CS Paper Radar

Predicting build orientation for SLM dental parts: a comparison of rotation representations and direct vector regression

Felix Schmalzel, Reimar Waitz, Moritz Kronberger, Thorsten Schöler

cs.AI cs.CV ·submitted 2026-09-14 15:13 UTC · v1

Abstract

Build orientation for selective laser melting (SLM) manufacturing of dental parts is usually chosen manually by technicians. We treat orientation prediction as supervised machine learning of the part's up-axis from technician-labeled production data, and test which rotation representations produce the best results. Using $n\approx2400$ patient-specific dental parts, we trained a ResNet-50 multi-view image backbone and a PointNeXt-S point-cloud backbone, both pretrained and fine-tuned end-to-end, on 13 up-axis representations spanning six classical $SO(3)$ parameterizations and seven representations defined directly on the unit sphere $S^2$. We report the geodesic angular error between predicted and ground-truth up-axis on a test set, with and without test-time augmentation (TTA) over $K=21$ known rotations. With TTA, the octahedral map achieves the lowest mean angular error ($10.6^\circ$, ResNet-50). The three lowest-error results overall are direct $S^2$ representations, though this may reflect label noise in the unsupervised in-plane component of the $SO(3)$ targets rather than a topological advantage. von Mises-Fisher collapses to a near-constant prediction when trained with PointNeXt-S but not with ResNet-50. TTA reduces mean angular error by 31-73 % across almost every representation and backbone. Overall, test-time augmentation over a small set of known rotations is the most consistent driver of accuracy, whereas the best-performing representation is strongly backbone-dependent.

Closest papers

Nearest neighbours by meaning across the whole index.

KASALv2: Fully Automatic 3D Rotational Symmetry Classification and Axis Localization

cs.CV cs.AIcs.GR ·2026-10-07 ·Mengxin Zhang, Yulin Wang, Chen Luo, Yongzhe Li, Yijun Zhou
top venuecode/data similarity 0.61
Abstract · CVPR 2026. 10 pages, 4 figures. Mengxin Zhang and Yulin Wang contributed equally. Corresponding authors: Chen Luo and Yijun Zhou

Rotational symmetry is an important prior in 6D pose estimation, improving pose accuracy and supporting symmetry-aware evaluation. However, current symmetry annotations for 3D objects remain largely manual or semi-automatic, often requiring predefined types or orders, which limits scalability. This work introduces a fully automatic, reference-free framework for symmetry-type classification, rotational-order identification, and full-axis localization across all eight canonical 3D rotational symmetry types. The method localizes a dominant high-order axis, infers its rotational order through self-consistency analysis, and reconstructs the complete symmetry structure under a hierarchy-guided formulation. A texture-aware extension further models appearance-induced reductions in rotational order while preserving axis orientations. Experiments on idealized and real-world datasets demonstrate strong accuracy and generalization, achieving 94.75% accuracy on 438 symmetric objects in GSO. Training FoundationPose with these priors improves accuracy by up to 0.9% across five BOP datasets, showing that automatically estimated rotational priors improve downstream 6D pose estimation. Code is available at https://github.com/WangYuLin-SEU/KASAL.

0.50

Rotational Equivariance in Machine Learning: A Comprehensive Tutorial

cs.LG ·2026-08-31 ·Peter Lippmann, Fred A. Hamprecht
similarity 0.60
Abstract

Rotational symmetry is one of the most important structural principles in machine learning on 3D data. In applications ranging from physics and materials science to 3D computer vision, predictions should not depend on an arbitrary choice of coordinate frame. Rotational equivariance captures this requirement mathematically by enforcing that a rotation of the input induces a corresponding transformation of the model output. This tutorial provides a comprehensive introduction to rotational equivariance, starting from the physical and geometric intuition behind coordinate independence and building up the necessary machinery from geometric deep learning, group theory, and representation theory. We introduce message passing on Euclidean graphs, group actions and representations, spherical harmonics, Wigner matrices, tensor products, and Clebsch-Gordan decomposition, and explain how these ingredients give rise to modern equivariant architectures. We then survey the principal strategies for incorporating rotational equivariance in deep learning, including group convolutions, internal tensorial representations, and canonicalization-based methods, and discuss their practical strengths and limitations. The tutorial aims to lower the barrier to the subject by connecting the underlying mathematics to practical model design, by unifying ideas that are often expressed in different formal languages, and by helping practitioners choose among competing approaches through a clear discussion of their trade-offs.

