CS Paper Radar

Reinforcement Learning-Based Laser Cutting Machine Parameter Optimization

Khanh Quan Pham, Majid Kundroo, Geunwoo Ban, Seongho Bae, Taehong Kim

cs.AI ·submitted 2026-08-11 06:39 UTC · v1
publishedhighly cited

Abstract

Achieving high accuracy in laser-based cutting of optical films requires careful tuning of parameters such as focal length and laser power beam, adjusted according to the specific properties of each film type. Trial-and-error based traditional methods are used to find the most suitable cutting parameters for various films, but they are slow and inaccurate. To address this issue, this paper presents the Reinforcement Learning for Laser Cutting (RL$^{2}$C) algorithm, which uses Q-learning with an epsilon-greedy policy to dynamically optimize cutting parameters, significantly reducing taper size and film wastage. Additionally, RL$^{2}$C incorporates a dynamic environment space adaptability mechanism to allow it to adapt to new states encountered during the learning process over multiple batches of experiments. Experimental results demonstrate that RL$^{2}$C requires fewer steps and less time to find optimal cutting parameters compared to various RL-based optimization methods. Specifically, RL$^{2}$C reduces the number of optimization steps by up to 12.5\% and processing time by up to 81.8\% compared to existing methods. This study demonstrates the potential of RL in industrial laser-cutting processes by improving cut quality, reducing time and film wastage, and minimizing manual interventions.

Comment
21 pages, 8 figures. Accepted manuscript published in Journal of Intelligent Manufacturing (2025). DOI: 10.1007/s10845-025-02619-z
Journal ref
Journal of Intelligent Manufacturing 37 (2025) 1813-1828

Closest papers

Nearest neighbours by meaning across the whole index.

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

eess.SY ·2026-09-23 ·Lauren Bogo, Adam Clare, Dominic Liao-McPherson
published similarity 0.58
Abstract · 7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

0.37

Reinforcement Learning-Based Production Scheduling in an Industry-Based Coating Scenario Using the Digital Model Playground

cs.AI ·2026-08-14 ·Arne Kröger, Ralf Buschermöhle, Wilhelm Hasselbring, Henrik Wilbers
publishedbenchmarkcode/data similarity 0.57
Abstract · Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or…

Production scheduling in complex manufacturing environments is challenging when sequence-dependent setup times, stochastic disturbances, and due-date constraints must be addressed simultaneously. While reinforcement learning (RL) methods have shown promising results in research, most studies rely on simplified benchmark processes, limiting their industrial relevance. This paper demonstrates the applicability of RL-based scheduling in an industry-inspired coating process that reflects practical complexities such as sequence-dependent setup times, machine breakdowns, and variable utilization. The open-source Digital Model Playground (DMPG), a discrete event simulation framework, is used to model the scenario and to train RL agents. Two standard algorithms, Deep Q-Networks and Proximal Policy Optimization, are benchmarked against conventional dispatching rules to illustrate feasibility and to provide a transparent testbed for further research. Results indicate that RL-based scheduling achieves balanced improvements across key performance indicators, with PPO delivering the most robust performance. The main contribution of this work is to bridge the gap between academic research and industrial practice by validating RL-based scheduling in a realistic, shareable scenario and by providing a reusable open-source framework for future studies.

0.38

MOON-RL: Multi-Objective Optimization via Objective Space Navigation with Reinforcement Learning

cs.LG ·2026-11-11 ·Andrii Artomov, Soheyl Massoudi, Jürg Schiffmann
similarity 0.55
Abstract · 66 pages, including appendices. Code, data and supplementary video links are provided in the manuscript

