CS Paper Radar

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman

cs.LG ·submitted 2026-11-19 16:07 UTC · v1

Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

cs.AI cs.LG ·2026-11-19 ·Rafid Enayet, Imtiaz Ahmed, Md Habibor Rahman
benchmark similarity 0.63
Abstract

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.

0.32

Predicting build orientation for SLM dental parts: a comparison of rotation representations and direct vector regression

cs.AI cs.CV ·2026-09-14 ·Felix Schmalzel, Reimar Waitz, Moritz Kronberger, Thorsten Schöler
similarity 0.57
Abstract

Build orientation for selective laser melting (SLM) manufacturing of dental parts is usually chosen manually by technicians. We treat orientation prediction as supervised machine learning of the part's up-axis from technician-labeled production data, and test which rotation representations produce the best results. Using $n\approx2400$ patient-specific dental parts, we trained a ResNet-50 multi-view image backbone and a PointNeXt-S point-cloud backbone, both pretrained and fine-tuned end-to-end, on 13 up-axis representations spanning six classical $SO(3)$ parameterizations and seven representations defined directly on the unit sphere $S^2$. We report the geodesic angular error between predicted and ground-truth up-axis on a test set, with and without test-time augmentation (TTA) over $K=21$ known rotations. With TTA, the octahedral map achieves the lowest mean angular error ($10.6^\circ$, ResNet-50). The three lowest-error results overall are direct $S^2$ representations, though this may reflect label noise in the unsupervised in-plane component of the $SO(3)$ targets rather than a topological advantage. von Mises-Fisher collapses to a near-constant prediction when trained with PointNeXt-S but not with ResNet-50. TTA reduces mean angular error by 31-73 % across almost every representation and backbone. Overall, test-time augmentation over a small set of known rotations is the most consistent driver of accuracy, whereas the best-performing representation is strongly backbone-dependent.

0.26

AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

cs.AI ·2026-11-03 ·Olabode T. Ajenifujah, Amir Barati Farimani
benchmark similarity 0.56
Abstract

Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language model (LLM) agent that gives process engineers natural-language access to CFD-trained surrogates of spatter and melt pool geometry for SS316L through the Model Context Protocol (MCP). Polynomial surrogates trained on 279 single-track simulations predict melt pool dimensions ($R^2 \geq 0.95$) and spatter volume ($R^2 = 0.83$ on test data) at any power-velocity point in the trained range, and geometric criteria assign each point a geometry-derived defect regime (keyhole, lack of fusion, balling or stable) that matches the regime obtained from the simulated geometry in 93.4% of tracks under cross-validation. The agent selects and parameterizes tools for prediction, process-window scans and constrained optimization. Minimum-spatter optima often sat within 10 $μ$m of the lack-of-fusion boundary; a margin-aware optimizer moved them away from all thresholds and raised the estimated probability of remaining classified Good from 0.94 to 1.00 under an assumed 2% process drift, and from 0.72 to 0.91 when jointly sampled cross-validated geometry residuals were added. About 40-50 well-spread simulations sufficed to reproduce the defect map. To evaluate the agent layer, we introduce a 145-prompt benchmark scored against direct tool calls, plus eight prompts (40 runs) on margin-aware requests. Over the 725 runs of the main benchmark the agent passed the intended inputs in 98.5% of parsing prompts, reported the scored spatter values and defect classes faithfully and met every stated constraint in the 65 feasible optimization runs, within a median 1.0% of the brute-force optimum.

