CS Paper Radar

ThermE: Predictive Management of Shared Thermal Headroom for Sustained LLM Inference on Thermally Constrained Edge SoCs

Rui Lu, Yuheng Wang, Bozheng Liu

eess.SY ·submitted 2026-09-24 10:37 UTC · v1

Abstract

Compact edge system-on-chip (SoC) platforms increasingly run sustained LLM inference under thermal constraints, while their CPU, GPU, and RAM share a cooling path. Prefill and decode therefore consume shared, time-varying thermal headroom, yet vendor governors react only near hardware throttling thresholds without knowledge of request state or upcoming work. A control decision that improves current performance can thus consume headroom too quickly and degrade subsequent service. In this paper, we present ThermE, a runtime system that predicts and jointly manages shared thermal headroom for sustained LLM inference on edge SoCs. Its Fast LLM-to-Heat Compiler maps the model, requests, runtime state, and candidate actions to domain heats without executing LLMs. A partial differential equation (PDE)-constrained Headroom Predictor uses ThermPINN for offline thermal identification and a Reduced Headroom Predictor (RHP) for low-overhead online uncertainty-calibrated headroom forecasts. An Uncertainty-Aware Action Scheduler then selects actions that balance serving quality and future headroom. We implement ThermE atop vLLM and evaluate it across four LLM inference workloads. The results show that ThermE reduces TTFT and TPOT by 40.55% and 12.17%, respectively, relative to vLLM. It achieves a 5.70% SLO violation rate, compared with 12.30% for the strongest baseline, while its predictor obtains a 1.94 $^\circ$C MAE with 11.50 ms overhead.

Comment
13 pages, 16 figures

Closest papers

Nearest neighbours by meaning across the whole index.

HeatCache: Thermal-aware Energy-efficient LLM Inference Scheduling for Chassis-level Liquid Cooling in Sustainable Edge Server Rooms

cs.DC cs.PFeess.SY ·2026-09-11 ·Rui Lu, Huanghuang Liang, Kaiqi Guan, Dan Wang
similarity 0.77
Abstract

LLM inference is increasingly deployed at institution-scale edges to meet service requirements. However, multi-GPU inference consumes a large amount of electricity and produces substantial heat. To improve sustainability, operators and regulations often demand raising the ambient setpoint to reduce cooling electricity. This can increase thermal throttling and hardware aging, leading to Service-Level Objective violations. In this paper, we present HeatCache, a thermal-aware, energy-efficient LLM inference scheduler for commercial chassis-level AIO liquid-cooled GPUs at sustainable ambient temperatures. HeatCache treats AIO loops as a temporary heat buffer, measured by heat budget and schedules requests to minimize energy subject to thermal safety and SLO constraints, based on an electrical-informed heat-demand estimation from HeatiTS. We implement HeatCache atop vLLM and show that it reduces computing energy by up to 18.0%, decreases thermal-throttle exposure by 81.7%, and maintains SLO violation rates below 0.9% even up to $48~^{\circ}\mathrm{C}$.

0.11

ETCInfer: An Energy-efficient Thermal-aware Cooling-joint Scheduler for LLM Inference in AI Datacenters

cs.DC cs.PFeess.SY ·2026-09-14 ·Rui Lu, Rui Ge, Huanghuang Liang, Xiaobo Zhou, Dan Wang
similarity 0.74
Abstract · 16 pages

Large language model (LLM) inference in AI datacenters creates a coupled control problem between GPU serving and facility cooling. Raising ambient temperature setpoints can reduce cooling energy and carbon, but also shrinks thermal headroom, induces GPU throttling, and leads to Service-Level-Objective (SLO) violations. In this paper, we study joint cooling--computing control for LLM inference: minimizing per-job GPU-plus-cooling energy while satisfying thermal safety and latency SLO constraints. We present ETCInfer, an energy-efficient, thermal-aware scheduler that selects a pre-job Computer Room Air Conditioner (CRAC) setpoint and adapts per-GPU frequency and micro-batch size during execution. ETCInfer builds compact physics-informed control models by calibrating GPU heat generation, chassis heat dissipation, CRAC power, and prefill/decode latency relations from telemetry. These models estimate hidden thermal states and time-to-throttle, enabling the scheduler to evaluate energy, temperature, and latency before applying an action. We formulate this joint setpoint--frequency--micro-batch control problem as a partially observable Markov decision process and design ETCAdapter, a learning-based controller that minimizes per-job energy under thermal safety and SLO constraints. We implement ETCInfer as a coordination layer over typical inference and cluster management stacks. Evaluation across real-trace simulation and validation experiments shows that ETCInfer reduces total job energy by up to 33.1%, thermal throttle exposure by up to 92.9%, and keeps SLO violation rates below 0.7% even at ambient temperatures up to $48^{\circ}\mathrm{C}$.