Many engineering design problems involve multiple conflicting objectives and strict feasibility constraints. They are typically solved with population-based optimizers that require many evaluations and offer limited online control over where the search is focused. We present MOON-RL, a reinforcement-learning-based optimization framework that formulates constrained multi-objective search as preference-directed navigation in the objective space. In MOON-RL, a lightweight PPO policy receives objective-space and constraint-related observations and acts as an instance-specific adaptive search process. It learns how to update the design so that the current solution advances along a user-specified trade-off direction, while a simple meta-algorithm periodically resets the policy, resamples starting designs from a continuously updated archive of non-dominated solutions, and adjusts step-size and penalty schedules. We evaluate MOON-RL on real-world actuator-design problems and additional convergence-hard constrained benchmarks, comparing against established evolutionary algorithms under matched evaluation budgets. In focused search scenarios, MOON-RL achieves competitive performance in the region of interest, and ablation studies show that both the RL-driven adaptive sampling process and the meta-algorithm contribute to this behaviour, suggesting that repurposing RL training as objective-space navigation is a viable building block for interactive, preference-guided design tools. Additional experiments show that the framework also accommodates adaptive non-RL samplers, while PPO remains a strong choice for fixed-target, preference-directed objective-space navigation.

0.26

Harnessing human expertise for high-precision robotic assembly in industrialized construction: A sample-efficient installer-in-the-loop interactive reinforcement learning framework

cs.RO stat.ML ·2026-09-02 ·Zekai Jin, Huiguang Wang, Xiaoning Sun, Yi Shao
published similarity 0.52
Abstract · 22 pages, 11 figures, 10 tables. Published in Advanced Engineering Informatics

Industrialized construction imposes stringent precision requirements on robotic assembly of modular components such as prefabricated window units. In tolerance-critical operations, the central bottleneck is not only mechanical clearance but also converting tacit installer expertise into data-efficient autonomy under sparse acceptance feedback, contact variability, and millimeter-scale constraints. We present an installer-in-the-loop interactive reinforcement learning framework that acquires expertise through offline teleoperated demonstrations, sparse event-driven binary takeovers at contact-failure boundaries, and acceptance-aligned terminal rewards, logged under a unified schema for traceable offline-to-online adaptation. A temporally abstract action-sequence policy built on Q-chunking with Flow Q-Learning captures multimodal recovery maneuvers under sparse terminal rewards, while a non-updating warm-start phase stabilizes the offline-to-online transition. The framework is evaluated in MuJoCo across the workflow from suction acquisition through clearance-limited seating, under structured staging and end-to-end randomized placement. Within a defined stress-test regime with 2 mm per-side clearance, bounded pose perturbations, and friction randomization, the pipeline attains 100\% autonomous seating with 12--15 min of cumulative installer supervision over 3.0 h of online training, and reaches the 95\% success milestone in approximately 0.5 h and 1.5 h in the two experiments. We also report wall-clock adaptation time, cumulative takeover minutes, intervention-rate decay, and stage-wise failure attribution to inform supervision budgeting. Ablations isolate the complementary contributions of temporal abstraction, installer intervention, and warm-start value calibration.

0.35

A Universal Policy Wrapper With Guarantees

cs.LG eess.SYmath.DS ·2026-11-02 ·Georgiy Malaniya, Anton Bolychev, Pavel Osinenko
published similarity 0.52
Abstract · Accepted for IEEE Access (2026)

Many control tasks require driving the system into a prescribed goal set and subsequently keeping it there. The considered setting assumes that a working controller is available that provably reaches and maintains the goal, albeit with suboptimal performance. This controller is referred to as the fallback policy. Conversely, although state-of-the-art reinforcement-learning (RL) algorithms can discover policies with impressive empirical performance, the neural networks at their core act as opaque black boxes learned through data-driven exploration and, as such, provide no theoretical mechanism to guarantee that the system will ever reach---and stay within---the prescribed goal set. This article presents CALF-Wrapper, a method that combines the fallback policy with a pretrained RL base policy and uses the critic estimate associated with the base policy to select between them during deployment. The theoretical analysis establishes that CALF-Wrapper inherits the goal-reaching property of the fallback policy under the stated assumptions and provides probability bounds for the settling time and the maximum distance from the goal set over a prescribed time interval. The experimental study evaluates CALF-Wrapper in four simulated control environments of different complexity. Comparisons include the base policy, fallback policy, and constrained reinforcement-learning methods formulated for the same objective. Sensitivity and ablation studies provide direct hyperparameter recommendations. The experiments show how CALF-Wrapper can provide effective task performance while attaining the maximum possible observed goal-reaching rate. CALF-Wrapper requires no additional dynamics model, online learning, or constrained optimization during execution.