0.11

How Do Transformers Learn to Represent Symmetries?

cs.LG ·2026-10-07 ·Eduardo Santos-Escriche, Valerie Engelmayer, Ya-Wei Eileen Lin, Stefanie Jegelka
top venuecode/datahot direction similarity 0.60
Abstract · Accepted at NeurIPS 2026

Training Transformer-based architectures with finite data augmentation has become an increasingly popular approach in geometric machine learning. Despite its empirical success, the interplay between the Transformer architecture, invariance to different symmetries, and augmentation budgets remains underexplored. In this paper, we study the ability of a vanilla Transformer to learn various symmetries through finite data augmentation for point cloud datasets. We identify an ordering of increasing learnability across the following symmetry groups: (i) non-angle-preserving symmetries, (ii) angle-preserving symmetries, and (iii) base angle-preserving subgroups, such as translation, rotation, and scale. For the base angle-preserving groups, we further investigate the Transformer's extrapolation behavior and conduct a structural analysis of the trained models, allowing us to identify interpretable mechanisms that induce invariance. Finally, we extend our analysis to equivariant functions and show that the detected mechanisms for approximate invariance can also provide a key building block for learned equivariance. Our project page is available at https://transformers-learn-symmetries.github.io/

0.55

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

cs.LG ·2026-11-19 ·Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman
similarity 0.57
Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

0.33

TexFlow: learning crystallographic texture on SO(3) manifold via normalizing flows

cs.CE cond-mat.mtrl-sci ·2026-10-20 ·Gowtham Nimmal Haribabu, Tarakram Ramgopal, Divakar Vetriveeran, Siddhant Kumar
similarity 0.57
Abstract · 43 pages, 18 figures

Crystallographic texture is an important microstructural feature that statistically describes the orientations of grains in polycrystalline materials. Conventional texture analysis relies on the orientation distribution functions and pole figures, which are essential for interpreting the texture of a given material specimen but do not, by themselves, provide a direct framework for predictive modeling of process-structure-property linkages. Data- and machine learning-based approaches offer a means to address this gap; however, a key challenge lies in developing representations and learning frameworks that account for the manifold structure of rotations. In particular, many existing machine learning techniques are designed for Euclidean data and therefore are not readily applicable to rotations in the non-Euclidean group $\text{SO}(3)$. Here we introduce TexFlow, a conditional normalizing flow framework for texture modeling that learns a probability distribution over rotations in $\text{SO}(3)$ by construction. Rotations are encoded in a six-dimensional Gram-Schmidt orthogonalization representation which is then mapped back to valid rotations $\mathbf{R}\in\text{SO}(3)$. The framework supports conditional probabilistic modeling of texture $p(\mathbf{R}|c)$, where $c$ may represent processing parameters like temperature or deformation state. To complement conventional texture-analysis visualizations, such as pole figures and sections of the orientation distribution function, we further introduce Hopf-fibration visualizations as a compact global representation of texture. TexFlow is validated on both unconditional and conditional experimental and simulated texture datasets spanning diverse material systems. We show that TexFlow can accurately capture multimodal textures and their conditional evolution, providing a data-driven framework for establishing process-texture linkages.

