CS Paper Radar

Sustainable Edge Vision via Empirically Calibrated DVFS: Eliminating Thermal Throttling on Passively Cooled Hardware

Aayush Marasini, Zhaoxian Zhou

cs.AR cs.CVcs.LG ·submitted 2026-09-04 04:24 UTC · v1
code/data

Abstract

Passive cooling eliminates the energy overhead and mechanical failure modes of fans, making it attractive for edge deployment, yet sustained Deep Neural Network (DNN) inference on passively cooled edge Systems-on-Chip (SoCs) is bottlenecked by thermal throttling. To address this, we propose an empirically calibrated, state-aware Dynamic Voltage and Frequency Scaling (DVFS) scheduler. Unlike heuristic-driven controllers, our methodology utilizes time-domain guards and absolute temperature bounds, with derivative triggers acting as safeguards against sharp thermal spikes. Evaluated on a passively cooled Raspberry Pi 5 running YOLOv8n, our scheduler eliminates all observed thermal throttling events during sustained 30-minute workloads. It outperforms a temperature-only reactive baseline by achieving a 6.8% higher frame rate (Cohen's d = 8.73) while consuming 1.9% less energy per frame. Furthermore, our optimized passive scheduling surpasses an actively cooled reference system in energy efficiency (Joules/frame), though active cooling remains superior for raw throughput. Through isolated ablations, we show that the dwell guard is necessary for run-to-run reproducibility. Finally, exploratory boundary probes indicate that the passive operating envelope closes at ambient temperatures ($\ge 27^\circ$C) where nonlinear leakage defeats DVFS-based control. These results indicate that, within the mapped envelope, correct scheduling can make mechanical cooling unnecessary for sustained edge inference on this platform.

Comment
7 pages, 5 figures, 8 tables, Code, datasets, and frozen artifacts available at: https://github.com/Aayush-Marasini/sustained-edge-vision

Closest papers

Nearest neighbours by meaning across the whole index.

ThermE: Predictive Management of Shared Thermal Headroom for Sustained LLM Inference on Thermally Constrained Edge SoCs

eess.SY ·2026-09-24 ·Rui Lu, Yuheng Wang, Bozheng Liu
similarity 0.70
Abstract · 13 pages, 16 figures

Compact edge system-on-chip (SoC) platforms increasingly run sustained LLM inference under thermal constraints, while their CPU, GPU, and RAM share a cooling path. Prefill and decode therefore consume shared, time-varying thermal headroom, yet vendor governors react only near hardware throttling thresholds without knowledge of request state or upcoming work. A control decision that improves current performance can thus consume headroom too quickly and degrade subsequent service. In this paper, we present ThermE, a runtime system that predicts and jointly manages shared thermal headroom for sustained LLM inference on edge SoCs. Its Fast LLM-to-Heat Compiler maps the model, requests, runtime state, and candidate actions to domain heats without executing LLMs. A partial differential equation (PDE)-constrained Headroom Predictor uses ThermPINN for offline thermal identification and a Reduced Headroom Predictor (RHP) for low-overhead online uncertainty-calibrated headroom forecasts. An Uncertainty-Aware Action Scheduler then selects actions that balance serving quality and future headroom. We implement ThermE atop vLLM and evaluate it across four LLM inference workloads. The results show that ThermE reduces TTFT and TPOT by 40.55% and 12.17%, respectively, relative to vLLM. It achieves a 5.70% SLO violation rate, compared with 12.30% for the strongest baseline, while its predictor obtains a 1.94 $^\circ$C MAE with 11.50 ms overhead.

0.09

Thermal-Headroom Routing for Efficient Robot Perception in Extreme Heat

cs.RO cs.CVcs.PF ·2026-10-26 ·Sparsh Roy, Kevin Zhou, Arhaan Shah, Shreyan Garg, Vihaan Joshi-Apte +2 more
code/data similarity 0.68
Abstract · 9 pages, 5 figures, 11 tables. Code and experimental outputs: https://github.com/ImSpxrsh/thermal-headroom-routing {Submitted IEEE Big Data}

