CS Paper Radar

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

Lauren Bogo, Adam Clare, Dominic Liao-McPherson

eess.SY ·submitted 2026-09-23 19:22 UTC · v1
published

Abstract

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

Comment
7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)
Journal ref
2026 IEEE Conference on Control Technology and Applications (CCTA), Vancouver, BC, Canada, 2026, pp. 323-329
DOI
10.1109/CCTA62090.2026.11684174

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

cs.AI cs.LG ·2026-11-19 ·Rafid Enayet, Imtiaz Ahmed, Md Habibor Rahman
benchmark similarity 0.65
Abstract

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.

0.32

AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

cs.AI ·2026-11-03 ·Olabode T. Ajenifujah, Amir Barati Farimani
benchmark similarity 0.61
Abstract

Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language model (LLM) agent that gives process engineers natural-language access to CFD-trained surrogates of spatter and melt pool geometry for SS316L through the Model Context Protocol (MCP). Polynomial surrogates trained on 279 single-track simulations predict melt pool dimensions ($R^2 \geq 0.95$) and spatter volume ($R^2 = 0.83$ on test data) at any power-velocity point in the trained range, and geometric criteria assign each point a geometry-derived defect regime (keyhole, lack of fusion, balling or stable) that matches the regime obtained from the simulated geometry in 93.4% of tracks under cross-validation. The agent selects and parameterizes tools for prediction, process-window scans and constrained optimization. Minimum-spatter optima often sat within 10 $μ$m of the lack-of-fusion boundary; a margin-aware optimizer moved them away from all thresholds and raised the estimated probability of remaining classified Good from 0.94 to 1.00 under an assumed 2% process drift, and from 0.72 to 0.91 when jointly sampled cross-validated geometry residuals were added. About 40-50 well-spread simulations sufficed to reproduce the defect map. To evaluate the agent layer, we introduce a 145-prompt benchmark scored against direct tool calls, plus eight prompts (40 runs) on margin-aware requests. Over the 725 runs of the main benchmark the agent passed the intended inputs in 98.5% of parsing prompts, reported the scored spatter values and defect classes faithfully and met every stated constraint in the 65 feasible optimization runs, within a median 1.0% of the brute-force optimum.

0.27

Reinforcement Learning-Based Laser Cutting Machine Parameter Optimization

cs.AI ·2026-08-11 ·Khanh Quan Pham, Majid Kundroo, Geunwoo Ban, Seongho Bae, Taehong Kim
publishedhighly cited similarity 0.58
Abstract · 21 pages, 8 figures. Accepted manuscript published in Journal of Intelligent Manufacturing (2025). DOI: 10.1007/s10845-025-02619-z

Achieving high accuracy in laser-based cutting of optical films requires careful tuning of parameters such as focal length and laser power beam, adjusted according to the specific properties of each film type. Trial-and-error based traditional methods are used to find the most suitable cutting parameters for various films, but they are slow and inaccurate. To address this issue, this paper presents the Reinforcement Learning for Laser Cutting (RL$^{2}$C) algorithm, which uses Q-learning with an epsilon-greedy policy to dynamically optimize cutting parameters, significantly reducing taper size and film wastage. Additionally, RL$^{2}$C incorporates a dynamic environment space adaptability mechanism to allow it to adapt to new states encountered during the learning process over multiple batches of experiments. Experimental results demonstrate that RL$^{2}$C requires fewer steps and less time to find optimal cutting parameters compared to various RL-based optimization methods. Specifically, RL$^{2}$C reduces the number of optimization steps by up to 12.5\% and processing time by up to 81.8\% compared to existing methods. This study demonstrates the potential of RL in industrial laser-cutting processes by improving cut quality, reducing time and film wastage, and minimizing manual interventions.

0.65

Inverse Modeling for Laser Pulse Shape Design in Inertial Confinement Fusion

cs.AI cs.LGeess.SYhep-ex ·2026-10-22 ·Ricardo Luna Gutierrez, Vineet Gundecha, Rahman Ejaz, Varchas Gopalaswamy, Riccardo Betti +3 more
similarity 0.57
Abstract · Initial version submitted to NeurIPS 2026 pending publication

The achievement of practical fusion energy remains one of the most pressing unsolved scientific challenges, with immense implications for carbon-free power. A critical factor in the success of Inertial Confinement Fusion (ICF) is the design of a Laser Pulse Shape (LP) that can optimally drive implosions under stringent physical constraints. Traditional LP design relies on computationally expensive simulations and manual iterative refinement. We introduce the ICF Laser Pulse Shape Design System (LPDS), a generative inverse modeling framework that maps desired outcomes and target pellet configurations directly to optimized LPs. Crucially, we design a multi-objective loss function to ensure the generated LPs satisfy fundamental physical constraints and experimental requirements. Furthermore, we present constraint-conditioning, inpainting, and gradient-based LP editing mechanisms for fine-grained control over specific pulse characteristics during generation. Moreover, we study the transfer of our framework to a limited set of real experimental shots. Our method establishes a data-driven inverse design framework for LP design in ICF, contributing to the advancement of practical and sustainable fusion energy.