0.28

Biomechanical 3D Body: Self-Supervised Distillation of Biomechanical Pose from a 3D Body Foundation Model

cs.CV ·2026-08-30 ·R. James Cotton, J. D. Peiffer, Lucinda Williamson, John Leske, Georgios Pavlakos
publishedcode/data similarity 0.56
Abstract · Accepted to the ECCV 2026 Workshop MoCha

State-of-the-art monocular body recovery methods predict mesh vertices and angles on the corresponding kinematic tree, but their outputs lack biomechanically defined joint angles that downstream applications like clinical and biomechanical analyses require. We extend an existing foundation model, SAM-3D-Body, with an additional biomechanical prediction head that, from a single RGB image, regresses the joint angles and scales of a biomechanical model. Training this model presents a challenge, as there are limited datasets of paired images and biomechanical fits. To overcome this, we supervise biomechanical outputs with in-loop optimized targets from a Levenberg-Marquardt solver performing inverse kinematics fits against markers from the mesh predictions. This allows distilling the biomechanical head from the mesh head, even from unlabeled images. To make this work with GPU-optimized biomechanical models in MuJoCo, the entire model was implemented in JAX using Equinox. We trained this distilled output head on the publicly released SAM-3D-Body dataset. We then validated this model on biomechanical fits to two publicly available marker-based datasets, MoVi and BioCV, as well as movements from a clinical cohort captured with multiview markerless motion capture. The resulting model outperforms existing models for direct regression of biomechanics from images while only slightly underperforming the state-of-the-art monocular biomechanics method that performs more costly inference-time optimization of entire trajectories.

0.51

Fine-Tuning VLM for Enhancing AI's Spatial Intelligence: Understanding 3D and 2D Rotations

cs.AI ·2026-10-03 ·Uttamasha Monjoree, Wei Yan
similarity 0.56
Abstract

Spatial intelligence is a fundamental skill in multiple domains, such as Science, Technology, Engineering, and Mathematics (STEM), Medicine, Architecture, and Construction. Recent studies indicate that Vision-Language Models (VLMs) still face limitations in spatial reasoning, which inhibits artificial intelligence (AI) from performing practical spatial tasks. Using multiple object-rotation datasets developed for training and evaluation, our experiments demonstrated promising improvements in both 2D and 3D rotation detection. Fine-tuned Google DeepMind-built Gemma-4 mixture-of-experts (MoE) models significantly outperformed fine-tuned Gemma-4 generalist models in predicting rotations defined by both their axes and angles. Fine-tuning also substantially improved angle estimation for 2D representation without requiring an explicit coordinate system. Furthermore, identifiable objects did not improve angle-detection accuracy; instead, objects with prominent linear features showed improved performance.

0.24

Do We Still Need Rotation-Invariant Architectures? A Statistical Robustness Benchmark for Point Cloud Classification

cs.CV cs.LG ·2026-11-02 ·Abdulla Nasir Chowdhury, Gulpi Qorik Oktagalu Pratamasunu, Kazuhiro Fukui
publishedbenchmark similarity 0.55
Abstract · Accepted to 2nd Round of WACV 2027, 24 pages (8 main + appendix). Website: https://abdullah-nasir-chowdhury.github.io/projects/wacv2027/

A substantial line of work builds rotation invariance directly into point cloud architectures. We benchmark 10 architectures (PointNet, PointNet++, DGCNN, RIConv, RIConv++, RISurConv, PointMLP, PointTransformer, and the equivariant VN-PointNet and VN-DGCNN) across 5 domains under pose, noise, and occlusion, and analyze the results with confirmatory hypothesis tests rather than point estimates. The three rotation-invariant (RI) architectures achieve the best pose robustness but rank among the lowest on noise robustness in 4 of 5 domains. We ask whether this cost is intrinsic to invariance or specific to how invariance is obtained. We retrain all 10 architectures unchanged, with a simple invariance loss on the embedding and three training seeds each, and evaluate all models on the independently designed ModelNet40-C. Invariance training transfers narrowly but reliably. It improves exactly the corruption families its perturbations target wherever the baseline has headroom (mean occlusion +10.5, lidar +13.4 percentage points of accuracy). At matched training budget the best standard backbone and the best RI architecture end on par on unseen corruptions (within 2.5 percentage points in every seed), and invariance-trained RIConv++ is the most seed-stable top model. Once rotation augmentation is widened, standard backbones concede only a flat, angle-independent accuracy offset under full-sphere rotation. We release the benchmark along with a package for analyzing point cloud robustness and reproducing our results.

0.51