CS Paper Radar

Hardware-conscious Software Training for Deep Neural Network Inference Accelerator Chips to Recover Accuracy Degradation due to Hardware Variabilities

Shuchao Gao, Takashi Ohsawa

cs.AR cs.ET ·submitted 2026-09-02 06:13 UTC · v1

Abstract

Deep neural network (DNN) has been widely applied in various industries. Specialized chips are being discussed for the purpose of achieving lower power consumption with higher throughput. Hardware variations introduced during the process of chip manufacturing are the main reason for affecting the inference accuracies. In this paper, we propose hardware-conscious software training (HCST) method which enables high inference accuracies even under the influence of hardware variations.

Comment
2 pages, 11 figures, 2 tables. Presented at SSDM 2023
Journal ref
Extended Abstracts of the International Conference on Solid State Devices and Materials (SSDM), Nagoya, Japan, September 2023, pp. 427-428
DOI
10.7567/SSDM.2023.J-5-03

Closest papers

Nearest neighbours by meaning across the whole index.

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.67
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

cs.LG ·2026-09-14 ·Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning
published similarity 0.66
Abstract · Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

0.41

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.64
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.61
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.59
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

Model Compression and Hardware-Aware Acceleration for Deep Learning on FPGAs: A Co-Design Taxonomy and Comparative Analysis

cs.AR ·2026-08-21 ·Peter Forcha, H. Kajekusumadhar, Mbua Peter, Muhammed Kawser, Audrey Cyriell Mo +1 more
survey similarity 0.59
Abstract

Deploying deep neural networks on Field-Programmable Gate Arrays (FPGAs) requires joint reasoning about model compression and hardware acceleration, however the most comprehensive existing cross-platform treatment of this space, Deng et al.~\cite{deng2020model}, compared compression techniques against CPU, GPU, FPGA, and ASIC targets at the level of broad, qualitative trade-offs, and not specific FPGA resource consequences. This survey instead restricted the scope to FPGAs alone and organized 25 compression-hardware co-design case studies (2015--2026) into a five-category taxonomy defined by which FPGA resources each strategy primarily reshapes: DSP-eliminating, DSP-repurposing/mixed-precision, sparsity-exploiting, memory-hierarchy-driven, and toolchain/deployment-level. Normalizing these case studies along a common set of dimensions (compression ratio, accuracy change, throughput, energy efficiency, and DSP/LUT/BRAM utilization) surfaces a central, quantitative finding; of the 25 reviewed works, only \emph{one} reported a compression ratio and accuracy change measured against a single common baseline, and only \emph{two} reported energy efficiency normalized against a common GPU baseline, exposing a field-wide characterization gap that no individual toolchain (FINN, HLS4ML, Vitis AI, or DNNWeaver) resolves on its own. Building on this taxonomy and meta-analysis, we formalize six open challenges: toolchain fragmentation, accuracy--efficiency characterization, automated mixed-precision optimization, sparse computation reliability, persistent memory bottlenecks, and FPGA-based training. Each is paired with a concrete next step grounded in extending an existing, cited technique, not a general call for future work.

0.21

Power-Performance Characterization of TinyML Systems

cs.LG cs.AI ·2026-08-21 ·Yujie Zhang, Dhananjaya Wijerathne, Zhaoying Li, Tulika Mitra
publishedhighly cited similarity 0.58
Abstract · 7 pages, 9 figures. Published in Proceedings of the IEEE International Conference on Computer Design (ICCD), 2022

TinyML systems are enabling machine learning (ML) inference at the edge. However, there is little quantitative analysis of such systems. This paper presents a systematic performance and power characterization of diverse TinyML applications on microcontrollers (MCUs), spanning neural network models, software libraries, operating systems, and hardware architectures. We focus on the impact of the multiple layers of abstraction that provide higher programmability at the expense of performance and energy efficiency. We propose a model to estimate the costs of different abstraction layers and make recommendations for minimizing those costs. Our findings can help designers with Neural Architecture Search (NAS) and CNN inference optimization on edge devices.

0.54

Vision-centric generative AI models: A software-hardware perspective

cs.CV cs.AR ·2026-08-27 ·Eleni Tselepi, Cristian Sestito, Shady Agwa, Themis Prodromakis
position similarity 0.58
Abstract

Vision generative artificial intelligence (AI) has emerged as one of the most rapidly advancing areas of deep learning. The explosion of multimodal models has made them widely associated with text-to-image applications running on large datacentres. However, vision generative models are equally needed in applications that operate under strict hardware constraints at the edge, including autonomous vehicles, agricultural sensors, and mobile devices. In this Perspective, we argue that progress in vision generative AI has been driven by output quality, with hardware evolving reactively to accommodate growing model demands. We quantify the parameter cost and energy efficiency of these models across a range of accelerator platforms, and map four generative model families against seven real-world application domains. Finally, we advocate a software-hardware co-design approach, where deployment constraints are considered from the start of the design process, ensuring that the "right model" runs on the "right hardware" to serve the "right application", making generative AI deployment sustainable and accessible across a much broader range of platforms.

0.22