0.35

Two-Timescale Reinforcement Learning for Real-Time Optimization and Economic NMPC: Experimental Validation

eess.SY ·2026-09-28 ·Saket Adhau, Jose Matias, Sebastien Gros, Sigurd Skogestad
similarity 0.51
Abstract · 12 pages, submitted to Journal of Process Control

We propose a reinforcement learning (RL) framework that tunes both Real-Time Optimization (RTO) and Economic Nonlinear Model Predictive Control (ENMPC) to address plant--model mismatch in process systems. Drawing on modifier-adaptation concepts, the method parameterizes the dynamic model, stage costs, constraints, and RTO modifiers, and uses Q-learning to adjust these parameters at two timescales: a fast update for the ENMPC layer and a slow update for the RTO layer. The framework is experimentally validated on a laboratory rig emulating a three-well subsea oil-production network. Using plant measurement data, the proposed RTO-RLMPC scheme achieves 8.6% higher economic profit than nominal ENMPC, preserves input feasibility of the deployed ENMPC policy and empirically satisfies the path constraints under disturbances and measurement noise, and drives the learned model parameters toward reference plant values, independently identified from experimental data, along the directions that most affect the economic objective. This work provides one of the first experimental demonstrations of RL-tuned ENMPC integrated with RTO.

0.24

Parameter Exploration for RLVR via Variational Learning

cs.LG cs.AIcs.CL ·2026-08-10 ·Vatsal Venkatkrishna, Nico Carlsen Daheim, Iryna Gurevych
top venue similarity 0.51
Abstract · Accepted at the NeurIPS 2026

Exploration has been a focus of reinforcement learning research for a long time. Recently, there has been growing evidence that it is also an important ingredient in LLM reinforcement learning recipes that can significantly impact downstream performance. Many existing methods control exploration in the action-space, for example, using temperature scaling. However, these methods cannot reorder tokens but only influence the variance in the output distribution. This limits exploration and can lead to divergence or stalled training. Here, we investigate parameter-space exploration, where rollouts are generated by sampling different policies from a posterior that may each explore different rollouts. Sampling less or more diverse policies is then a complementary control lever over exploration. We introduce a family of methods called Perturbed Parameter Policy Optimization (3PO) which use different sampling strategies and different rollout grouping for reward estimation. Experiments on Olmo-3-1025-7B and Qwen2.5-Math-7B across mathematical reasoning and code generation tasks show that these approaches can improve the average downstream performance over standard GRPO at a near-identical FLOPs cost. Moreover, using multiple parameter samples generally produces fewer zero-advantage groups and malformed or incorrect rollouts during training than GRPO and action-space baselines. Overall, our work presents evidence that parameter-space exploration can improve reinforcement learning for LLMs.

0.61

Distributed Optimization of Modular Production Systems using Model-based Reinforcement Learning with Inverse Models

cs.AI cs.LGeess.SY ·2026-09-10 ·Andreas Schwung, Steve Yuwono, Sofiene Lassoued, Dorothea Schwung
similarity 0.51
Abstract

This paper presents a novel approach for data-driven self-learning control of highly flexible, modular manufacturing systems. Specifically, we employ a novel framework for model-based reinforcement learning which introduces approximate inverse process models within the training of reinforcement policies. This approach disentangles the learning of actuation dynamics and the dynamics in state space, resulting in RL-based training solely within the task space. We propose a lightweight feedforward architecture for approximate inverse models and integrate them within the policy network of standard RL algorithms. We apply the approach to a laboratory modular production testbed with heterogeneous production modules. The results underline the efficiency improvements for modular manufacturing units in terms of both performance and training speed, particularly for off-policy algorithms.

0.17