0.26

Generative World Models Enable Predictive Control of Laser Melt Pool Dynamics

cs.LG ·2026-10-05 ·Yiyang Yan, Markus Bambach, Mohamadreza Afrasiabi
similarity 0.55
Abstract

World models, which learn how environments respond to actions, are emerging as a powerful paradigm for planning through imagined futures, transforming decision-making across games, robotics and autonomous driving. Bringing this capability to manufacturing could enable process decisions on timescales inaccessible to high-fidelity simulation. Here we introduce a generative world model for localized highly dynamic laser melt pool that predicts evolution from histories of temperature and phase morphology under candidate actions. Its generative latent dynamics capture the effects of unresolved melt flow, enabling more accurate recursive rollouts than deterministic regressors under transient laser inputs. Because the learned dynamics are differentiable, the model can serve directly as a predictive control plant. Gradients through imagined futures optimize laser schedules that regulate melt-pool depth over previously unseen geometry, path, initialization. We further distil this optimization into an amortized policy that produces control actions in a single forward pass, providing a proof of concept for real deployment on machines.

0.22

Torch-DPhys: A Torch-Native, MOOSE-Compatible Framework for Differentiable Physics Simulation and Hybrid Machine Learning Integration

cs.LG ·2026-10-16 ·Akzhol Almukhametov, Yang Liu
similarity 0.54
Abstract

We present Torch-DPhys, a Torch-native framework implemented in PyTorch for differentiable physics simulation and hybrid physics-machine learning. It implements selected thermal-hydraulic modeling concepts and discretizations from MOOSE's Thermal Hydraulics Module and the System Analysis Module (SAM), with a preliminary extension to continuum mechanics. Native tensor residuals support CPU and GPU execution, compilation of selected numerical kernels, and sparse direct linear solves. Sensitivities are obtained by differentiating executed numerical operations or through discrete adjoints of converged residual equations. Verification combines analytical solutions, reference-code comparisons, and derivative checks. Demonstrations cover plane-strain elasticity, one- and two-loop thermal-hydraulic transients, and an axisymmetric molten-salt fast reactor. For the reactor, comparison with SAM-Lite gives a maximum normalized field discrepancy of 1.13 x 10^-5 over 200 adaptive time steps, demonstrating agreement between the tested discrete implementations. Selected transient sensitivities are assessed using tangent-linear calculations and finite differences on fixed time schedules. Two applications illustrate the framework's connection between simulation and optimization. A residual-adjoint parameter-identification calculation recovers nominal pump head and heating power with relative errors below 0.06% from noiseless synthetic MOOSE observations. A separate three-loop plant demonstration uses solver-in-the-loop training of a predictive controller by differentiating trajectory-level objectives through the thermal-hydraulic simulation. These examples illustrate a foundation for gradient-based inference, control, and coupled physics-machine learning models in nuclear engineering.

0.41

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

cs.LG ·2026-11-19 ·Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman
similarity 0.54
Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

0.33

Physics-based prediction, uncertainty quantification and decision-making for IN718 crystallographic texture intensity across LPBF defocus regimes

cs.LG cond-mat.mtrl-scics.CE ·2026-09-16 ·Yisheng Lu, John Riris, Jie Song, Yao Fu, Jie Chen
unusual similarity 0.54
Abstract · 69 pages, 9 figures, 9 tables. Includes supplementary material (S1-S7)

Reliable prediction of crystallographic texture in laser powder bed fusion is critical for linking process conditions with anisotropic response and for qualification. However, black-box models may fail under shift and cannot distinguish weak data support from loss of physical validity. This study develops a two-stage physics-based model for <001> || BD (build direction) texture in Inconel 718. Stage 1 maps process variables to melting mode and melt pool geometry. Stage 2 predicts texture by combining an empirical physics model with a random-forest residual model. A k-nearest-neighbor weight attenuates residual corrections for poorly supported queries, while a study-specific areal beam-power-density criterion withholds predictions outside the adopted conduction envelope. Conformal intervals are evaluated on the retained physics-valid set, and SHAP and Sobol analyses assess residual sensitivity. Under a controlled leave-one-defocus-out evaluation, the physics anchor achieved R^2 = 0.778, against -0.001 for the black-box model and 0.750 for the gated hybrid. Under leave-one-group-out cross-validation, the gated hybrid reached R^2 = 0.592 against 0.538 for the black-box model. Retained-set coverage was 92.9% at a mean full width of 3.65 multiples of a uniform distribution (MUD) under grouped cross-validation and 100% at a width of 3.21 MUD under transfer to a withheld +80 mm defocus regime. An illustrative mapping produced a retained BD elastic-modulus span of 127-187 GPa. On nine conditions from a separately built sample set, the framework withheld three, attenuated three, and matched the measured ordering for the rest. Separating data applicability, physics validity, and predictive uncertainty into distinct decisions lets the framework transfer where an unconstrained model does not, and withhold predictions where no model class performs adequately.

0.34