment of Deep Neural Networks (DNNs) by partitioning inference between edge devices and cloud servers. However, intermediate feature representations are simultaneously exposed to hardware faults and adversarial attacks, which are traditionally evaluated independently. This paper presents a unified framework for the joint assessment of reliability and security in Split Computing. First, reliability is characterized through neuron-level fault injection using the Mean Relative Accuracy Degradation (MRAD) while security through feature-map-aware adversarial attacks simulations using the Attack Success Rate (ASR). Based on these complementary analyses, the Joint Vulnerability Score (JVS) is introduced, along with a confidence-aware extension that jointly captures prediction errors and confidence degradation. The framework is evaluated on ten Split Computing configurations based on ResNet-50 trained on ILSVRC-2012. Experimental results show substantial differences across compression strategies, with MRAD ranging from 44.3% to 61.2% under fault injection, while adversarial attacks achieve up to 98.8% ASR. Furthermore, the proposed joint metrics reveal vulnerability trends that remain hidden when reliability and security are analyzed independently, providing a more comprehensive methodology for designing dependable Split Computing systems.

0.27

FailBench: Evaluating Fault Tolerance Across Distributed Training Architectures

cs.DC ·2026-10-06 ·Khaled Aljbab, Amine Barrak
similarity 0.64
Abstract

Distributed deep learning relies on data, pipeline, tensor, and hybrid parallelism, yet fault-tolerance mechanisms are typically evaluated only on the architecture for which they were designed. This leaves practitioners with little guidance when choosing mechanisms across architectures. FailBench provides a unified evaluation harness covering seven distributed training architectures, eight crash-fault-tolerance mechanisms and a no-FT baseline, and single, concurrent, and cascading fail-stop failures. We evaluate 142 (architecture, mechanism, trace) combinations on an 8xV100 cluster, with per-rank checkpoint states ranging from 205 MB to 2.7 GB. Three findings emerge. First, no mechanism is universally best: on A2, disk checkpointing has the lowest steady-state overhead (0.5%), in-memory replication restores fastest (~17 ms), and just-in-time checkpointing avoids periodic steady-state checkpoint cost but incurs ~0.9 s upon failure. When process-group re-formation takes seconds, mechanisms differ more in runtime overhead than restore speed. Second, gossip training increases sample throughput by 17.9% after losing a worker, yet shows no detectable improvement in loss progress over a matched no-fault baseline. Third, mechanism cost depends strongly on architecture: in-memory replication overhead ranges from 3.7% to 176%. We translate these findings into a decision framework for selecting fault-tolerance mechanisms and release FailBench as an open artifact.

0.18

Fault-tolerant foundation models

cs.LG cs.AIcs.AR ·2026-10-07 ·Trevor McCourt, Ila R. Fiete, Isaac L. Chuang
hot direction similarity 0.64
Abstract

Emerging computer hardware often trades reliability for energy efficiency; here we show that large-language models (LLMs) can be trained to tolerate this unreliability, and that rather than degrading, their error resilience actually increases as they grow. Modified neural scaling laws inferred from 40,000 GPU-hours of training runs on simulated faulty digital hardware quantify this trend and suggest that models learn to compute within "good" error-correcting codes, whose relative overhead remains finite no matter how large the model gets. This finding leads us to conjecture that appropriately trained LLMs may be formally fault-tolerant; if true, running AI inference on low energy, faulty hardware may be a path to substantial energy savings over the status quo.

0.34

Towards Verifying Neural Networks Against Multi-Parameter Bit-Flip Perturbations

cs.CR ·2026-10-06 ·Hai Duong, Thanh Le, Ho Nguyen, ThanhVu Nguyen
similarity 0.64
Abstract

Hardware faults can flip bits in the stored weights of a quantized neural network, potentially compromising its predictions. While such faults typically affect multiple parameters simultaneously, existing verifiers are limited to single-parameter perturbations due to the combinatorial explosion of possible flip locations in large networks. We present mBFV (m-BitFlip Verifier), an efficient verification framework that proves robustness against simultaneous bit flips across multiple parameters without explicitly enumerating these combinations. mBFV achieves this via a novel multi-parameter bound propagation technique that directly aggregates the m worst-case contributions. To further tighten these bounds, mBFV employs a branch-and-bound mechanism over perturbation locations, partitioning the potential flips to smaller groups of neurons. Evaluated on 625 instances, mBFV successfully verifies 293, significantly outperforming a prior single-parameter verifier (38 verified instances) and an exact mixed-integer linear programming baseline (0 verified instances). Notably, while these baselines are restricted to single-parameter flips on small networks (up to 13k parameters), mBFV scales to verify networks with up to 1.15M parameters against up to four simultaneous parameter flips.

0.22