Adaptive robot perception systems must balance detector accuracy, inference latency, and energy consumption, particularly when high ambient temperatures cause processors to thermally throttle. We propose Thermal-Headroom Routing (THR), a lightweight model-selection policy that forecasts processor temperature using a closed-form RC thermal model and excludes detector configurations predicted to cross a throttling threshold. We evaluate THR with four YOLO11 configurations across seven real-world perception traces, eight ambient temperatures, and 20 randomized seeds, comparing it with latency-aware routing, fixed-threshold thermostats, duty caps, and a matched-compute-budget control. At ambient temperatures of 45-55 degrees C and a tight inference deadline, THR eliminates throttling in simulation, reduces deadline misses by 3.9-7.5 percentage points, and reduces energy per on-time frame by approximately 12-13% relative to a latency-belief router. A separate experiment using deadline-paced, nonoverlapping frame execution yields miss-rate reductions of 6.2-9.5 percentage points. A tuned thermostat or duty cap can match THR at a fixed operating point; predictive routing is most useful when ambient conditions or calibrated thermal parameters differ from those used to tune static policies. Measurements on an Apple M5 support the single-node heating approximation but do not validate hardware throttling. The results characterize the conditions under which thermal forecasting improves the efficiency and timeliness of resource-constrained robot perception.

0.46

HeatCache: Thermal-aware Energy-efficient LLM Inference Scheduling for Chassis-level Liquid Cooling in Sustainable Edge Server Rooms

cs.DC cs.PFeess.SY ·2026-09-11 ·Rui Lu, Huanghuang Liang, Kaiqi Guan, Dan Wang
similarity 0.68
Abstract

LLM inference is increasingly deployed at institution-scale edges to meet service requirements. However, multi-GPU inference consumes a large amount of electricity and produces substantial heat. To improve sustainability, operators and regulations often demand raising the ambient setpoint to reduce cooling electricity. This can increase thermal throttling and hardware aging, leading to Service-Level Objective violations. In this paper, we present HeatCache, a thermal-aware, energy-efficient LLM inference scheduler for commercial chassis-level AIO liquid-cooled GPUs at sustainable ambient temperatures. HeatCache treats AIO loops as a temporary heat buffer, measured by heat budget and schedules requests to minimize energy subject to thermal safety and SLO constraints, based on an electrical-informed heat-demand estimation from HeatiTS. We implement HeatCache atop vLLM and show that it reduces computing energy by up to 18.0%, decreases thermal-throttle exposure by 81.7%, and maintains SLO violation rates below 0.9% even up to $48~^{\circ}\mathrm{C}$.

0.11

PELM: Power Efficient On-Device LLM Inference with Speculative Decoding and Dynamic Voltage Frequency Scaling

cs.LG cs.CLcs.OScs.PF ·2026-09-09 ·Weisi Yang, Stephen Xia
publishedcode/datahighly cited similarity 0.66
Abstract · Accepted to ACM/IEEE SenSys'26

Deploying Large Language Models (LLMs) directly on mobile platforms at the edge is gaining traction due to a myriad of benefits, such as increased privacy, personalization, and reduced latency. However, LLMs have heavy computational requirements, which are difficult for resource-constrained mobile and edge platforms to fulfill. In addition to limited compute resources, mobile and edge systems often have a compact form factor and lack physical mechanisms to dissipate heat generated from high processor usage rates (e.g., fans) to prevent throttling and reduced processing power, which LLMs can easily cause. To mitigate these effects, prior works have proposed various power governing strategies, such as dynamic voltage and frequency scaling (DVFS), for reducing power and heat generation for heavy computational tasks on mobile platforms. Recently, DVFS methods tailored for mobile LLMs have also been proposed. However, these methods mostly focus on optimizing hardware parameters and processor frequencies, and they fall short under some thermally constrained scenarios. Drawing from recent advances in machine learning, we identify and take advantage of the key insight that not all tokens require full-depth inference to maintain high-quality generation. Motivated by this, we present PELM, a solution that augments traditional DVFS processor frequency tuning with two additional workload-specific knobs: 1) speculative decoding and 2) variable verification depth to expand the optimization space to multiple dimensions for more power efficient on-device LLM inference. In extensive evaluations across hardware platforms and datasets, PELM demonstrates superior performance compared to state-of-the-art power governing methods, with up to 23.1% speedup and 52.4% reduction in energy consumption, while maintaining comparable task performance. The source code is available at https://github.com/imec-nu/PELM.