0.17

Sustainable Edge Vision via Empirically Calibrated DVFS: Eliminating Thermal Throttling on Passively Cooled Hardware

cs.AR cs.CVcs.LG ·2026-09-04 ·Aayush Marasini, Zhaoxian Zhou
code/data similarity 0.70
Abstract · 7 pages, 5 figures, 8 tables, Code, datasets, and frozen artifacts available at: https://github.com/Aayush-Marasini/sustained-edge-vision

Passive cooling eliminates the energy overhead and mechanical failure modes of fans, making it attractive for edge deployment, yet sustained Deep Neural Network (DNN) inference on passively cooled edge Systems-on-Chip (SoCs) is bottlenecked by thermal throttling. To address this, we propose an empirically calibrated, state-aware Dynamic Voltage and Frequency Scaling (DVFS) scheduler. Unlike heuristic-driven controllers, our methodology utilizes time-domain guards and absolute temperature bounds, with derivative triggers acting as safeguards against sharp thermal spikes. Evaluated on a passively cooled Raspberry Pi 5 running YOLOv8n, our scheduler eliminates all observed thermal throttling events during sustained 30-minute workloads. It outperforms a temperature-only reactive baseline by achieving a 6.8% higher frame rate (Cohen's d = 8.73) while consuming 1.9% less energy per frame. Furthermore, our optimized passive scheduling surpasses an actively cooled reference system in energy efficiency (Joules/frame), though active cooling remains superior for raw throughput. Through isolated ablations, we show that the dwell guard is necessary for run-to-run reproducibility. Finally, exploratory boundary probes indicate that the passive operating envelope closes at ambient temperatures ($\ge 27^\circ$C) where nonlinear leakage defeats DVFS-based control. These results indicate that, within the mapped envelope, correct scheduling can make mechanical cooling unnecessary for sustained edge inference on this platform.

0.37

AI-driven Thermal-aware Data Center Capacity Planning

cs.LG ·2026-10-01 ·Yixing Li, Mark Fenton, Matthew Kaufeler, Ka Ming Leung, Xin Ai +1 more
published similarity 0.68
Abstract · Presented at DesignCon 2026

The emerging of large language models (LLMs) has posed significant challenges to the thermal management of data center. Intense GPU computation for LLMs results in localized hotspots. Moreover, spiking thermal loads during training and inference bursts make real-time cooling response more difficult to predict and control. Thermal-aware capacity planning of data center requires massive expensive high-fidelity CFD simulations. AI models can perform real-time prediction for unseen designs. However, existing works either have large prediction error, or have over-simplified assumptions for data center operations. This work presents an AI-driven framework that can perform thermal-aware capacity planning for a real-world data center in seconds. The embedded AI model learns from numerous key parameters (rack power, server power, server placement, HVAC settings etc.), and provides temperature prediction within milliseconds. This AI model is tested against high-fidelity CFD simulations, and results show that for unseen data center designs, model can achieve high accuracy with 10000X speedup. Driven by the AI model, the authors design the thermal-aware capacity planning framework. This framework can help data center designers and operators instantaneously optimize both workload distribution and HVAC cooling efficiency.

0.13

Thermal-Headroom Routing for Efficient Robot Perception in Extreme Heat

cs.RO cs.CVcs.PF ·2026-10-26 ·Sparsh Roy, Kevin Zhou, Arhaan Shah, Shreyan Garg, Vihaan Joshi-Apte +2 more
code/data similarity 0.67
Abstract · 9 pages, 5 figures, 11 tables. Code and experimental outputs: https://github.com/ImSpxrsh/thermal-headroom-routing {Submitted IEEE Big Data}

Adaptive robot perception systems must balance detector accuracy, inference latency, and energy consumption, particularly when high ambient temperatures cause processors to thermally throttle. We propose Thermal-Headroom Routing (THR), a lightweight model-selection policy that forecasts processor temperature using a closed-form RC thermal model and excludes detector configurations predicted to cross a throttling threshold. We evaluate THR with four YOLO11 configurations across seven real-world perception traces, eight ambient temperatures, and 20 randomized seeds, comparing it with latency-aware routing, fixed-threshold thermostats, duty caps, and a matched-compute-budget control. At ambient temperatures of 45-55 degrees C and a tight inference deadline, THR eliminates throttling in simulation, reduces deadline misses by 3.9-7.5 percentage points, and reduces energy per on-time frame by approximately 12-13% relative to a latency-belief router. A separate experiment using deadline-paced, nonoverlapping frame execution yields miss-rate reductions of 6.2-9.5 percentage points. A tuned thermostat or duty cap can match THR at a fixed operating point; predictive routing is most useful when ambient conditions or calibrated thermal parameters differ from those used to tune static policies. Measurements on an Apple M5 support the single-node heating approximation but do not validate hardware throttling. The results characterize the conditions under which thermal forecasting improves the efficiency and timeliness of resource-constrained robot perception.

