CS Paper Radar

AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

Olabode T. Ajenifujah, Amir Barati Farimani

cs.AI ·submitted 2026-11-03 16:38 UTC · v1
benchmark

Abstract

Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language model (LLM) agent that gives process engineers natural-language access to CFD-trained surrogates of spatter and melt pool geometry for SS316L through the Model Context Protocol (MCP). Polynomial surrogates trained on 279 single-track simulations predict melt pool dimensions ($R^2 \geq 0.95$) and spatter volume ($R^2 = 0.83$ on test data) at any power-velocity point in the trained range, and geometric criteria assign each point a geometry-derived defect regime (keyhole, lack of fusion, balling or stable) that matches the regime obtained from the simulated geometry in 93.4% of tracks under cross-validation. The agent selects and parameterizes tools for prediction, process-window scans and constrained optimization. Minimum-spatter optima often sat within 10 $μ$m of the lack-of-fusion boundary; a margin-aware optimizer moved them away from all thresholds and raised the estimated probability of remaining classified Good from 0.94 to 1.00 under an assumed 2% process drift, and from 0.72 to 0.91 when jointly sampled cross-validated geometry residuals were added. About 40-50 well-spread simulations sufficed to reproduce the defect map. To evaluate the agent layer, we introduce a 145-prompt benchmark scored against direct tool calls, plus eight prompts (40 runs) on margin-aware requests. Over the 725 runs of the main benchmark the agent passed the intended inputs in 98.5% of parsing prompts, reported the scored spatter values and defect classes faithfully and met every stated constraint in the 65 feasible optimization runs, within a median 1.0% of the brute-force optimum.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

cs.AI cs.LG ·2026-11-19 ·Rafid Enayet, Imtiaz Ahmed, Md Habibor Rahman
benchmark similarity 0.64
Abstract

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.

0.32

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

eess.SY ·2026-09-23 ·Lauren Bogo, Adam Clare, Dominic Liao-McPherson
published similarity 0.61
Abstract · 7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

0.37

Provenance-tracked, experimentally validated neural operator surrogates of three-dimensional laser melting with keyholes and free-form paths

cs.CE cs.LG ·2026-11-05 ·Alix Benoit, Elia Iseli
similarity 0.60
Abstract · Main text: 44 pages, 13 figures, 7 tables. Supplementary Information: 19 pages, 9 figures, 3 tables

A three-dimensional thermo-fluid-dynamic simulation of laser melting resolves the melt pool and vapor depression but costs from one to thousands of core-hours per track. We train FNO, RIGNO and GAOT neural operators that predict the temperature, melt-pool and free-surface fields. Our datasets comprise 3D temperature and melt geometry fields covering lack-of-fusion to keyhole conditions under varied laser power, scan speed, beam radius, beam shape and preheat, and include free-form scan paths with speed changes and up to four beams. We generate them with FLOW-3D WELD, using solver settings validated against published measurements for four materials. We implement an AiiDA framework to store the provenance of every simulation, model and evaluation, so each tabulated metric traces back to the solver and model inputs behind it. On held-out simulations, the best architecture scores below 2 % relative temperature error on quasi-steady straight tracks, below 4 % on single-beam free-form paths and about 5 % with two to four beams. Inference takes under a second per predicted arbitrary time step on our single-GPU setup. We extend a surrogate trained on Ti-6Al-4V to Inconel 718 by growing its training set autonomously, and the extended models reach a relative temperature error of about 3 % or less on both Inconel 718 and Ti-6Al-4V. At 20 Ti-6Al-4V and Inconel 718 conditions held out of training, the two-alloy RIGNO predicts melt-pool and vapor-depression depths within 30 % of published measurements, and its depths differ from FLOW-3D at the same conditions by 2 % on average. Furthermore, these results provide a scalable framework which can readily be applied to computationally intensive simulations in fields other than laser melting.

0.36

AI agents can redesign engineering parts with more than a thousand CAD parameters and nonlinear simulations

cs.AI ·2026-11-19 ·Alexandra Starostina, Alexander Hermann, Mahish Guru, Kartik Bali, Roland Aydin +1 more
similarity 0.60
Abstract

Simulation-driven design of real engineering components has to meet three conditions at once. It runs on few solves, since a nonlinear finite-element simulation of a 3D part takes hours; its design space has many values, the hundreds to thousands of values of the part's CAD model; and a better design often needs a redesign, coordinated changes of the part's proportions rather than local polishing of its surface. Automated optimisers meet at most two of these conditions. Classical optimisers, Bayesian or derivative-free, need a person to cut the design down to a few parameters, and on all the values they need far more solves; industrial shape optimisers move every surface node of the mesh in one solve per cycle, but only in small steps that polish rather than redesign. We ask whether a general-purpose large language model (LLM) can meet all three by joining what it knows with what the simulation shows. GPT-6 Astra edits a magnesium stent through a CAD geometry parametrisation of about 1,650 values, with a budget of 15 simulations; every proposal is built in CAD, meshed and simulated with large-deformation plasticity and contact, and the LLM reads the full results of every solve. Within that budget it lowered the objective, a high percentile of the strains in the stent's bends, by 32%; on the same budget, the industrial shape optimiser Tosca improved the original design by a tenth and then stopped improving. An earlier GPT-6 Astra design, 25% lower in the same objective, was checked in an independent, higher-fidelity model of the full deployment with crimping and damage: it was 14% less strained than the original after the full chain, and its most damaged spot began to fail later and carried 63% less damage at full expansion. LLMs can thus join their learned knowledge with simulation data to adjust more than a thousand design values and reach valid designs with real improvements.