0.64

Elastoformer: Enabling Dynamic Adaptivity via Elastic Model Transformation

cs.CV cs.AIcs.PFeess.SY ·2026-09-09 ·Sudaksh Kalra, Dolly Sapra
publishedcode/data similarity 0.65
Abstract · Published at SEC'25

EdgeAI systems are increasingly employing computer vision applications to enable intelligent, on-device decision-making in real-time. However, these deployments face highly dynamic operational conditions, with fluctuating constraints on latency, power availability, and memory resources. Deep Neural Networks (DNN), which follow fixed computational execution flows, lack the flexibility to adapt to such variability, resulting in inefficient and suboptimal performance in edge scenarios. This underscores the need for architectures that are not only efficient but also dynamically scalable at runtime. In this paper, we propose Elastoformer: A framework that transforms conventional neural networks (NN) into Elastic NN capable of real-time elastic inference. Unlike the conventional bag-of-models approach, which requires maintaining multiple independent models for different operating conditions, Elastoformer offers a single, modular solution that dynamically switches between multiple modes of operation at runtime, adapting efficiently to the changing computational budgets of edge devices without the overhead of managing separate models. Experiments reveal that our framework achieves up to 85% reduction in computation FLOPs, 50% reduction in latency and 76% reduction in memory overhead, while showcasing the architecture agnostic nature of the framework across both Vision Transformers and CNNs. Our code is available at https://github.com/sudaksh14/Elastoformer.

0.71

ETCInfer: An Energy-efficient Thermal-aware Cooling-joint Scheduler for LLM Inference in AI Datacenters

cs.DC cs.PFeess.SY ·2026-09-14 ·Rui Lu, Rui Ge, Huanghuang Liang, Xiaobo Zhou, Dan Wang
similarity 0.64
Abstract · 16 pages

Large language model (LLM) inference in AI datacenters creates a coupled control problem between GPU serving and facility cooling. Raising ambient temperature setpoints can reduce cooling energy and carbon, but also shrinks thermal headroom, induces GPU throttling, and leads to Service-Level-Objective (SLO) violations. In this paper, we study joint cooling--computing control for LLM inference: minimizing per-job GPU-plus-cooling energy while satisfying thermal safety and latency SLO constraints. We present ETCInfer, an energy-efficient, thermal-aware scheduler that selects a pre-job Computer Room Air Conditioner (CRAC) setpoint and adapts per-GPU frequency and micro-batch size during execution. ETCInfer builds compact physics-informed control models by calibrating GPU heat generation, chassis heat dissipation, CRAC power, and prefill/decode latency relations from telemetry. These models estimate hidden thermal states and time-to-throttle, enabling the scheduler to evaluate energy, temperature, and latency before applying an action. We formulate this joint setpoint--frequency--micro-batch control problem as a partially observable Markov decision process and design ETCAdapter, a learning-based controller that minimizes per-job energy under thermal safety and SLO constraints. We implement ETCInfer as a coordination layer over typical inference and cluster management stacks. Evaluation across real-trace simulation and validation experiments shows that ETCInfer reduces total job energy by up to 33.1%, thermal throttle exposure by up to 92.9%, and keeps SLO violation rates below 0.7% even at ambient temperatures up to $48^{\circ}\mathrm{C}$.

0.17

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

cs.LG ·2026-09-14 ·Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning
published similarity 0.64
Abstract · Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

0.42

LiteEvent-AE: Lightweight Autoencoder for Event-Based Vision on Low-Latency Energy-Constrained Edge Devices

cs.CV cs.AIeess.IV ·2026-08-22 ·Riadul Islam, Joey Mule, Dhandeep Challagundla, Shahmir Rizvi, Sean Carson +1 more
similarity 0.62
Abstract

Event-based vision has emerged as a promising paradigm for energy-aware artificial intelligence (AI), offering sparse, low-latency visual signals that reduce redundant data processing and support sustainable edge computing. However, the asynchronous and noise-prone nature of event streams creates challenges for conventional deep learning models, which are often too computationally intensive for low-power embedded platforms. This work presents a compact and configurable event-driven autoencoder that efficiently compresses neuromorphic data while preserving essential spatiotemporal structure for downstream inference. The architecture integrates lightweight convolutional encoding with robust performance under adaptive event thresholding and a minimal classifier head, enabling substantial reductions in computational cost without degrading recognition fidelity. Extensive evaluations on the Smart Event Face Dataset (SEFD) and Event-Based Crossing Dataset (EBCD) show that the proposed framework achieves competitive or superior accuracy compared to YOLOv9 while requiring up to 35.6$\times$ fewer parameters. To assess real-world sustainability, the model is deployed on resource-constrained hardware: a Raspberry Pi 4B and a NVIDIA Jetson Nano. On NVIDIA Jetson Nano, it delivers real-time throughput of 44.8 FPS. On a Raspberry Pi 4B CPU, the 50\% autoencoder classifier consumes 16.19 J for the evaluated inference workload, corresponding to approximately 726.3$\times$ lower energy consumption than YOLOv9 under the same evaluation protocol. These results demonstrate the potential of compact event-driven models to advance environmentally conscious, low-power AI systems for high-speed perception in autonomous, mobile, and embedded computing environments.

0.24