0.46

Hydra: Phase-Aware Workload Characterization of LLM Inference across Edge SoC Generations, Backends, and Quantization Levels

cs.AR cs.AIcs.DCcs.PF ·2026-08-25 ·Amir Taherin, Sana Taghipour Anvari, Charles Amante, Yixiao Chen, Ruben Noroian +7 more
publishedcode/data similarity 0.67
Abstract · Accepted at the IEEE International Symposium on Workload Characterization (IISWC 2026)

Edge LLM deployment is shaped by more than model size and precision: inference backend, hardware platform, memory traffic, and power management all affect latency and efficiency. We present Hydra, a common-schema, phase-aware workload characterization framework for LLM inference on edge SoCs. Hydra instruments HuggingFace Transformers and llama.cpp with a shared per-prompt timing schema and fuses those records with hardware telemetry, enabling a multi-dimensional characterization of performance, system-resource utilization, and efficiency across prefill and decode phases. Using Hydra, we evaluate three consecutive edge System-on-Chip (SoC) generations (AGX Xavier, AGX Orin, and AGX Thor), 13 instruction-tuned LLMs from seven families, five execution formats, and consider input/output-length sensitivity. The resulting artifact contains roughly 107K per-prompt records and is publicly released with Hydra. Our analysis shows that aggregate latency alone hides key deployment effects: backend structure changes where latency is introduced, quantization reduces memory traffic and energy but does not predict power monotonically, and SoC generation changes how utilization and efficiency should be interpreted. By connecting phase-level timing with system-resource utilization and efficiency metrics, Hydra enables reproducible, phase-aware characterization of edge LLM inference. Hydra's source code and the collected per-prompt trace corpus are available open-source at: https://github.com/amirtaherin/hydra

0.66

A Measurement Study of LLM Inference Trade-offs Across Edge Continuum Hardware

cs.DC cs.AIcs.LG ·2026-09-08 ·Maysam Khatib, Moysis Symeonides, Demetris Trihinas, George Pallis, Marios D. Dikaiakos
published similarity 0.66
Abstract · Accepted for publication at WIMS 2026

Large language models (LLMs) are increasingly used as backends for intelligent web services, but serving them across the edge continuum requires balancing quality, latency, model footprint, and energy. This paper presents a controlled measurement study of self-hosted LLM inference across edge and near-edge deployment nodes: an NVIDIA Jetson AGX Orin and a near-edge server with CPU-only and GPU-enabled inference modes. We evaluate multiple open-weight LLMs and quantization variants using a fixed question-answering workload, and compare them against GPT-4o as a cloud-hosted accuracy and latency reference. Our benchmarking pipeline reports accuracy, model footprint, per-token decoding latency, prefill latency, and overall execution energy. The results show that GPU-enabled server execution provides the lowest compute-side latency, while Jetson Orin shows lower measured energy, consistent with its lower platform power under our setup. CPU-only execution is consistently dominated in latency for our workload and shows higher measured energy. We also show that parameter count and downloaded weight-file size alone do not reliably predict observed accuracy or latency. Finally, using Pareto-frontier analysis, we study how deployment decisions may change under possible streamed-token delivery overheads, highlighting that compute-side inference metrics alone can lead to suboptimal placement for latency-sensitive interactive web services.

0.26

PELM: Power Efficient On-Device LLM Inference with Speculative Decoding and Dynamic Voltage Frequency Scaling

cs.LG cs.CLcs.OScs.PF ·2026-09-09 ·Weisi Yang, Stephen Xia
publishedcode/datahighly cited similarity 0.65
Abstract · Accepted to ACM/IEEE SenSys'26

Deploying Large Language Models (LLMs) directly on mobile platforms at the edge is gaining traction due to a myriad of benefits, such as increased privacy, personalization, and reduced latency. However, LLMs have heavy computational requirements, which are difficult for resource-constrained mobile and edge platforms to fulfill. In addition to limited compute resources, mobile and edge systems often have a compact form factor and lack physical mechanisms to dissipate heat generated from high processor usage rates (e.g., fans) to prevent throttling and reduced processing power, which LLMs can easily cause. To mitigate these effects, prior works have proposed various power governing strategies, such as dynamic voltage and frequency scaling (DVFS), for reducing power and heat generation for heavy computational tasks on mobile platforms. Recently, DVFS methods tailored for mobile LLMs have also been proposed. However, these methods mostly focus on optimizing hardware parameters and processor frequencies, and they fall short under some thermally constrained scenarios. Drawing from recent advances in machine learning, we identify and take advantage of the key insight that not all tokens require full-depth inference to maintain high-quality generation. Motivated by this, we present PELM, a solution that augments traditional DVFS processor frequency tuning with two additional workload-specific knobs: 1) speculative decoding and 2) variable verification depth to expand the optimization space to multiple dimensions for more power efficient on-device LLM inference. In extensive evaluations across hardware platforms and datasets, PELM demonstrates superior performance compared to state-of-the-art power governing methods, with up to 23.1% speedup and 52.4% reduction in energy consumption, while maintaining comparable task performance. The source code is available at https://github.com/imec-nu/PELM.

0.64