CS Paper Radar

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning

cs.LG ·submitted 2026-09-14 13:17 UTC · v1
published

Abstract

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

Comment
Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

Closest papers

Nearest neighbours by meaning across the whole index.

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.68
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

RACE-AIMC: Selective Inference for Heterogeneous Analog In-Memory Accelerators at the Edge

cs.ET cs.ARcs.LG ·2026-09-02 ·Osama Yousuf, Martin Lueker-Boden
theoryhot direction similarity 0.68
Abstract · 6 pages, 2 figures, 3 tables

Analog in-memory computing (AIMC) speeds up neural-network inference by doing the arithmetic directly inside a memory array, instead of shuttling weights back and forth between memory and a processor. This saves energy, but the physical devices that store the weights are imperfect: programming errors, electrical noise, limited-resolution converters, and outright broken cells all distort the computation, and every physical chip is distorted in its own way. A designer with several such chips available faces an uncomfortable choice: run all of them and combine the answers (safe, but wasteful of energy), or trust a single chip blindly (cheap, but with no guarantee on how often it is wrong). This paper introduces RACE-AIMC (Risk-Aware Certified Ensemble for AIMC), a framework that resolves this choice with statistics rather than guesswork. Offline, RACE-AIMC studies a pool of physical accelerators, picks the single best one for a given energy budget, and computes a mathematically exact upper bound on how often that accelerator will be wrong when it chooses to answer. Online, only that one accelerator is switched on; a lightweight check decides whether to accept its answer or defer to a fallback. In our simulations using a noisy weight mapping and multiple independent test runs, every certified bound stayed under a 10% error target (mean bound 7.83% +- 0.89%, with 70.88% +- 0.98% of inputs answered directly). The resulting system matches the accuracy of a clean digital baseline while cutting modeled energy use by 69.02% relative to always running every accelerator in the pool.

0.34

Hardware-conscious Software Training for Deep Neural Network Inference Accelerator Chips to Recover Accuracy Degradation due to Hardware Variabilities

cs.AR cs.ET ·2026-09-02 ·Shuchao Gao, Takashi Ohsawa
similarity 0.66
Abstract · 2 pages, 11 figures, 2 tables. Presented at SSDM 2023

Deep neural network (DNN) has been widely applied in various industries. Specialized chips are being discussed for the purpose of achieving lower power consumption with higher throughput. Hardware variations introduced during the process of chip manufacturing are the main reason for affecting the inference accuracies. In this paper, we propose hardware-conscious software training (HCST) method which enables high inference accuracies even under the influence of hardware variations.

0.44

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.64
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

Sustainable Edge Vision via Empirically Calibrated DVFS: Eliminating Thermal Throttling on Passively Cooled Hardware

cs.AR cs.CVcs.LG ·2026-09-04 ·Aayush Marasini, Zhaoxian Zhou
code/data similarity 0.64
Abstract · 7 pages, 5 figures, 8 tables, Code, datasets, and frozen artifacts available at: https://github.com/Aayush-Marasini/sustained-edge-vision

Passive cooling eliminates the energy overhead and mechanical failure modes of fans, making it attractive for edge deployment, yet sustained Deep Neural Network (DNN) inference on passively cooled edge Systems-on-Chip (SoCs) is bottlenecked by thermal throttling. To address this, we propose an empirically calibrated, state-aware Dynamic Voltage and Frequency Scaling (DVFS) scheduler. Unlike heuristic-driven controllers, our methodology utilizes time-domain guards and absolute temperature bounds, with derivative triggers acting as safeguards against sharp thermal spikes. Evaluated on a passively cooled Raspberry Pi 5 running YOLOv8n, our scheduler eliminates all observed thermal throttling events during sustained 30-minute workloads. It outperforms a temperature-only reactive baseline by achieving a 6.8% higher frame rate (Cohen's d = 8.73) while consuming 1.9% less energy per frame. Furthermore, our optimized passive scheduling surpasses an actively cooled reference system in energy efficiency (Joules/frame), though active cooling remains superior for raw throughput. Through isolated ablations, we show that the dwell guard is necessary for run-to-run reproducibility. Finally, exploratory boundary probes indicate that the passive operating envelope closes at ambient temperatures ($\ge 27^\circ$C) where nonlinear leakage defeats DVFS-based control. These results indicate that, within the mapped envelope, correct scheduling can make mechanical cooling unnecessary for sustained edge inference on this platform.

0.37

Lock-in EP: An In-Situ Training Algorithm for Oscillatory Hardware

cs.LG ·2026-10-05 ·Sowjanya Tammali, Wilkie Olin-Ammentorp
similarity 0.63
Abstract

Analog hardware platforms offer the potential to reduce energy consumption over digital architectures, but in order to succeed, large-scale analog systems must also be able to operate with or recover from the variability of their components. Towards this goal, we derive and demonstrate the lock-in equilibrium propagation (LIEP) training method. LIEP provides local gradient information for each component in an oscillatory network without separate forward and backward sweeps, potentially allowing for in-situ learning capabilities on analog oscillatory hardware platforms. We demonstrate that LIEP can be used both for ab-initio training as well as recovering performance when pre-trained parameters are perturbed. We show that LIEP can be formulated as a three-factor update rule, and suggest that although the method is currently only validated on shallow networks, alternate architectures may allow it to extend to deep and large-scale networks addressing complex tasks.

0.21

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.62
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

You Only Charge Once 2.0 : A End-to-End Analog Computing-in-Memory Architecture with Reconfigurable Switched Capacitors

cs.AR ·2026-08-11 ·Zihao Xuan, Yewen Li, Jia Chen, Wei Xuan, Xiao Huo +1 more
similarity 0.62
Abstract · 13 pages, 19 figures

Analog Computing-in-Memory (ACiM) accelerates deep neural networks by keeping weights inside memory arrays and executing dot products in the analog domain. However, modern ACiM accelerators are often limited by the "ADC wall": analog-to-digital converters consume a large fraction of energy and area, while bit-sliced execution repeatedly invokes these converters. Existing designs reduce this cost with low-resolution readout or time multiplexing, but they either lose output fidelity or introduce serialization overhead. Charge-CIM addresses this bottleneck by using switched-capacitor charge redistribution as a unified computing and conversion substrate. The same capacitor fabric performs input conversion, analog MAC, weighted shift-and-add, and readout quantization, reducing both standalone converter overhead and intermediate ADC invocations. A differential readout path further combines paired partial sums during ADC quantization, providing a highly compact and energy-efficient solution for array integration. With dataflow architecture support, we evaluated Charge-CIM on a suite of DNN benchmarks, from CNNs to Transformer models, and experimental results show that Charge-CIM reduces ADC energy by 91.7% under our evaluation setup and improves energy efficiency by 2.7x and throughput by 2.0x compared to the state-of-the-art charge-domain CIM accelerator.

0.10