0.26

little m: An AI Agent for Industrial Process Optimization

cs.AI ·2026-09-15 ·Yongchao Ye, Xinyu He, Dutliff Boshoff, Way Kuo, Lishuai Li
top venuebenchmarkcode/data similarity 0.58
Abstract

Manufacturing consumes one third of global energy and still has significant room for improvement in terms of energy efficiency. Optimal process control is essential for this purpose. However, synthesizing mathematical optimization models from messy, real-world industrial specifications requires bridging unstructured natural language and spatial diagrams with rigorous mathematical syntax. This poses a profound challenge for general-purpose Large Language Models (LLMs), which may introduce invalid constraints when tasked with modeling continuous multi-physics dynamics. To address this, we introduce little m, an AI agent designed to assist the formulation of industrial process control models. Combining a domain-specific knowledge repository with LLM-driven interaction, the proposed framework formulates real-world optimization problems as mathematical models. For systematic evaluation, we introduce the Industrial Process Control Benchmark (IPC-Bench), a novel multimodal dataset of 50 canonical scenarios requiring joint reasoning over text and process diagrams. Through comprehensive automated structural assessments and double-blind human evaluation, little m substantially outperforms state-of-the-art LLMs, generating semantically correct models. These evaluations assess formulation quality rather than solver feasibility, formal physical validity, or closed-loop industrial performance. The implementation of little m and the IPC-Bench dataset are available at https://github.com/yeyongchao/process-modeling-benchmark.

0.47

Agentic AI-Assisted Modeling for Production Scheduling: Assessment in Constraint Programming

cs.AI cs.SE ·2026-10-07 ·Ángel Sánchez-Fernández, Javier Pernas-Álvarez, Diego Crespo-Pereira
hot direction similarity 0.58
Abstract · 29 pages, 9 figures

Developing optimization models for production scheduling requires substantial expert effort. Research on large language models (LLMs) has followed two directions: specialized approaches for automated modeling, mostly for mixed-integer linear programming, which often rely on dedicated training or problem-specific architectures that limit industrial deployment; and agentic artificial intelligence for operational decision support, which generally assumes that the optimization model already exists. This study bridges both directions by assessing whether general-purpose LLMs, orchestrated as agents without task-specific training, can formulate and implement constraint programming models from natural-language problem descriptions. Singleagent and multi-agent architectures are integrated with a Model Context Protocol server that provides context-aware retrieval of solver documentation to mitigate hallucinations during implementation. Both are compared with a direct LLM baseline on six industry-oriented problems covering flow-shop, job-shop, flexible job-shop and resource-constrained warehouse scheduling, using three LLMs and assessing modeling accuracy, execution success, latency and token consumption. Formulation proves largely within reach of current LLMs, whereas implementation is the main barrier. The multi-agent workflow raises the share of scripts that run correctly as generated from 14.8% with a direct LLM call to 59.3%, reaching 80.6% on the four less complex problems, while tightly coupled intralogistics models remain an open challenge.

0.26

Harnessing Language Models as Optimization Modeling Agents

cs.AI ·2026-10-22 ·Yunxiang Luo, Xin Xu, Tianhao Chen, Zhixi Xiong, Peiqi Jiang +5 more
similarity 0.57
Abstract

Large language models (LLMs) can translate natural-language optimization problems into solver programs, but reliably producing correct formulations and implementations remains challenging. Existing approaches improve optimization modeling through agentic workflows or task-specific post-training. This raises a practical question: can a lightweight harness using a single model role achieve competitive performance without additional training? We introduce OPTICYCLE and OPTISTATE, two lightweight inference harnesses for optimization modeling, and evaluate them on nine benchmarks comprising 2,634 problems using 11 Qwen variants spanning 0.6B-27B parameters. Our results show that execution-guided revision consistently improves macro accuracy over direct generation for all evaluated models, with gains of up to 49.46 percentage points. Despite their simplicity, both harnesses outperform six adapted agentic workflows in same-model comparisons and four evaluated post-trained optimization models at comparable model sizes, without additional training. Explicit formulation state provides further but model-dependent improvements, suggesting that additional structure is not universally beneficial.

0.16

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

cs.LG ·2026-11-19 ·Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman
similarity 0.56
Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

0.33