0.27

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

eess.SY ·2026-09-23 ·Lauren Bogo, Adam Clare, Dominic Liao-McPherson
published similarity 0.54
Abstract · 7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

0.37

Transferring local rib responses to new component geometries in sheet forming with a graph-based Transformer

cs.LG ·2026-11-06 ·Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li
similarity 0.53
Abstract

Sheet metal components often consist of a global geometry, such as the corner radii and forming depth of a corner component, and local features added to it. During forming, both affect material flow. A surrogate learning all their combinations may need large training data. However, the same local feature type is often used on many global geometries. This study therefore partly decouples local features from the global geometry. The local-feature effect is first learned on one global geometry, needing fewer simulations than learning all combinations, then transferred to other global geometries via transfer learning, which can need fewer target simulations than training from scratch. A baseline-conditioned residual surrogate, R-BiLoGo, is proposed for ribs on the side walls of hot-stamped corner components. Its inputs are the baseline response and the geometric perturbation introduced by the ribs. Its outputs are the changes in displacement and thinning from the baseline. R-BiLoGo gave lower errors than a hierarchical graph-based model and a Transolver-based model on the source geometry, and on two of three selected target geometries after transfer. Across the 22 target geometries, transfer learning with 20 target simulations gave errors similar to or lower than training from scratch with 80 target simulations for about half of the targets. With the same 80 target simulations, transfer learning reduced errors for 95% of targets. The effect of the global geometry on transfer was studied with four parameter-free geometric descriptors and controlled variations across 4 corner subclasses. The benefit of transfer decreased with increasing surface distance and high-curvature change between source and target, and for targets shallower than the source. These trends were also seen in other corner types with a different magnitude.

0.28

Federated Physics-Informed Thermal Field Prediction Across Unseen Geometries in Distributed Additive Manufacturing

cs.LG ·2026-11-13 ·Amirul Islam Saimon, Zhenyu James Kong
benchmarkcode/data similarity 0.53
Abstract

In additive manufacturing (AM), each change in part geometry requires a new thermal simulation, which makes design evaluation over many candidates costly. Geometry-aware models reduce this cost by predicting thermal fields on unseen parts with a single learned model, but they assume that diverse geometries are available centrally. This assumption is restrictive when each manufacturing site holds only a limited set of proprietary part designs that it cannot share. We propose Fed-PIGANO, a federated framework that trains physics-informed geometry-aware neural operator (PI-GANO) models at individual sites and aggregates their geometry encoders and prediction networks without sharing part geometries. We evaluate the framework on a 2D steady-state thermal benchmark for metal AM, with geometries from five polygonal families distributed across three sites under four scenarios that range from identical to strongly different family compositions. Over seven replications, Fed-PIGANO achieves mean relative L2 errors of 1.83% to 2.04% across all 12 scenario-site cases, compared with up to 20.46% for local-only training, and consistently yields lower PDE residuals. Its prediction accuracy is comparable to that of a centralized model trained on the pooled geometries of all sites. These results demonstrate that federated learning lets manufacturing sites benefit from each other's geometries without sharing them, enabling rapid thermal prediction on new part designs for tasks such as shape optimization, inverse design, and uncertainty quantification.

0.26

Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication

cs.LG cs.CEstat.CO ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedhighly cited similarity 0.52
Abstract · 11 pages, JOM (Journal of The Minerals, Metals & Materials Society)

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

0.63

Hemispherical Ray-Casting Analysis for Milling Configuration Classification and Machinability Assessment

cs.CE ·2026-08-18 ·Serafeim Baltadouros, Joost R. Duflou, Bert Lauwers
published similarity 0.52
Abstract · Presented at the 20th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME '26)

Early-stage manufacturability assessment reduces design iterations and costly downstream changes. This paper presents a GPU-accelerated geometric analysis method that evaluates CNC machinability and setup requirements directly from CAD files. A multi-stage pipeline uses hemispherical ray-casting to quantify surface accessibility, followed by directional variability analysis to extract dominant machining axes. Threshold-based classification determines 3-axis versus multi-axis machining. For 3-axis parts, orthogonal ray-casting and reachability optimization compute the minimum setup count and explicitly flag inaccessible surfaces. Validation cases show computation times sufficiently short to support interactive CAD workflows, enabling quantitative manufacturability feedback during the design stage without requiring manufacturing expertise.

0.40